Dewin Technology Company Limited · Factory in Vietnam
2 Inch Cam Buckles
We supply nominal 2 in metal cam buckles to U.S. distributors, private-label brands and hardware wholesalers. Tell us the webbing the buckle must hold, and we review the slot, webbing thickness, material and finish against your drawing or photo before we quote.
Choose the Buckle Before the Strap
A bare cam buckle clamps and holds webbing; it does not tension it the way a ratchet buckle does, so the first sourcing decision is the job the buckle must do. If you need a hold-and-adjust component for nominal 2 in webbing, start here. If the job calls for tensioning, look at our ratchet straps family instead.
Select a Buckle Configuration
Before you choose a buckle, confirm the nominal 2 in webbing it must accept, the webbing thickness it must clamp, the slot or hole layout in your drawing, the body and lever material, the surface finish, which component documentation you need, and your purchase unit. We check each point against your drawing or photo before quoting. Strap length and hooks are not part of a bare buckle.

HC500100
Nominal 2 in metal cam buckle · 200 pieces/carton · Source: catalog p17 and purchase request form p5
Photo: catalog family reference. Slot drawing, material and finish are specified with your quotation.
Your own buckle drawing
Have a buckle design or a sample photo for nominal 2 in webbing? Attach it to your inquiry and our factory team will review the slot, material and finish with you.
Webbing Slot and Thickness
The 2 in in this page's title is the nominal webbing width the buckle is meant to accept. It is not the outer size of the body. What decides whether the webbing holds is the slot opening, the webbing thickness and the clamping interface, so send us the webbing you use or a drawing of the buckle you need. The structural sketch in the Drawings tab under Buckle Resources shows the width, length and opening dimensions a brief should cover.


Material, Finish and Documents
Before you approve a sample, we confirm what the body and lever are made of, how the surface is finished, and which documents cover this component. We state a material grade or finish performance only when it is documented for the buckle you are reviewing. A buckle is not a finished strap, so any strap rating is a separate question. See custom tie-down straps for complete assemblies.
Send Your Buckle Brief
Partial information is fine. Tell us the webbing the buckle must hold and what you need to know, and our factory team will follow up.
How an Order Moves
-
1
Requirements and design
You send the webbing, drawing or photo and the purchase unit you need.
-
2
Preproduction specification review
We check slot, thickness, material, finish and documents against the drawing.
-
3
Sample approval
You compare the sample with the agreed specification before production is released.
-
4
Production
The buckles are made to the approved specification and marking.
-
5
Shipping and payment review
Shipping and payment terms are reviewed with you for the confirmed order.
What to Specify for Your Quotation
Dewin Technology Company Limited reviews each cam buckle as a stand-alone component. A figure or test that belongs to a buckle does not describe a finished strap, and a strap rating cannot be read back onto the buckle. The more of the points below you can name, the faster our factory team can quote.
Our reference point: catalog page 17 shows our nominal 2 in metal cam buckle family, and page 5 of our purchase request form records reference HC500100 at 200 pieces/carton.
What to tell us: the webbing width and thickness, the slot or hole layout, the body and lever material or grade you require, the finish, any logo marking, the documents or test evidence you need for the buckle, and your purchase unit. Dimensions, grades and documents are confirmed in the quotation for the configuration you describe. Send Inquiry with your drawing or photo to start.
Packaging and Accessories
Loose Component Packing
Bare buckles ship as components, so bags, cartons and counts are set by your purchase unit. Our purchase request form records 200 pieces/carton for HC500100; packaging is agreed in the quotation for your order.

Related Components and Accessories
Companion parts, such as webbing or other hardware listed in our catalog, are reviewed as separate items. They are not automatically included with a buckle order. Tell our factory team in Vietnam which related parts your U.S. order requires, and we confirm the exact items, quantities and compatibility for the quoted configuration.
Photo: real hardware assembly at our factory, shown as context. It does not identify a specific accessory or confirm compatibility.
Buckle Resources


- W (in) — webbing slot width
- L (in) — body length
- H (in) — cam/plate opening
Loose metal cam buckle family reference, shown as a top and side outline with a rectangular slot and a hinged cam plate. No ratchet spool. No material grade is assigned.
Specification sketch
Use this generic sketch to plan the fields a cam buckle brief should cover. It explains the geometry only and is not a signed drawing for a specific item.
- Nominal webbing/slot width (in)
- Body length, thickness and clearance (in)
- Cam/lever interface
- Material or resin grade and finish
- Component-specific rating/test evidence and pack quantity
Lengths of finished long straps and rolls use documented whole ft; local component and short-end dimensions use in.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration. When you request a quote, attach your own configuration drawing and we will review it with you.
Third-party reference
Third-party reference: US Cargo Control specification reference
Third-party component drawing
Third-party component drawing: Cam Buckle Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing. Third-party values are not DEWIN specifications.
Factory Process Videos
Our factory in Vietnam documents its own operations, including webbing looms, strap sewing and assembly, and a tensile-test machine. These process videos show how work is done in our factory. They are not a performance test of a specific buckle or SKU.
If a process view would help your review, mention it in your inquiry and our factory team will tell you what can be shared for your brief.

Hardware Catalog
Catalog page 17 shows our nominal 2 in metal cam buckle family, and our purchase request form p5 records reference HC500100 at 200 pieces/carton. Name the catalog reference you are interested in and the configuration you need, and we will respond with the details for your quotation.
Why Send Your Buckle Brief to Our Factory
Our factory in Vietnam works from your drawing and your questions, and keeps each document tied to the item it covers.
Specification first
We review the webbing slot, thickness and material questions before quoting.
Photo and drawing matched
A picture is shown with a model only when both refer to the same item.
Component records kept apart
Buckle documents are named for the buckle and never presented as strap ratings.
Partial briefs welcome
Send what you have, even a photo, and we will tell you what is still needed.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. To discuss a private-label buckle brief, Send Inquiry.





Cam Buckle Questions
What is the lead time for cam buckles?
Lead time depends on the buckle, finish, marking and quantity. We confirm it in the quote once we have your drawing or photo and purchase unit.
Can I get a sample after I place an order?
Sample approval is a step before production. Whether it is a preproduction sample or a production sample, we agree that with you in the quote, based on the specification you send.
How long does shipping to the United States take?
Shipping time depends on the route, carton count and destination. We review it with you for the confirmed order and state it with the quote, not before.
How will I know the status of my order?
Status updates are arranged with our factory team using the contact details in your inquiry once the order is confirmed.
Can I request samples of a bare buckle?
You can request one in your inquiry. Whether a sample is offered, its quantity and any cost are confirmed in the quote for the buckle you describe.
Related Buckle Reading
Three guides from our factory team on webbing, anchor hardware and purchasing briefs. Browse the blog for more articles.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing your buckle and strap brief should name.
Tie-Down Hook and Ring Selection
A guide to anchor interfaces, so you can match the hook or ring to the point it must attach to.
U.S. Tie-Down Strap Specification Worksheet
A worksheet that helps you prepare a purchasing brief before you send your inquiry.
Home · Contact · Custom Tie-Down Straps · Ratchet Straps · Blog