3 Inch Polyester Webbing
We review 3 in polyester webbing inquiries by material, nominal width, weave, thickness, and roll or cut length before we quote. This is raw webbing for U.S. distributors, private-label buyers and sourcing teams, separate from a finished strap assembly.
Material First, Strap Second
A roll of 3 in polyester webbing is a material decision before it is a product decision. Because we are the factory in Vietnam, we can review width tolerance, weave, thickness, color and roll or cut length together, then confirm what can be quoted for your U.S. program, whether you convert the webbing yourself or plan a finished strap later.
Select a Webbing Configuration
The DW Straps catalog supports a nominal 3 in polyester webbing family, and page 6 of the purchase request form lists orange polyester webbing references. Codes are references only, and we do not read a roll length from a code. Tell us the width tolerance, weave and thickness, the roll length in whole feet or a cut-piece length, color or printed marking, and the purchase unit. We check these fields against the drawing or sample you send, then confirm which configurations can be quoted.
3 in Polyester Webbing Family
Nominal 3 in width family from the DW Straps catalog. Raw webbing in roll or cut-piece form, without buckles, hooks or sewn loops.
Orange Polyester References
Orange polyester webbing references are listed on page 6 of the purchase request form. Quote the reference you have and we match it to the catalog family.
Color and Print
The catalog shows loose webbing in several colors. Name the color, any printed marking and the print method you expect, and we confirm them in your quotation.
Raw Webbing or a Finished Strap?
Raw 3 in polyester webbing is material in roll or cut-length form, without buckles, hooks or sewn loops. If your program needs end fittings, a rated assembly or load labeling, that is a separate finished-strap request. Tell our factory team which one you are buying, because it changes the specification we review and the evidence we can match to your quote.
Length, Color and Print Before Sample Approval
Specify the roll or cut length in whole feet, the color and any printed marking, then compare the sample against that sheet before you approve it. Check measured width against the stated tolerance, plus thickness and weave. Printing on webbing is not automatically heat transfer or jacquard, so name the method you expect. Material grade and strength are confirmed in your quotation for the named webbing, not assumed from a photo.
Need your own logo or marking on finished lengths? See our custom tie-down straps page.
Send Inquiry
Partial information is fine. Name, email and phone are required so our factory team can reply.
How Your Webbing Inquiry Moves
Five steps, each one confirmed with our factory team before the next begins.
Requirements and Design
You send the webbing brief, drawing or sample photo.
Preproduction Specification Review
We check the fields against your brief and list what is open.
Sample Approval
You compare the sample with the agreed specification.
Production
Production proceeds against the approved specification.
Shipping and Payment Review
We review shipping and payment terms with you for your U.S. destination.
What to Specify for Your Quotation
Information about 3 in polyester webbing describes the webbing only. It does not carry over to a finished strap, because sewing, hardware and the complete assembly must be documented together. To quote the webbing you need, tell us the nominal width and tolerance, thickness and weave, the roll length in whole feet or the cut-piece length, color or printed marking, the purchase unit, quantity and U.S. destination. If you need a material grade, strength, UV, abrasion or flame-resistance document, name it and the intended market, and we confirm what can be provided for the named webbing in your quotation. You can also attach your own drawing or sample photo. For a finished assembly, see our ratchet straps page; to start a webbing review, Send Inquiry.
Packaging and Accessories
Roll and Cut-Piece Packing
Tell us whether you need full rolls or cut pieces, the length in whole feet, and the purchase unit you prefer. Packaging and quantities are agreed in the quotation for your order. The roll shown is a catalog reference, not a packed-carton example.
Related Components and Accessories
The catalog shows loose webbing in several colors, and the black roll above is a catalog reference, not an exact product. A companion part, such as a separately sourced component, is reviewed on its own and is not automatically included with the webbing. Tell our factory team in Vietnam which related parts your U.S. order requires, and we confirm quantities and compatibility for the quoted configuration.
Webbing Resources





Specification sketch
- W — nominal width, in inches (in).
- T — thickness, in inches (in), shown on the separate end cross section.
- L — supplied length, in whole feet (ft). No roll length is inferred from a model code.
- The diagonal hatch is a symbolic weave pattern only. It does not show an actual weave construction.
Buyer specification fields
- Material/polymer grade and weave
- Nominal width and thickness (in)
- Supply/cut length (whole ft)
- Color, print/marking or edge finish
- Raw-webbing break evidence, separate from assembly WLL
- Pack or roll requirements
Lengths of finished long straps and rolls use documented whole ft. Local component and short-end dimensions use in. Exact dimensions are specification fields you give us in the inquiry, and this sketch does not set any supply size.
We check the webbing roll label and width against the drawing before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This schematic explains the geometry. It is not an exact-SKU signed drawing, so attach your own configuration drawing when you request a quote.
References
Third-party reference: US Cargo Control specification reference
Competitor values are not DEWIN specifications. No third-party ratings or dimensions are copied into our product specifications.
An original generic schematic is provided here. The matched production drawing is reviewed with the quotation.
You can send your own drawing with the inquiry form.
Strap sewing. This is a production-process reference for the strap and webbing family, not a demonstration of an exact SKU, width or rating. Ask our factory team if you need a specific view of the webbing roll, width measurement or cut ends.

The DW Straps catalog supports a nominal 3 in polyester webbing family, and the purchase request form lists orange polyester webbing references. Send the webbing fields you need for your configuration and our factory team will confirm which catalog references apply.
Why Send Your Webbing Brief to Our Factory
A clear brief gets a clear review. This is how our factory team in Vietnam handles a polyester webbing inquiry.
One Factory Contact
Your inquiry goes straight to our factory team, so questions about the webbing are answered by the people who review the specification.
Specification Before Quote
We check width, tolerance, weave, thickness, length and color against your brief before we describe what can be quoted.
Drawings and Photos Welcome
Attach a drawing or sample photo. A partial brief is fine, and we help you complete the specification.
Documents Matched to the Quote
Material or test documents are discussed only for the named webbing and market, and are confirmed in the quote.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. To discuss a private-label webbing program, Send Inquiry.
3 Inch Polyester Webbing FAQ
What is the lead time for 3 inch polyester webbing?
Lead time depends on the specification, quantity, color or print, and sample approval. We confirm timing in your quote. Send the width, thickness or weave, length in feet, quantity and destination so we can answer.
Can I get a sample after I place an order?
Tell us in your inquiry whether you need a sample before or after an order. We confirm the sample step, terms and approval point in the quote, before production begins.
How long does shipping take?
Shipping time depends on your U.S. destination, shipping method, packing and freight terms. We confirm these with the quote for the actual order.
How can I check my order status?
Order updates come through the factory team contact on your quote. Ask for the update points you need, such as sample approval, production and shipping review, and we will agree them with you.
Can I request samples of the webbing?
Yes, you can ask for a sample of a webbing configuration. Describe the width, weave, thickness, color or print and length. Availability, cost and terms are confirmed in the quote; free samples are not promised.
Related Webbing Articles
Three buyer guides for U.S. sourcing teams. Visit the blog for more posts.

Polyester, Nylon and Polypropylene Webbing
A material comparison to help you decide which webbing fiber fits your program.

Tie-Down Hook and Ring Selection
An overview of anchor interfaces and how hook and ring types differ.

U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing a purchasing brief before you request a quote.
Dewin Technology Company Limited. Questions about a finished assembly? Contact our factory team.