Dewin Technology Company Limited · Factory in Vietnam
1 Inch Cam Buckle Straps
We make polyester cam buckle straps for U.S. distributors, private-label brands and hardware wholesalers. Tell us the nominal width, whole-foot length, buckle and end finish you need, and we will check the specification with you before quoting.
Our catalog covers a 1 in nominal polyester cam-buckle strap family with custom lengths.
Light-duty tensioning, specified as a full assembly
Buyers sourcing a 1 inch cam buckle strap usually need a finished strap with a defined width, whole-foot length, buckle and end finish, not just loose webbing or a bare buckle. Our factory team in Vietnam works from your drawing, photo or sample so the assembly you approve is the assembly we quote.
Choose a 1 inch cam buckle strap configuration
Our catalog supports a 1 in nominal polyester cam-buckle strap family with custom lengths. The family is quoted as a complete assembly, so the details below are confirmed with you in the quotation. Before you send a request, have these items ready: the complete assembly model if you have one, nominal width in inches, overall length in whole feet, the buckle body paired with the webbing thickness, the end finish (hookless looped-back pass-through or stitched end), the overall strap label, and packaging. Details on the parent family are on our custom tie-down straps page.
Catalog family
1 in polyester cam-buckle strap
- Nominal width: 1 in
- Webbing: polyester
- Length: custom, in whole feet (ft)
- Buckle and end finish: specified with your quotation
Black catalog example
Catalog family reference; configuration is specified with your quotation.
Orange catalog example
Catalog family reference; configuration is specified with your quotation.
Your own specification
Send a drawing, photo or sample
Already have a strap you want matched? Share the width, length, buckle, end finish and label details, and attach a drawing or photo if you have one.
Hookless looped-back strap or hardware-ended strap?
The first decision is how the strap ends. A hookless design passes the webbing back through the cam buckle around the load, while a hardware-ended design adds fittings and a stitched termination. Tell us which one your application calls for, and we will review buckle size, webbing thickness and stitching with you before anything is quoted. The structural sketch in the Drawings tab of the Resources section below shows the strap geometry.
What to verify before sample approval
A cam buckle is a component, and the finished strap is the assembly. Before you approve a sample, confirm that the buckle body and webbing thickness are paired as intended, the nominal width and whole-foot length match your drawing, the ends are finished as agreed, and the overall label and packing are correct. Ratings belong to the finished, labeled assembly, so tell us which rating or supporting document you need for your named configuration.
Send your 1 inch cam buckle strap inquiry
Partial information is fine. Add what you know: application, complete strap or buckle only, nominal width in inches, length in whole feet, end finish, quantity and destination.
How an order moves
Requirements and design
You share the application, drawing or photo and the strap details you know.
Preproduction specification review
We confirm width, length, buckle and webbing pairing, end finish, label and packing.
Sample approval
You check the sample against the agreed specification before production begins.
Production
Our factory in Vietnam produces to the approved configuration.
Shipping and payment review
Shipping terms and payment are reviewed with you against your quote.
What to specify for your quotation
Our catalog supports a 1 in nominal polyester cam-buckle strap family with custom lengths, and the photos on this page are family and construction references. Each strap is quoted as its own configuration, so a few details from you let our factory team in Vietnam quote the right assembly.
- Nominal webbing width in inches (in) and overall strap length in whole feet (ft).
- End configuration: hookless looped-back pass-through, or stitched end with fittings.
- Buckle style and the webbing material and thickness you want it paired with.
- Color, label or logo marking, and how you want the straps packed.
- Any rating or supporting document you need, named for the finished strap and your U.S. market. Ratings apply to the finished, labeled assembly, so we do not quote them for a family in general.
Partial information is fine. Send Inquiry and we will work through the rest with you. You can also attach your own drawing or photo.
Finished strap packing and labels
Tell us how you want straps bundled, bagged or carded, and where the overall label should sit. Packaging is agreed in the quotation and confirmed against your approved sample.
Photo: TITAN branded cartons from our factory in Vietnam, shown as a company-level packing example. Carton and pack quantities for your straps are set in your quotation.
Buckles and accessories
If you need components supplied separately, ask for their packing on its own. A loose buckle or length of webbing is a separately quoted companion part, and it is not included automatically with a strap. Packaging is agreed in the quotation.
Photo: black cam-buckle strap catalog example, p. 13 family reference.
Resources
Specification sketch
- W — nominal webbing width, in inches (in).
- L — finished assembly (loop) length, in documented whole feet (ft).
- The schematic shows an endless cam closed loop without end hooks. No end fitting is shown or implied.
- The housing shows a simplified cam body with a pressing tab and the webbing strip. It is not a ratchet and has no handle.
Buyer specification fields
Use these fields to plan a request. Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in).
- Nominal webbing width (in)
- Overall assembly length (whole ft)
- Fixed short-end length (in), if applicable
- End fitting type and interface (in)
- Ratchet/cam style and handle clearance
- Material, color, marking and pack quantity
- Documented finished-assembly WLL (lb) and assembly break strength (lb), separately from raw-webbing strength
Exact dimensions are quote requirements, confirmed with you for your configuration. This sketch explains geometry only and does not confirm additional supply sizes.
We check the assembly drawing, label and sample for the finished strap before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
Attach your own configuration drawing when you request a quote, and the matching production drawing is reviewed with the quotation.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party reference: Elohim 4 in × 30 ft product reference
Competitor values are not DEWIN specifications. No third-party ratings or dimensions are copied into our product specs.
Third-party component drawing
Third-party component drawing: Cam Buckle Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing.
You can send your own drawing with an inquiry.
Real strap sewing — production-process reference only
This video shows strap sewing in our own factory. It is a process reference, not a performance test of an exact SKU, nominal width or rated assembly.
Source: DEWIN catalog p. 13 — catalog family illustration
Catalog p. 13 supports a 1 in nominal polyester cam-buckle strap family with custom lengths. Tell us the width, length, buckle and end finish you need, and we will quote the configuration you select.
Why buyers send the specification first
Our process is built around documents and confirmed details, so a narrow cam buckle strap is reviewed as a complete assembly before it is quoted.
Assembly kept apart from component
We separate the cam buckle from the finished strap so you know which one you are asking about.
Width and length in U.S. units
Requests use nominal inches for width and whole feet for length, confirmed against your drawing.
Images labeled for what they show
Family photos are captioned as family references, and your exact configuration is confirmed in the quotation.
Documents for the named build
Any supporting document is requested for the exact finished strap and market you name.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Frequently asked questions
What is the lead time for 1 inch cam buckle straps?
Lead time depends on the configuration, quantity and current factory schedule. Send your width, length, buckle and end-finish details, and we will confirm timing in the quote.
Can I get a sample after I place an order?
Sample approval comes before production in our workflow. Whether a sample is made first, and on what terms, is confirmed with the actual quote for your configuration.
How long does shipping take?
Shipping time depends on your U.S. destination, shipping method and order size. Include your destination in the inquiry so we can review freight terms with you.
How will I know the status of my order?
Our factory team keeps in touch with you directly during the sample, production and shipping steps. We will confirm how updates are shared when your order is quoted.
Can I request samples of a specific strap?
You can ask. Describe the strap or attach a drawing or photo, and we will review whether a sample can be made and what terms apply. We do not promise free samples.
Related reading
Three buying guides from our factory team help you prepare a strap brief: webbing materials, anchor hardware and a specification worksheet. You can also browse our blog.
Material comparison
Polyester, Nylon and Polypropylene Webbing
Compare the three webbing materials before you choose one for your strap.
Anchor interfaces
Tie-Down Hook and Ring Selection
See how hook and ring types connect a strap to its anchor point.
Purchasing brief
U.S. Tie-Down Strap Specification Worksheet
Work through the details to prepare a purchasing brief for your strap request.