1.5 Inch Cam Buckle Straps
We help U.S. distributors, private-label buyers and wholesale sourcing teams specify hand-tightened cam buckle strap assemblies. Tell us the nominal width, whole-foot length, buckle and webbing pairing, end fittings and quantity, and we will review what can be quoted.
The DEWIN catalog (p. 13) supports a 1.5 in nominal polyester cam-buckle strap family with custom lengths
Buckle and Webbing Are Chosen as a Pair
A cam buckle strap is a finished assembly, so the buckle body, webbing width and thickness, and end fittings must suit one another. We start every 1.5 in cam strap inquiry by confirming that pairing and the whole-foot length, so the quote is built on a defined configuration rather than a category name.
Select a Cam Strap Configuration
The DEWIN catalog (p. 13) supports a 1.5 in nominal polyester cam-buckle strap family with custom lengths. The photos below show the family as catalog references. Your exact configuration, including buckle and webbing pairing, whole-foot length, end fittings, label wording and packing, is specified with your quotation.

Cam Strap Family
Catalog family reference, p. 13. Polyester cam-buckle straps with custom lengths. Width: 1.5 in nominal family.

Black Strap Example
Catalog example of a black cam-buckle strap. Shown as a family reference; length and fittings are specified with your quotation.

Orange Strap Example
Catalog example of an orange cam-buckle strap. Shown as a family reference; color and logo requests are reviewed with your quotation.
What to Include in Your Request
- Nominal width (in)
- Overall length (whole ft)
- Buckle body and webbing pairing
- End fittings
- Label wording and packing
- Quantity and U.S. destination
Match the Buckle to the Webbing
The buckle must grip the webbing it is sewn to. Webbing thickness, weave and buckle cam design all affect how well the strap holds and releases, so we ask for them together. Send the nominal width in inches, the whole-foot length and any buckle style you already use, and our factory team will review the pairing before discussing a quote.
The structural sketch in the Drawings tab under Cam Strap Resources explains the width and length geometry. You can also attach your own configuration drawing when you request a quote.


Check Fittings and Labels Before Sample Approval
Before you approve a sample, compare the end fittings, stitching, overall length in feet and label wording with your written specification. Any load-rating wording belongs to the complete strap, so tell us if you need it on the label and which documentation you expect for the finished assembly.
Need a different assembly type? See ratchet straps. For logo, color and packing requests, see custom tie-down straps.
Send Your Cam Strap Brief
Partial information is fine. Include the application, whether you need a finished assembly or a component, width, length, end fitting, quantity and destination.
How an Order Moves Forward
Requirements and design
You share the application, size, fittings, quantity and any drawing or photo.
Preproduction specification review
Our factory team checks the buckle and webbing pairing, length and labels with you.
Sample approval
You compare the sample with the written specification before moving on.
Production
The approved configuration is produced against the confirmed specification.
Shipping and payment review
Freight terms, documents and payment terms are reviewed with you for the order.
What to Specify for Your Quotation
The DEWIN catalog (p. 13) supports a 1.5 in nominal polyester cam-buckle strap family with custom lengths, and the photos on this page show that family and how a cam-buckle loop is built. To turn the family into a quotable strap, tell us the overall length in whole feet, the buckle and webbing pairing, the end fittings, any material or color requirement, label wording and the documents you expect. If you need load-rating wording, name the requirement so we can review it against the finished assembly. A bare buckle photo does not describe the finished strap it may be sewn into, so a drawing or photo of your target strap helps. To start, Send Inquiry with your specification.
Packaging and Accessories

Finished Strap Packing
Tell us how finished cam straps should be bundled, labeled and cartoned. Packaging is agreed in the quotation for each configuration.
Photo: TITAN branded cartons from our factory in Vietnam, shown as a company-level packing example.

Loose Buckles and Accessories
Loose buckles or fittings are a separate component request with their own packing. Strap packing details do not carry over to them. Any companion part is reviewed separately and is not automatically included with a strap.
Photo: black cam-buckle strap catalog example (p. 13), shown as a family reference.
Cam Strap Resources




Specification sketch
- W
- Nominal webbing width, in inches (in).
- L
- Overall assembly length, in whole feet (ft).
- ▮
- The dashed end shape marks the end fitting. Its geometry is to be specified. The sketch shows a cam housing with a pressing tab and a webbing strip only, with no ratchet teeth and no ratchet handle.
Buyer specification fields
- Nominal webbing width (in)
- Overall assembly length (whole ft)
- Fixed short-end length (in), if applicable
- End fitting type and interface (in)
- Ratchet/cam style and handle clearance
- Material, color, marking and pack quantity
- Documented finished-assembly WLL (lb) and assembly break strength (lb), separately from raw-webbing strength
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). Exact dimensions are quotation requirements, so send yours and we review them with you.
We check the assembly drawing, label and sample for the finished strap before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This schematic explains the geometry. When you request a quote, you can attach your own configuration drawing, and we review it with your quotation.
Third-party references
- Third-party referenceUS Cargo Control specification reference
- Third-party referenceElohim 4 in × 30 ft product reference
Competitor values are not DEWIN specifications. No third-party ratings or dimensions are copied into our product specifications.
Third-party component drawing
Third-party referenceCam Buckle Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing.
Videos
Real strap sewing. This is a production-process reference for the strap and webbing family, not a performance test of a specific configuration.
Catalog
Tell us which configuration you want to review, and our factory team will match it to the relevant catalog family and reference details in your quotation.
Why Send Your Brief to Our Factory Team
Our process is a document workflow: your specification comes in, we review it against what we can make, and the terms are confirmed in your quote.
Specification First
We read the width, length, buckle and fitting details you list before any quote is discussed.
Drawings and Photos Welcome
Attach a drawing or product photo of the strap you need, and we use it as the reference for the review.
Photos Matched to Models
Each image or drawing is kept with the configuration it shows, so a buckle photo is never read as a finished strap.
Terms in the Quote
Minimum order, packing, freight terms, origin documents and timing are confirmed with the actual quote for your build.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.





Frequently Asked Questions
What is the lead time for cam buckle straps?
Lead time depends on the configuration, quantity, sample status and whether custom logos or labels are needed. Send your width, length, buckle and fitting details with your quantity, and we confirm timing with the actual quote.
Can I get a sample after placing an order?
Share your specification and order details, and our factory team will tell you how sample approval fits your order. Sample arrangements, cost and approval steps are confirmed in the quote for your configuration.
How long does shipping take?
Shipping time depends on your U.S. destination, the freight method and the carton and pallet plan for your order. Include your destination in your inquiry, and shipping terms and timing are confirmed with the quote.
How do I check the status of my order?
After an order is confirmed, contact our factory team through the same channel you used for your quote, and quote your order details. This page does not offer an online tracking portal.
Can I request a sample before ordering?
Name the configuration you want to evaluate: nominal width in inches, length in feet, buckle and webbing pairing and end fittings. Whether a sample is available, and on what terms and cost, is confirmed with the quote. Free samples are not promised.
Related Articles
Three guides for buyers specifying cam straps and related tie-down hardware. Browse the full blog for more.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose webbing before you specify a strap.
Tie-Down Hook and Ring Selection
A guide to anchor interfaces and how hooks and rings suit the points you tie down to.
U.S. Tie-Down Strap Specification Worksheet
A worksheet to help you prepare a purchasing brief before you send an inquiry.