DEWIN
Catalog illustration of the 2 in nominal ratchet strap family Catalog family reference; configuration is specified with your quotation

2 Inch Ratchet Straps

We review your 2 in ratchet tie-down strap specification before quoting. Dewin Technology Company Limited supplies U.S. distributors, private-label buyers and hardware wholesalers, and you send your brief straight to our factory team.

One finished assembly, one clear quote

Choosing a 2 in ratchet strap is more than picking a width. We ask U.S. buyers to settle the whole-foot length, the fixed short end and movable long end, the end fittings and the label requirement together, so the quote describes a finished strap and not just a loose ratchet buckle.

Select a 2 in ratchet strap configuration

Before you compare references, check these points on your own requirement:

  • • Nominal width: 2 in
  • • Overall length in whole feet (ft)
  • • Fixed short end and movable long end
  • • End fittings, such as hooks
  • • Any rating or document requirement for the finished assembly
  • • Label content and carton packing

Each reference below is a starting point for your inquiry. Codes and pack counts come from our catalog and purchase request form, and the 2 in nominal family is shown in our English catalog. Length, end fittings and labels are specified with your quotation, and current availability is confirmed when we review your details.

RJ5003003

Catalog reference · nominal width 2 in

Catalog pack count: 20 sets per carton

Send Inquiry

RJ5003005

Catalog reference · nominal width 2 in

Catalog pack count: 18 sets per carton

Send Inquiry

RJ5003006

Catalog reference · nominal width 2 in

Catalog pack count: 18 sets per carton

Send Inquiry

RJ5003008

Catalog reference · nominal width 2 in

Catalog pack count: 14 sets per carton

Send Inquiry

RJ5003010

Catalog reference · nominal width 2 in

Catalog pack count: 12 sets per carton

Send Inquiry

RJ5003012

Catalog reference · nominal width 2 in

Catalog pack count: 12 sets per carton

Send Inquiry

RJ5005003

Catalog reference · nominal width 2 in

Catalog pack count: 16 sets per carton

Send Inquiry

Quotation illustration of a yellow polyester 2 in x 30 ft ratchet strap with a steel ratchet buckle and steel hooks

2 in x 30 ft quoted configuration

Yellow polyester webbing, steel ratchet buckle, steel hooks, custom logo. 10 pieces per carton.

Quotation configuration illustration. This is a separate quotation reference, independent of the RJ catalog references. Availability is confirmed at inquiry.

Send Inquiry

Looking for the wider range? Go back to all ratchet straps.

Length and end configuration come first

On a 2 in ratchet strap, the overall length in whole feet is split between a fixed short end that carries the ratchet buckle and a movable long end that is threaded through it. Tell us the total length, the end fittings you need on each end, and how the strap will be used. Our factory team then checks that the configuration is a finished assembly we can describe in a quote. The structural sketch in the Drawings tab below shows where each dimension sits.

Real strap samples from our factory in Vietnam, models not identified
Real strap samples from our factory in Vietnam; models not identified. Your exact configuration is specified with your quotation.
Strap sewing at our Vietnam factory, a production-process photo
Strap sewing at our Vietnam factory. This is a production-process photo, not a dimension drawing, a model match or a rating document.

What to verify before sample approval

Before you approve a sample, check the nominal width, the overall length in feet, the fitting on each end and the label wording against your written specification. If you need a rating on the label, ask us which complete-assembly documentation supports it. You can attach your own configuration drawing when you request a quote, and we review it against the sample.

Send your 2 in ratchet strap brief

Partial details are fine. Include what you know about application, length, end fittings, quantity and destination, or a catalog reference. You can also use our contact page.

Helpful details: application, width, length in ft, end fittings, quantity, destination, any rating or document request.

Optional drawing or product photo. Maximum file size: 100 MB.

How an order moves

  1. 1

    Requirements and design

    You share the brief, drawings or photos.

  2. 2

    Preproduction specification review

    Our factory team checks width, length, fittings and labels.

  3. 3

    Sample approval

    You confirm the sample against the written specification.

  4. 4

    Production

    We build the approved configuration.

  5. 5

    Shipping and payment review

    Shipping method and payment terms are confirmed with your quote.

What to specify for your quotation

A ratchet buckle is a metal component, while a ratchet tie-down strap is the complete assembly of webbing, buckle and end fittings. To quote the assembly you need, please tell us the overall length in whole feet, the fixed short-end length in inches, the end fitting on each end, the webbing material and color, the marking or label wording, and the quantity and destination.

If you need a working load limit, a break-strength figure or a supporting document, tell us which one and for what market. Any rating must be documented for the complete named assembly, so we confirm with you what applies to your configuration. Cargo restraint and overhead lifting are separate applications, so please state how the strap will be used. You can start from one of the catalog references above, or from the 2 in x 30 ft quoted configuration, and we adjust the specification with you. Send Inquiry with whatever you already know.

Packaging for 2 in straps

TITAN branded cartons packed at our Vietnam factory, shown as a company-level packing example

Branded cartons and private-label packing

Tell us if you want your brand, a printed insert, a polybag or a specific unit count per carton. Packaging is agreed in the quotation for your strap configuration.

Photo: real TITAN branded cartons from our factory. It is a company-level packing example, not proof of an exact model, quantity or carton layout.

Catalog image of a double J hook, a loose end-fitting part

Related components and accessories

Our hardware catalog includes loose end fittings such as the double J hook shown. It is a companion part that we review separately and is not automatically included with a strap. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities and compatibility are confirmed in the quotation.

Photo: catalog illustration of a loose part. It does not establish compatibility with, or a rating for, a specific 2 in strap.

2 in ratchet strap resources

Why send your 2 in strap brief to our factory team

Our process is built around a clear specification and the documents that support it.

Direct factory contact

Your brief goes to the team that coordinates the order.

Specification first

We review width, length, fittings and labels before we quote a configuration.

Clear reference mapping

We keep catalog codes, quoted builds and photos separate, so each quote describes one defined configuration.

Documents on request

Tell us which rating or supporting document you need, and we confirm what covers your assembly.

Customer brands

These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. If you want to discuss a private-label 2 in ratchet strap for your own brand, Send Inquiry.

POLARIS branded strap made by DEWIN, catalog image
POLARIS
MULTIPRENS USA printed webbing made by DEWIN, catalog image
MULTIPRENS USA
FLOYD printed webbing made by DEWIN, catalog image
FLOYD
TITAN printed webbing made by DEWIN, catalog image
TITAN
LocknLock wrist loop made by DEWIN, catalog image
LocknLock

2 in ratchet strap FAQ

What is the lead time for 2 in ratchet straps?

Lead time depends on the length, end fittings, logo, packaging and quantity. Send those details and we confirm timing with the actual quote.

Can I get a sample after I place an order?

Sample approval is a step before production in our order workflow. Whether a sample comes before or after an order, and on what terms, is confirmed in your quote.

How long does shipping to the U.S. take?

Shipping time depends on the method, the destination and the carton count. Share your destination and quantity, and we confirm shipping terms with the quote.

How do I check my order status?

Status updates are handled directly with our factory team through the contact details you give us. Please include your order details when you ask.

How do I request a sample of a 2 in ratchet strap?

Send an inquiry with the width, length in feet, end fittings, logo needs and quantity you have in mind. We tell you whether a sample of that configuration is possible and on what terms.

Related articles

Send Inquiry

Three guides from our factory team to help you prepare a 2 in strap brief. You can also visit the blog.