1.5 Inch Polyester Webbing
DEWIN is a factory in Vietnam supplying polyester raw webbing to U.S. distributors, private-label and wholesale buyers. Tell us the nominal width, weave, thickness, color and length you need. Dewin Technology Company Limited reviews each specification with you before anything is quoted.
Raw webbing is bought by specification
Polyester raw webbing is a material purchase, not a finished strap. A 1.5 in nominal label can trace back to more than one source-catalog width, so we keep each source separate and never treat them as identical by assumption. We confirm width tolerance, weave, thickness, color and purchase unit with you first, then match them to a documented configuration.
Choose a webbing configuration
Start with the family or reference below, then confirm the following on your inquiry: polyester raw webbing only, nominal width in inches with tolerance, weave and thickness, color or print needs, roll length or cut-piece length in whole feet, the material performance data you require, and the packaging unit you buy in. Tell us whether a source catalog width must be matched.
Nominal 1.5 in polyester webbing family
The DW Straps catalog supports the nominal 1.5 in polyester webbing family. Weave, thickness, color, length and packing are specified with your quotation.
W380150100-OR
Orange polyester webbing reference from the purchase request form, p. 6. The code is a catalog reference only; roll length and pack count are confirmed in your quotation.
Lock the nominal width first
Every other field depends on width. Give us the nominal width in inches and the tolerance you can accept, and say whether it must match a width from a specific source catalog. We compare your request against each source on its own terms, so a similar-looking width is never swapped in without your approval.
Roll or cut pieces?
Decide how you will receive the webbing: full rolls or cut pieces, in whole feet, packed in the unit you buy. Before approving a sample, check the width, weave, thickness and color against your request, and confirm the stated length and packing unit in writing. Cut pieces are webbing only, with no hardware or stitching implied.
Need a finished assembly instead of raw webbing? See our ratchet straps or custom tie-down straps.
How an order moves
- 1
Requirements and design
You share the webbing brief, drawings or photos.
- 2
Pre-production specification review
We check width, weave, thickness, color and unit against your request.
- 3
Sample approval
You review the sample against the written specification.
- 4
Production
Our factory produces to the approved specification.
- 5
Shipping and payment review
Shipping and payment terms are confirmed in your quote.
What to specify for your quotation
This page covers polyester raw webbing, not a finished strap, buckle or lifting product, so no working load or breaking strength is stated here. The DW Straps catalog supports the nominal 1.5 in polyester webbing family, and the purchase request form (p. 6) lists the orange polyester reference W380150100-OR. To quote your webbing, tell us:
- Nominal width in inches and the tolerance you can accept, and whether it must match a specific source catalog width
- Weave and thickness in inches
- Color, print or edge finish
- Roll length or cut-piece length in whole feet, and the packaging unit you buy in
- Material grade and any performance data or documents you require, stated as your requirement
- Quantity and U.S. destination
Widths from different source catalogs are kept separate rather than assumed equal. To start, Send Inquiry.
Roll packing
If you buy by the roll, tell us the roll length in whole feet and how many rolls make a carton or pallet. We confirm the packing unit in your quote before production.
Related components and accessories
Raw webbing ships as webbing. A companion part, if your project needs one, is a separate item that we review separately with our factory team in Vietnam. It is not included automatically. Tell us which related parts your U.S. order requires; the exact items, quantities and compatibility are confirmed for the quoted configuration, along with any rating you need documented for that item.
Webbing resources





Specification sketch
Illustrative schematic — not to scale. Not an approved production drawing.
- W — nominal width, in inches (in)
- T — thickness, in inches (in), shown on the small end cross section
- L — supplied length, in whole feet (ft)
- Diagonal hatch is a symbolic weave pattern only. No numeric dimensions, strength values or roll length are shown or implied.
Buyer specification fields
- Material/polymer grade and weave
- Nominal width and thickness (in)
- Supply/cut length (whole ft)
- Color, print/marking or edge finish
- Raw-webbing break evidence, separate from assembly WLL
- Pack or roll requirements
Lengths of finished long straps and rolls use documented whole feet (ft); local component and short-end dimensions use inches (in). The sketch shows geometry only and does not set additional supply sizes.
We check the webbing roll label and width against the drawing before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
When you request a quote, you can attach your own configuration drawing and we will review it against the specification you send.
References
An original generic schematic is provided here. Attach your own drawing with your inquiry if you have one.
Third-party reference US Cargo Control specification reference
Third-party values are not DEWIN specifications, and no competitor ratings or dimensions are copied into our product specifications.
Strap sewing at our Vietnam factory. It shows a production process only and is not a performance test; it does not identify a specific webbing reference, width, grade or rating.
The DW Straps catalog supports the nominal 1.5 in polyester webbing family, and the purchase request form lists the orange reference W380150100-OR. Tell us the configuration you need and we will answer with the matching details in your quotation.
Why buyers start with a written brief
For raw webbing, the paperwork matters as much as the roll. Here is how our factory team keeps your request clear from first message to sample approval.
Specification first
We ask for width, weave, thickness, color and length before discussing a quote.
Sources stay separate
We record which catalog each width comes from and do not merge them silently.
Drawings and photos welcome
Attach a drawing or a product photo so we can compare it with the request.
Terms in the quote
Minimum order, packing, timing and documents are confirmed in the quote you receive.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. Ready to discuss your own brief? Send Inquiry.
Webbing FAQ
What is the lead time for 1.5 in polyester webbing?
Lead time depends on width, weave, thickness, color, length and quantity. Send those details and we confirm timing in the actual quote.
Can I get a sample after I place an order?
Sample approval is a step before production. Tell us what you need to approve and we state sample terms in your quote.
How long does shipping take?
Shipping time depends on quantity, packing unit, destination and the freight method chosen. We confirm it with your quote and order details.
How do I check the status of my order?
Contact our factory team with your order details and we reply directly. We do not offer an online tracking portal on this page.
Do you provide webbing samples?
Samples can be discussed once we have your specification. Whether a sample is free or paid, and how long it takes, is stated in the quote.
Webbing buying guides
Three guides for buyers who specify polyester raw webbing and tie-down straps. Browse our blog for more.
Polyester, Nylon and Polypropylene Webbing
Compare the three webbing materials so you can name the right one in your inquiry.
Tie-Down Hook and Ring Selection
How hooks and rings connect a strap to the anchor point, and what to state in your brief.
U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare the purchasing brief you send to our factory team.