Home Plastic Cam Buckles
Plastic Cam Buckles From Our Vietnam Factory
Send the webbing you plan to use, the slot and thickness you need, the clamping interface and any drawing or photo, and our factory team will review the buckle with you before quoting.
Source the Buckle, Not Just the Strap
A plastic cam buckle is one part of a cam strap, so the first sourcing question is what webbing it must accept and how it must clamp, not how long a finished strap will be. Dewin Technology Company Limited reviews your slot, thickness, materials and part documents with you before a quote is built.
Select a Plastic Cam Buckle
Before choosing a plastic cam buckle, confirm the nominal webbing width in inches the body must accept, the slot opening and webbing thickness, how the clamping interface grips the webbing, the body and lever material, any surface finish, and which part-level documents cover the component. Also tell us the purchasing unit. We review those details against a drawing and photo before quoting.
Nominal 1 in plastic cam buckle
Listed on catalog p. 17 as a nominal 1 in plastic cam buckle
Slot and thickness, material and finish, pack quantity and any documents you need are set out in your quotation. The catalog illustration shown on this page is a family reference.

Match the Webbing Slot First
The nominal width in inches names the webbing the buckle is meant to accept; it is not an outer-body dimension. Slot opening and webbing thickness decide whether the webbing threads and grips as intended, so send both, and a short length of your webbing if you have it.
The structural schematic in the Buckle Resources section shows which dimensions to give us.


Check the Clamp Before Sample Approval
Tell us how the lever or gripping surface should hold the webbing, what the body and lever are made of, and any surface finish you need. At sample stage, compare the part to the drawing, note which webbing you tested with, and ask which part-level documents apply. Component documents are not a finished-strap rating.
Looking for a finished strap instead? See ratchet straps or custom tie-down straps.
Send Your Cam Buckle Brief
Partial information is fine. Name, Email and Phone are required; the rest helps us review the buckle sooner.
How an Inquiry Moves
- 1
Requirements and design
You share the webbing, slot, thickness and any drawing or photo.
- 2
Preproduction specification review
We check the buckle details and list anything still open.
- 3
Sample approval
You review a sample against the agreed specification.
- 4
Production
Production follows the approved specification and quote terms.
- 5
Shipping and payment review
Shipping and payment terms are reviewed together before release.
Inquiries are reviewed by the factory team at Dewin Technology Company Limited. You can also use the contact page.
What to Specify for Your Quotation
Page 17 of our catalog lists a nominal 1 in plastic cam buckle. To quote the buckle you need, tell us the part code if you have one, the nominal webbing width in inches, the slot opening and webbing thickness, the cam or lever interface, the body and lever material or resin grade you require, and any surface finish. Add the documents you need for the component, the purchasing unit and your U.S. destination. If you have a drawing of your own configuration, attach it to the inquiry. We confirm material, documents and any rating against your brief and the quoted configuration. Send Inquiry with whatever you have, and our factory team will ask for the rest.
Packaging and Accessories
Component Packaging
Tell us how buckles should be counted and packed, such as loose in cartons, bagged by quantity or sorted by model. Packaging is agreed in the quotation for your buckle and is not assumed from the packing of any strap.

Matching Accessories
A cam buckle works together with webbing, and a finished cam strap may add a sewn loop or end fitting. Any companion part is reviewed separately against your brief and is not automatically included with the buckle. Say in your inquiry which webbing or parts you want us to review alongside it.
Buckle Resources


Specification sketch
- A:
- top outline
- B:
- side outline
- W (in):
- webbing slot width
- L (in):
- body length
- H (in):
- slot opening height
Loose plastic component with a rectangular webbing slot and a hinged cam or press plate; no ratchet spool. Shape reference only. No resin grade is assigned.
Component Drawings
Use these fields to plan a plastic cam buckle brief:
- Nominal webbing/slot width (in)
- Body length, thickness and clearance (in)
- Cam/lever interface
- Material or resin grade and finish
- Component-specific rating/test evidence and pack quantity
Lengths of finished long straps and rolls use documented whole feet (ft); local component and short-end dimensions use inches (in). This sketch explains the geometry only and does not confirm additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
You can attach your own configuration drawing when you request a quote, and we review it with the quotation.
Third-party reference
US Cargo Control specification reference
Competitor values are not DEWIN specifications.
Third-party component drawing
Format reference for the referenced third-party item only; not a DEWIN production drawing.
Factory Process Video
Our own Vietnam factory shows webbing looms, strap sewing and assembly, and a tensile-test machine in process footage. Ask our factory team for the clips that fit your project.
Process Footage, Not a Buckle Test
Process footage shows factory operations. It is not a performance test of a specific plastic cam buckle, and it does not state a rating for a component or a finished strap.

Catalog
Catalog p. 17 lists a nominal 1 in plastic cam buckle. The illustration shows the family; your configuration, material and documents are specified in the quotation.
Why Buyers Start With a Brief
A clear component brief keeps questions, drawings and documents attached to the right buckle from the first message.
Component-first questions
We ask about the webbing slot, thickness and clamp before anything about finished-strap length or ends.
Drawing and photo matching
Images and drawings are linked to one model before they are used in a quote or sample review.
Documents stay with the part
Any material or test document is requested by name and kept clear of finished-strap claims.
Direct route to the factory
Your brief goes to the DEWIN factory team, not through a generic sales queue.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. If you want to start a private-label buckle project, Send Inquiry.





Plastic Cam Buckle FAQ
What is the lead time for plastic cam buckles?
Lead time depends on the buckle specification, quantity and whether a sample is needed first. Send your webbing slot, thickness, material and purchasing unit, and we confirm timing in the actual quote.
Can I request a sample after an order is placed?
Sample steps are agreed per project. Tell us whether you want approval before production, and we state the sample terms in the quote rather than assuming them.
How long does shipping take to the United States?
Shipping time depends on quantity, packing, destination and the freight option chosen. Include your U.S. destination in the inquiry, and the quote will set out shipping terms.
How will I know the status of my order?
Order updates come from our factory team through the contact details you give us. We do not offer an online order portal; ask in the quote how you would like updates handled.
How do I ask for a buckle sample?
Send the nominal webbing width in inches, slot and thickness, clamping interface, materials and any drawing or photo. We review them and confirm whether a sample is possible and on what terms; samples are not promised free.
Related Articles
Three guides from our factory team. For more, visit the blog.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose webbing before you specify a buckle or strap.
Tie-Down Hook and Ring Selection
A guide to anchor interfaces: how hook and ring types connect to the points on your equipment.
U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing your purchasing brief before you contact our factory team.