Dewin Technology Company Limited · Factory in Vietnam · For U.S. buyers
1 Inch Cam Buckles
We supply cam buckle hardware to U.S. distributors, private-label brands and hardware wholesalers. A cam buckle is bare hardware, separate from a finished ratchet or cam strap. Tell us the webbing width and thickness you plan to run, the clamping interface you need and the finish you expect, and our factory team reviews the specification with you before quoting.
Choose the buckle on its own terms
A bare cam buckle only works with the webbing it is matched to, so the sourcing decision starts with your webbing thickness and the grip you need, not with a finished strap. Our factory team in Vietnam reviews those details first, then confirms what we can offer for your build.
Select a cam buckle configuration
Before choosing a configuration, confirm five points: the webbing width you intend to run, the actual webbing thickness, the slot or hole layout of the buckle, the clamping tooth interface that grips the webbing, and the body and lever material with surface finish. Also tell us whether you need the buckle alone or sewn into your own strap, and which component documents you expect. Nominal 1 in describes webbing compatibility, not the outer body size.
Nominal 1 in metal cam buckle
The cam buckle family shown on DEWIN catalog p. 17, made for nominal 1 in webbing.
Catalog family reference; configuration is specified with your quotation.
Reference HC250050
Nominal 1 in metal cam buckle. Reference and pack count are recorded on purchase request form p. 5.
Packing: 700 pieces per carton
Slot layout, material grade and any test scope are specified with your quotation.
Match the slot to your webbing
The first decision is whether the buckle slot suits your webbing. A nominal 1 in buckle is meant for 1 in webbing, but slot width and webbing thickness decide whether it threads and grips properly. Send us your webbing details and a drawing or photo if you have one, and our factory team will review the fit before we discuss options.
Need a complete strap instead of hardware? See custom tie-down straps.
Slot width and webbing thickness are confirmed with your quotation. The structural sketch in the Drawings tab below shows where each dimension is measured.
Check grip, material and finish
The second decision is how the buckle grips and what it is made of. Before you approve a sample, we ask you to verify the clamping teeth on your own webbing, the body and lever material, the surface finish, and the component documents you need. Material grade and any performance value are stated only for the configuration named in your quotation.
Looking for a finished hand-operated strap? Visit ratchet straps.
Send your cam buckle brief
Partial details are fine. Name, email and phone are required.
How a cam buckle order moves
Five steps, with timing, cost and testing confirmed in your written quote.
- 1
Requirements and design
You share webbing details, quantity, destination and any drawing or photo.
- 2
Preproduction specification review
Our factory team checks slot, clamping interface, material and finish with you.
- 3
Sample approval
You check the buckle on your own webbing before moving ahead.
- 4
Production
Production follows the specification and sample you approved.
- 5
Shipping and payment review
We review shipping terms and payment details with you for the order.
What to specify for your quotation
A cam buckle is a component. The strength of a finished strap depends on the webbing, stitching, buckle and fittings working together, so any rating must come from documents covering that exact build. We do not quote a rating for a loose buckle on this page.
Catalog p. 17 shows our nominal 1 in metal cam buckle family, and purchase request form p. 5 records reference HC250050 at 700 pieces per carton. To quote your build, please tell us: the webbing width and thickness, the slot and body dimensions you need in inches (in), the body and lever material and finish, whether the buckle ships loose or sewn into your own strap, the quantity and destination, and any component documents you expect. A drawing or photo of your configuration helps; you can attach it to your inquiry. Send Inquiry with whatever you have and our factory team will ask for the rest.
Packing and accessories for loose buckles
Bulk and counted packing
The purchase request form records 700 pieces per carton for reference HC250050. Tell us how many buckles you need per bag or carton and how you handle receiving; packaging for loose hardware is agreed in your quotation, and strap packing is not used as proof of a buckle carton count.
Related components and accessories
The catalog p. 17 buckle shown is a loose part. If you also need a companion part, such as webbing to run it with, our factory team in Vietnam reviews it separately; it is not automatically included with the buckle. Exact items, quantities and compatibility are confirmed in the quotation for your configuration.
Cam buckle resources


Specification sketch
- W (in): rectangular webbing slot width.
- L (in): overall body length.
- H (in): opening height between the body and the hinged cam/press plate.
Simple top and side outline of a loose cam buckle with a hinged cam/press plate and no ratchet spool. Metal family reference; no material grade is assigned.
Buyer specification fields
Use these fields to plan a cam buckle brief. They are drawn from how component specifications are commonly laid out, and they do not confirm any additional supply size.
- Nominal webbing/slot width (in)
- Body length, thickness and clearance (in)
- Cam/lever interface
- Material or resin grade and finish
- Component-specific rating/test documents and pack quantity
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in).
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
You can attach your own configuration drawing when you request a quote, and we review it with the schematic fields above.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party component drawing: Cam Buckle Spec Sheet For the referenced third-party item only; not a DEWIN production drawing.
Competitor values are not DEWIN specifications, and none of their ratings or dimensions are used in our product specs.
Factory process footage
Our factory in Vietnam has real process video of webbing, sewing and assembly work. It shows how we work; it is not a performance test of any cam buckle SKU and does not establish a rating. Ask in your inquiry if you would like to see process footage relevant to your project.
Hardware catalog pages
Catalog p. 17 shows the nominal 1 in metal cam buckle family. Purchase request form p. 5 records reference HC250050 at 700 pieces per carton. Tell us the configuration you want and we confirm the matching catalog pages and component documents in your quotation.
Why send your buckle brief to our factory
We keep the process plain: you describe the buckle and webbing, we review it, and we tell you in writing what we can confirm and what still needs documents.
Specification first
We start with your webbing width, thickness and clamping needs before any quote discussion.
Component stays a component
Buckle requests are handled separately from finished straps, so no assembly claim is borrowed.
Documents by name
Tell us which component documents you expect, and we confirm what exists for your configuration.
Direct factory contact
Your brief goes to our factory team in Vietnam, not through a generic catalog form.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. If you want to start a buckle project, Send Inquiry.
Cam buckle questions
How long does a cam buckle order take?
Lead time depends on the buckle configuration, finish and quantity. Send your webbing details and order size, and we confirm timing in the actual quote.
Can I get a sample after I place an order?
Sample steps depend on the buckle and any marking you need. Tell us your plan in the inquiry, and we state the sample and order terms in the quote.
How long does shipping to the U.S. take?
Transit depends on quantity, packing and the freight method agreed for your destination. We confirm shipping terms and timing with the order details.
How do I check the status of my order?
Contact our factory team with your order details and we reply with where the order stands. Update steps are agreed when the order is confirmed.
Can I request samples of a cam buckle?
You can request one. Share the webbing width and thickness, the clamping interface and the finish you want, and we confirm sample availability and terms in the quote. Samples are not promised as free.
Cam buckle guides
Three guides from our factory team help buyers prepare a specification for hardware and straps. Browse the blog for more posts.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose webbing before you match a buckle to it.
November 15, 2026 · Read article
Tie-Down Hook and Ring Selection
A guide to anchor interfaces: which hook or ring suits the point you tie down to.
November 15, 2026 · Read article
U.S. Tie-Down Strap Specification Worksheet
A worksheet to help you prepare a purchasing brief before you contact our factory.
November 15, 2026 · Read article