Aluminum Snap Hooks
We review aluminum-body snap hook requests for U.S. distributors, private-label buyers and wholesale sourcing teams. Send us the hook style, gate construction and a drawing or photo, and we will confirm the matching configuration with you before quoting.
Sourcing an aluminum-body hook starts with the gate
The first question on an aluminum snap hook is which part is aluminum and which is not. Page 3 of our hook catalog labels this family an aluminum spring hook with an aluminum alloy body and a steel gate, so it is not an all-aluminum hook. Once body, gate and spring are stated separately, we can match the drawing to your request. This page covers hardware components only, not climbing or overhead lifting equipment.
Choose a snap hook configuration
Before we match a snap hook to your application, we look at eight details: slot or eyelet style, hook opening, wire diameter or plate thickness, connection direction, gate and weld-joint construction, body and gate material with surface finish, and a model drawing. We review these fields against the source catalog, where the aluminum snap hook family is shown with an aluminum alloy body and a steel gate. Send what you have, and we will confirm the rest with you in the quotation.
Aluminum spring hook family
DEWIN hook catalog, p. 3
Aluminum alloy body with a steel gate. The catalog image on this page shows the family. The exact hook configuration, dimensions and finish are specified with your quotation.
Fields to include in your brief
- Slot or eyelet style and connection direction
- Hook opening and wire diameter or plate thickness (in)
- Gate and weld-joint construction
- Body and gate material, surface finish
- Your drawing or photo of the hook you want matched
Body material and gate material are two decisions
Page 3 of our hook catalog labels this family an aluminum spring hook and states an aluminum alloy body with a steel gate. When you inquire, tell us whether you need the body, the gate and the spring described separately, along with any alloy grade or surface finish you require, and we will check that wording against the drawing before we put anything in a quote.
Confirm the hook shape before sample approval
Slot, hook opening, wire diameter or plate thickness, connection direction and weld joint decide whether a snap hook fits your assembly. Before you approve a sample, we ask that each of these fields is matched to a drawing and photo of the same model. Our specification sketch shows which dimensions to send. If you need the hook on a custom assembly, see our custom tie-down straps.
Send your snap hook brief
Partial information is welcome. Tell us the application, whether you need a hook component or a finished assembly, and the quantity and destination if you know them.
How an inquiry moves through our factory
Timing, cost and test scope are confirmed in your quote, not fixed here.
- 1
Requirements and design
You share the hook style, application, drawing or photo.
- 2
Preproduction specification review
We check body, gate, spring and dimension fields against the drawing.
- 3
Sample approval
You approve the confirmed sample details before production is released.
- 4
Production
Our factory in Vietnam builds to the approved specification.
- 5
Shipping and payment review
Freight terms and payment details are reviewed with you before shipment.
What to specify for your quotation
Page 3 of our hook catalog labels an aluminum spring hook and states an aluminum alloy body with a steel gate. For your quotation, please tell us: the alloy grade or finish you require, the overall length, hook opening and eye width in inches (in), the wire diameter or plate thickness, the spring material, and any load marking, test scope or supporting document you need. A snap hook is a component and a finished strap or sling is an assembly, so say which one you are buying. Dimensions, materials and documents are confirmed for the quoted configuration. If you are comparing against a finished assembly, see our ratchet straps, or Send Inquiry with your drawing.
Component packing
Tell us whether you want bagged, boxed or cartoned pieces and how you count them. Packaging and piece counts are agreed in the quotation for your configuration, so please include your preferred packing and any labeling needs in your brief.
Related components and accessories
Shown: a webbing roll reference image. Webbing is a companion item we review separately with your snap hook request. It is not automatically included. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities and compatibility are confirmed for the quoted configuration.
Snap hook resources
Specification sketch
- L (in)
- Overall body length of the hook.
- G (in)
- Gate opening, the clearance when the gate is pushed open.
- W (in)
- Width of the closed attachment eye.
- Materials
- Body: aluminum alloy. Gate: steel. Per our hook catalog, p. 3. No alloy grade or rating is stated.
Buyer specification fields
Send as many of these as you have. Partial information is welcome.
- Webbing interface or eye width (in)
- Overall length (in)
- Opening/gate clearance (in)
- Body or wire thickness (in)
- Material grade, finish or coating chemistry
- Component-specific load marking/test scope
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). This sketch explains the geometry only and does not confirm additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
You can attach your own configuration drawing when you request a quote. This schematic is a generic explanation of the hook geometry, not a signed drawing of a specific model.
Third-party reference
Third-party reference: US Cargo Control specification reference
Competitor values are not DEWIN specifications. No ratings or exact competitor dimensions are copied into our product specs.
We review the matched production drawing with the quotation.
Factory process video
Our factory in Vietnam works with webbing looms and yarn racks, strap sewing and assembly, and a tensile-test machine. Process footage shows how we work. It is not a performance test of a specific hook, and equipment footage does not establish a rated load, certification or test result. Ask us for the process video when you send your brief, and we will confirm any testing you need for your configuration in the quotation.
Why send your snap hook brief to our factory
We keep the process a clear document trail, so every detail in your quote can be traced back to your brief.
Specification fields first
We ask for slot, hook opening, wire or plate and direction up front, so the quote starts from a defined hook.
Body and gate stated separately
Body, gate and spring materials are recorded as separate fields instead of one blanket material claim.
Photo and drawing matched
We pair each photo with the drawing of the same model before it is shown to you as a reference.
A direct route to the factory team
Your brief goes to our factory team in Vietnam, and any detail we need from you is named in the reply.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Snap hook questions
What is the lead time for aluminum snap hooks?
Lead time depends on the hook configuration, material and quantity. Send your specification and target quantity, and we confirm timing in the actual quote rather than quoting a fixed number here.
Can I get a sample after the order is placed?
Sample steps depend on the configuration. Tell us what you need to approve, and we confirm whether a sample comes before or alongside production in your quote.
How long does shipping take to the United States?
Shipping time depends on the order size, packing and freight method. Give us your destination, and we review freight terms with you when we confirm the order details.
How will I know the status of my order?
Our factory team updates you directly by reply on the inquiry thread. We do not offer an online order portal for this product family.
How do I request a snap hook sample?
Send a drawing or photo, the hook style, and the body and gate materials you expect. Sample availability and any terms are confirmed in the quote, and we do not promise free samples.
Snap hook buying notes
Three guides from our factory team help you prepare a purchasing brief: material comparison, anchor interfaces and a U.S. specification worksheet.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose webbing before you write your brief.
November 15, 2026 · Read the guide
Tie-Down Hook and Ring Selection
How to describe the anchor interface your hook or ring must connect to.
November 15, 2026 · Read the guide
U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare your purchasing brief before you contact our factory.
November 15, 2026 · Read the guide