Dewin Technology Company Limited · Factory in Vietnam
2-Inch Ratchet Buckles
We supply 2 in ratchet buckles to U.S. distributors, private-label brands and hardware wholesalers. We review each inquiry as a metal component request: which 2 in nominal webbing the buckle must accept, how the handle works, and what material and finish the body needs. Tell us what you are sourcing and we will reply with the details we need to quote.
Buckle First, Finished Strap Second
Sourcing a 2 in ratchet buckle is a decision about a metal component: whether its slot accepts your intended 2 in nominal webbing, how the handle operates, and what material and finish the body needs. Our factory team in Vietnam settles those points with you before any finished strap is discussed.
Select a 2 in Buckle Configuration
Four reference codes from our purchase request form (p. 5) are listed below with handle type and carton count. All belong to the 2 in nominal ratchet buckle family shown on catalog p. 16, a galvanized steel family with handle variants. Choose the code closest to your need, then tell us your intended webbing, slot geometry, material grade, finish and purchase unit in your inquiry. A buckle figure never rates a finished strap, so send your own component drawing or photo if you have one.
HR500300
Plastic handle · 20 pieces/carton
- Webbing: 2 in nominal (catalog p. 16 family)
- Handle and pack: plastic handle; 20 pieces/carton (purchase request form p. 5)
- Slot geometry, material grade and finish: specified with your quotation
P-HR500300
Aluminium handle · 20 pieces/carton
- Webbing: 2 in nominal (catalog p. 16 family)
- Handle and pack: aluminium handle; 20 pieces/carton (purchase request form p. 5)
- Slot geometry, material grade and finish: specified with your quotation
HR500500
Plastic handle · 20 pieces/carton
- Webbing: 2 in nominal (catalog p. 16 family)
- Handle and pack: plastic handle; 20 pieces/carton (purchase request form p. 5)
- Slot geometry, material grade and finish: specified with your quotation
P-HR500500
Aluminium handle · 20 pieces/carton
- Webbing: 2 in nominal (catalog p. 16 family)
- Handle and pack: aluminium handle; 20 pieces/carton (purchase request form p. 5)
- Slot geometry, material grade and finish: specified with your quotation
Match the Slot to 2 in Webbing
The 2 in size describes the webbing the buckle is meant to accept, not the outside size of the metal body. What decides fit is the slot or mandrel opening, together with the thickness of the webbing you plan to use. A drawing or a sample buckle is the fastest way for us to check this. The specification sketch in the Drawings tab of Buckle Resources below shows which dimensions to describe.
Handle, Material and Finish Before Samples
Before approving a sample, check the handle form and how it operates, the material grade named for the body, the surface finish, and which component-specific document applies. Our catalog (p. 16) shows a galvanized steel buckle family with handle variants; the exact grade and finish for a given code are confirmed in writing. Any figure given for a buckle belongs to that component only. Need a finished assembly instead? See our ratchet straps or custom tie-down straps.
Send Your Buckle Brief
Partial information is welcome. Name, email and phone are required; the rest helps us review the component faster.
How the Order Moves
-
1
Requirements and design
You share the buckle brief, drawing or photo.
-
2
Preproduction specification review
Slot geometry, handle, material and finish are confirmed in writing.
-
3
Sample approval
You check the sample against the agreed specification.
-
4
Production
Production follows the approved sample and specification.
-
5
Shipping and payment review
Shipping method and payment terms are reviewed against your quote.
What to Specify for Your Quotation
A ratchet buckle is a metal component. Any strength figure for it applies only to the named component and its test condition, never to a finished strap, which also depends on webbing, stitching and end fittings.
Starting point: the 2 in nominal ratchet buckle family on catalog p. 16 (a galvanized steel family with handle variants), and four purchase-form codes with handle type and 20 pieces/carton: HR500300 and HR500500 with plastic handle, P-HR500300 and P-HR500500 with aluminium handle.
Please tell us: your intended 2 in webbing and its thickness, the slot or opening dimensions in in, the handle form, the material grade and finish you need, any component-specific document or test scope you require, and your purchase unit and destination. Send Inquiry with your drawing or sample reference and we will confirm what can be documented for the quoted configuration.
Packaging & Accessories
Loose Buckle Packing
The photo shows an actual carton of 2 in family ratchet buckles, with 20 pieces shown. The purchase request form lists 20 pieces/carton for HR500300, P-HR500300, HR500500 and P-HR500500. Tell us your purchase unit and any marking or labeling you need; packaging for your order is agreed in the quotation.
Companion Parts
Our catalog lists 2 in webbing as a companion to the buckle. It is a separately reviewed part and is not included automatically. Name any other parts in your brief, and each one is reviewed individually, with its own specification, before it is quoted.
Buckle Resources
Specification sketch
- W (in) — slot width the buckle is meant to accept.
- L (in) — overall body length of the loose buckle.
- H (in) — handle clearance with the handle raised.
- Loose ratchet buckle only: no strap assembly and no hooks are shown.
Buyer specification fields
- Webbing slot width (in)
- Body length and frame thickness (in)
- Handle type and opening clearance (in)
- Spool/attachment interface
- Material grade and finish
- Component-specific documented load/test scope and pack quantity
Lengths of finished long straps and rolls use documented whole ft; local component and short-end dimensions use in. Existing DEWIN confirmed nominal dimensions and reference codes remain in the product cards above, unchanged. This sketch does not confirm additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
You can attach your own configuration drawing when you request a quote; it helps us check the slot, handle and finish against your requirement.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party component drawing: Ratchet Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing. Third-party values are not DEWIN specifications.
Our factory photos and process footage show how hardware is handled and assembled at our Vietnam factory. They illustrate our process only and are not a performance test of any buckle model or code.
If you need to see how a particular handle opens, closes and releases, describe the configuration in your inquiry and our factory team will tell you what can be shared.
Catalog p. 16 shows the 2 in nominal ratchet buckle family: a galvanized steel family with handle variants. The purchase request form (p. 5) lists four references for it: HR500300 and HR500500 with plastic handle, P-HR500300 and P-HR500500 with aluminium handle, each at 20 pieces/carton.
Tell us which configuration you are considering and our factory team will confirm the component details for your quotation.
Why Send the Brief to Our Factory
The value of an inquiry here is a clear record: what you asked for and what we confirm for your quoted configuration. We make no claim beyond the documents we can show you.
Component-First Review
Your brief is read as a buckle request, with no strap length or hook end assumed.
Drawing and Photo Check
We compare your files with the slot, handle and finish you describe.
Clear Evidence Limits
Component figures stay with the component and are never stretched to a finished strap.
Direct Factory Route
Your inquiry goes to our factory team in Vietnam, not through a long chain of intermediaries.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. If you would like to discuss a private-label buckle, Send Inquiry and describe your marking needs.
Buckle Inquiry FAQ
How long does production take?
Timing depends on the buckle configuration, finish, quantity and current factory schedule. Send the slot geometry, handle form, material grade and quantity, and the production time will be confirmed with your actual quote.
Can I get a sample after I place an order?
Tell us whether you want a sample before ordering or from the first production run. Availability, sample terms and timing for your buckle are confirmed in the quote, and nothing is promised in advance.
How long will shipping take?
Shipping time depends on the U.S. destination, shipping method and packing for the quoted components. Share your destination and purchase unit, and we will state the shipping details in your quote.
How can I check my order status?
We do not promise an online tracking portal. After your order is confirmed, our factory team will agree on how updates are sent, and you can ask for a status check with your order details at any time.
What should I include when I request samples?
Include the intended 2 in webbing and its thickness, a slot drawing or photo, preferred handle form, material grade and finish. Sample cost and terms, including whether any charge applies, are confirmed with the quote.
Related Articles
Three guides from our factory team for U.S. buyers preparing a purchasing brief: webbing materials, anchor interfaces and a specification worksheet.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose webbing for your tie-down brief.
Tie-Down Hook and Ring Selection
A guide to anchor interfaces: how hooks and rings meet the points on your equipment.
U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing your purchasing brief before you contact our factory team.