Factory in Vietnam · Dewin Technology Company Limited
2 Inch Cam Buckle Straps
At our factory, we review your 2 in cam buckle strap brief before we quote: complete assembly or loose parts, nominal length in whole feet, buckle and webbing pairing, end fittings and labeling. Send what you have, and our factory team will tell you what else we need.
Cam buckle or ratchet at 2 in width?
A cam buckle strap and a ratchet tie-down strap can share the same nominal 2 in webbing width, yet they are different finished assemblies with different buckles. Before we draft a specification, our factory team confirms which one your application calls for, so your quote starts from the right product.
Select a 2 in cam buckle configuration
Catalog p. 13 shows our 2 in nominal polyester cam-buckle strap family, with custom lengths available. We specify the exact configuration with your quotation. To prepare your inquiry, send the complete assembly or model reference, the nominal width in inches and the length in whole feet. Tell us how the cam buckle pairs with the webbing thickness, plus end fittings, labeling, packaging, quantity and your U.S. destination.
Cam-buckle strap family
2 in nominal polyester webbing family from catalog p. 13, with custom lengths.
Finished cam buckle strap
A complete assembly: cam buckle, 2 in nominal webbing and end fittings, sewn and labeled as one product.
Custom length
Tell us the overall strap length in whole feet and any fixed short end in inches. We confirm the length with your quotation.
Loose buckles and webbing
Need parts instead of a finished strap? Say so in your inquiry and we review the buckle and webbing pairing separately.
Confirm the assembly, not just the buckle
A 2 in cam buckle strap is a finished assembly: buckle body, webbing and end fittings sewn and labeled as one product. If your application needs a tensioning ratchet instead, our ratchet strap page covers that separate assembly. Tell us which finished product you need, and we confirm it before quoting.
Check the pairing before sample approval
Before you approve a sample, we ask you to verify that the buckle body matches the webbing thickness, that the end fittings match your load-securing setup, and that the label wording is correct. Logo, color and packing requests for private label go through our custom tie-down strap page. Bare buckle photos are never used to represent a finished strap.
Send Inquiry
Tell us about your 2 in cam buckle strap requirement. Partial information is fine.
From brief to shipment review
- 1
Requirements and design
You share the application, width, length, fittings and any drawing or photo.
- 2
Preproduction specification review
Our factory team checks the buckle and webbing pairing and confirms the build in writing.
- 3
Sample approval
You review the sample against the agreed specification before production.
- 4
Production
We produce the approved configuration.
- 5
Shipping and payment review
We go over shipping and payment arrangements with you for the confirmed order.
What to specify for your quotation
Our catalog p. 13 shows a 2 in nominal polyester cam-buckle strap family with custom lengths, and the photos on this page are catalog and factory references for that family. Your quotation sets the exact configuration, so the more of these details you send, the faster we can quote:
- Finished assembly or loose parts
- Nominal webbing width in inches and overall length in whole feet
- Buckle and webbing pairing, including webbing material and color
- End fittings and any interface dimensions in inches
- Label, logo and packing requirements
- Any rating or supporting document you need, named for the finished configuration and your U.S. market
Not sure which details apply? Send Inquiry with what you have, and we will work through the rest with you.
Finished strap packing
Tell us how you want finished 2 in cam buckle straps bundled, labeled and cartoned. We confirm the packing format and carton quantity for your configuration with your quote.
Loose buckles and accessories
If you need buckles, webbing or fittings without a finished strap, say so in your inquiry. A loose companion part is reviewed separately from the finished strap and is not automatically included with it. Packing for loose parts is confirmed with the quote.
Resources for 2 in cam buckle straps




Specification sketch
- W — nominal webbing width (in)
- L — overall assembly length (whole ft)
- C — cam housing; T — pressing tab
Buyer specification fields
- Nominal webbing width (in)
- Overall assembly length (whole ft)
- Fixed short-end length (in), if applicable
- End fitting type and interface (in)
- Ratchet/cam style and handle clearance
- Material, color, marking and pack quantity
- Documented finished-assembly WLL (lb) and assembly break strength (lb), separately from raw-webbing strength
Lengths of finished long straps and rolls use whole ft; local component and short-end dimensions use in. Exact dimensions are quotation requirements that you send with your inquiry.
We check the assembly drawing, label and sample for the finished strap before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
The generic schematic provided here explains the geometry only. If you have your own configuration drawing, attach it to your inquiry when you request a quote.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party reference: Elohim 4 in × 30 ft product reference
Competitor values are not DEWIN specifications. No third-party ratings or dimensions are copied into our product specifications.
Third-party component drawing: Cam Buckle Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing.
Real strap sewing. This clip is a production-process reference for the strap and webbing family only. It is not a demonstration of an exact 2 in cam buckle strap or SKU, and it makes no claim about rating or test results.
Catalog p. 13 shows our 2 in nominal polyester cam-buckle strap family with custom lengths. The three color photos illustrate the family; your exact configuration is specified with your quotation.
Tell us the width, length and end fittings you need, and our factory team will quote the matching configuration.
Why send your brief to our factory
Our process is built around clear documents and a direct line to the people who make the strap. These are the four things you can expect from the inquiry stage.
Specification review first
Our factory team checks your width, length, fittings and label details before quoting.
Assembly or parts, stated clearly
We keep finished straps and loose buckles separate in every reply, so nothing is mismatched.
Photos tied to models
We match each image or drawing to its configuration before it goes into a quote.
Documents requested up front
If you need rating or testing paperwork, tell us the exact configuration and we say what is available.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
2 in cam buckle strap FAQ
What is the lead time for 2 in cam buckle straps?
Lead time depends on the configuration, quantity, fittings and packing. Send your nominal length in feet, end fittings and quantity, and we confirm timing with your actual quote.
Can I get a sample after I place an order?
Sample approval is a step before production in our workflow. Whether a sample is made first, and on what terms, is confirmed in the quote for your configuration.
How long does shipping to the United States take?
Shipping time depends on the order, destination and freight arrangement. Tell us your delivery location in the inquiry, and our factory team reviews shipping options with you as part of the quote.
How will I know the status of my order?
Your factory contact updates you at the stages agreed in your quote. Include the best way to reach you with your inquiry, and we confirm how updates are delivered.
Can I request samples of a cam buckle strap?
You can ask for one in your inquiry. Whether samples are offered, and under what terms, depends on the configuration and is stated in the quote. We do not promise free samples.
Guides for specifying cam buckle straps
Three guides from our factory team cover webbing materials, hook and ring selection, and a U.S. specification worksheet for your purchasing brief. You can also visit our blog, see ratchet straps, or contact our factory team.

Material comparison
Polyester, Nylon and Polypropylene Webbing
How the three webbing materials compare, so you can choose the right one for your strap.

Anchor interfaces
Tie-Down Hook and Ring Selection
How hook and ring types connect to your anchor points, and what to confirm before you specify one.

Purchasing brief
U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare your purchasing brief: width, length, fittings, quantity and destination.