1.5 Inch Cam Buckles
We handle inquiries for bare metal cam buckle components sized for 1.5 in nominal webbing. Send your webbing slot, clamping interface and material needs, and our factory team will review them with you before we quote.
Catalog family reference; configuration is specified with your quotation.
Sourcing the Buckle, Not Just the Strap
A 1.5 inch cam buckle is bought as a separate component, so the decision comes down to how it grips the webbing you already use. We start from your webbing slot, thickness and clamping interface, and we treat the finished strap as a different inquiry with its own checks.
Select a 1.5 Inch Cam Buckle Configuration
Before we quote a 1.5 inch cam buckle, send us the webbing slot width and thickness it must accept, the clamping interface you expect, the body and lever material you need, the surface finish, and the component documentation your team requires. We confirm those details with you for the quoted configuration. Nominal inches describe webbing compatibility, not body size.

Cam Buckle HC380080
Nominal 1.5 in metal cam buckle family (catalog p. 17). Reference HC380080 recorded on purchase request form p. 5.
300 pieces per carton
Catalog family reference; configuration is specified with your quotation.
Your Own Configuration
Working from a different slot, interface, material or finish? Share your drawing or photo, and we will review the configuration with you in the quotation.
Match the Clamping Interface to Your Webbing
The first choice is how the buckle holds the webbing: the slot must accept your webbing width and thickness, and the clamping face must suit the weave you use. Tell us the webbing you run today, and we will compare it to the buckle configuration before we discuss a sample. The specification sketch in the resources below shows which dimensions to give us. If you need the whole strap instead, see our custom tie-down straps page.


What to Check Before Sample Approval
Before you approve a sample, confirm that the drawing, the photo and the part in your hand all describe the same buckle. Check the body and lever material, the surface finish, and the component documentation we can supply for that exact configuration. A buckle figure is not a strap rating. If you are comparing finished straps, start at our ratchet straps page.
Send Your Buckle Requirements
Partial information is fine. Share what you have, and our factory team in Vietnam will ask for the rest.
How the Order Workflow Runs
- 1
Requirements and design
You share the webbing, interface and material needs, plus any drawing.
- 2
Preproduction specification review
We check the specification against the buckle drawing and photo.
- 3
Sample approval
You confirm the sample against the agreed specification.
- 4
Production
We produce to the approved configuration and packing agreement.
- 5
Shipping and payment review
We confirm freight and payment terms with you for the quoted order.
What to Specify for Your Quotation
Catalog page 17 shows our nominal 1.5 in metal cam buckle family, and the purchase request form (p. 5) records reference HC380080 at 300 pieces per carton. To quote your exact buckle, tell us the webbing slot width and thickness, the body dimensions you need in inches, the body and lever material or grade, the surface finish, and any documents your team requires. A bare buckle is a component, and any strength figure for a component is not the rating of a finished strap, which depends on the webbing, stitching and end fittings used with it. We confirm these details with you in the quotation for your configuration. Send Inquiry with whatever you already know, and add a drawing or photo if you have one.
Packaging and Accessories
Component Packing
The purchase request form records 300 pieces per carton for reference HC380080. Bags and cartons for other loose buckles are agreed per order, so tell us how your warehouse receives components, and we will confirm the packing in the quotation.

Companion Webbing and Hardware
The loose metal cam buckle shown is a catalog family reference (p. 17), not a part automatically included with another item. A companion part such as webbing or end hardware is reviewed as its own line against your specification. For complete straps, visit custom tie-down straps.
Buckle Resources
Specification sketch
- W — webbing slot width (in)
- L — body length (in)
- H — opening height (in)
Loose metal cam buckle family reference with a rectangular webbing slot and a hinged cam/press plate. No ratchet spool. No grade is assigned.
Buyer specification fields
- Nominal webbing/slot width (in)
- Body length, thickness and clearance (in)
- Cam/lever interface
- Material or resin grade and finish
- Component-specific rating/test evidence and pack quantity
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). Confirmed DEWIN nominal dimensions and reference codes stay in the product cards above; this sketch does not add supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
The generic schematic here explains the geometry. If you have your own configuration drawing, attach it when you request a quote, and we will review it with your quotation.
Third-party references
- Third-party reference US Cargo Control specification reference
- Third-party component drawing Cam Buckle Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing. Competitor values are not DEWIN specifications.
Factory Process Footage
Our factory in Vietnam has process footage of webbing looms, strap sewing and assembly, and a tensile-test machine. This footage shows how we work. It is not a performance test of a specific buckle model and does not establish a rating. Ask us about the footage that relates to your inquiry.
Buckle Catalog

Catalog p. 17 covers the metal cam buckle family, and the purchase request form (p. 5) records reference HC380080 at 300 pieces per carton. Tell us the configuration you need, and we will respond with the details for your quotation.
Why Send Your Buckle Inquiry to Our Factory
Our reasons are about how we handle your request, not about unproven performance. You work with the factory team directly, and each step is tied to documents you can review.
Direct Factory Review
Your request is read by the DEWIN factory team, so questions about the buckle go straight to the people who can answer them.
Component-First Questions
We ask about webbing slot, thickness and clamping interface first, so the buckle is not confused with a finished strap.
Drawing and Photo Matching
Send your own drawing or photo, and we review it together with the sample so the configuration is clear before production.
Terms Set in the Quote
Quantity, packing, timing and documents are confirmed in the quotation for your configuration, not assumed in advance.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
-
POLARIS
-
MULTIPRENS USA
-
FLOYD
-
TITAN
-
LocknLock
1.5 Inch Cam Buckle FAQ
What is the lead time for 1.5 inch cam buckles?
It depends on the configuration, quantity and documents required. Send your webbing slot, clamping interface, material and finish needs, and we will confirm timing in the quote for that build.
Can I get a sample after I place an order?
Sample handling is agreed for each inquiry. Tell us whether you want to approve a sample before production, and we will state the steps and terms in the quote.
How long does shipping take?
Shipping time depends on your U.S. destination, packing and freight terms. Include the destination in your inquiry, and we will confirm the shipping plan with your quotation.
How will I know the status of my order?
Your factory contact shares updates, and we agree how those updates reach you when the quote is confirmed. Please keep your order details handy when you ask for a status.
Can I request samples of a bare cam buckle?
You can ask. Availability depends on the confirmed configuration, and we do not assume free samples. Send the webbing, interface and material details, and we will confirm terms with the quote.
Related Buckle Articles
Three guides from our factory team help you prepare a purchasing brief. You can also browse the blog for other posts, or reach us through the contact page.

Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing that will run through your buckle.
November 15, 2026 · Guide

Tie-Down Hook and Ring Selection
A guide to anchor interfaces and the end hardware that pairs with your buckle and webbing.
November 15, 2026 · Guide

U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare your purchasing brief before you send an inquiry.
November 15, 2026 · Worksheet