Dewin Technology Company Limited · Factory in Vietnam
3 Inch Ratchet Straps
Compare complete 3 inch ratchet strap assemblies by webbing, ratchet, end fittings and label. We review your specification before we quote.
Choose the whole assembly, not just the buckle
A typical two-piece 3 inch ratchet strap combines webbing, a ratchet, a fixed short end and a running long end, with the specified end fittings and an assembly label. We review those parts against your application and destination, so the configuration you compare is the one described in your specification.
Select a 3 inch configuration
Our 3 in nominal ratchet strap family is listed below by reference code with its catalog pack count. Overall length in ft, end fittings and any rating are specified with your quotation. Use the checklist to prepare your brief; for the wider range, see our ratchet straps or custom tie-down straps.
- Complete assembly model
- Nominal width in inches (3 in family)
- Overall length in whole feet
- Fixed short end and running long end
- End fittings on each end
- Whole-assembly WLL (lb) and breaking figures
- Label and packing
RJ7508003
- Nominal width
- 3 in family
- Catalog pack
- 16 sets/carton
RJ7508005
- Nominal width
- 3 in family
- Catalog pack
- 14 sets/carton
RJ7508006
- Nominal width
- 3 in family
- Catalog pack
- 12 sets/carton
RJ7508008
- Nominal width
- 3 in family
- Catalog pack
- 10 sets/carton
RJ7508010
- Nominal width
- 3 in family
- Catalog pack
- 8 sets/carton
RJ7508012
- Nominal width
- 3 in family
- Catalog pack
- 8 sets/carton
Codes and pack counts come from our purchase request form. Overall length in ft, end fittings and any rating are confirmed in your quotation for the configuration you choose.
Fix the assembly structure first
For a 3 inch ratchet strap, the first decision is how the two ends are built: a fixed short end carrying the ratchet, a running long end threaded through it, and the fitting on each. Tell us the load path you expect and the hardware you prefer, and our factory team in Vietnam will confirm what can be built before any rating is discussed.
Send InquiryRatings apply to the finished assembly, not to a buckle or webbing alone, and are shown only when documentation covers that exact configuration. The specification sketch in Resources shows the dimensions to define.
Confirm length and fittings before sample approval
Overall length in whole feet and the fittings on each end decide whether a strap fits your use. Before you approve a sample, we check the nominal 3 in width, the stated length, the fitting type and the label against your written brief, so what you inspect matches what was agreed.
Need a branded build? See custom tie-down straps.
Send InquirySend your brief
How your order moves
- 1
Requirements and design
You share the application, size and fitting needs, plus any drawing or logo.
- 2
Preproduction specification review
Our factory team checks the specification and confirms what can be built.
- 3
Sample approval
You review the agreed configuration before production is released.
- 4
Production
The approved build is produced in Vietnam.
- 5
Shipping and payment review
Shipping and payment terms are reviewed and confirmed in your quote.
What to specify for your quotation
A ratchet buckle is a metal component; a 3 inch ratchet strap is the finished assembly built around it, so each is quoted as what it is. Our English catalog (pp. 12–13) covers the 3 in nominal ratchet strap family, and the reference codes above (RJ7508003, RJ7508005, RJ7508006, RJ7508008, RJ7508010 and RJ7508012) come with catalog pack counts. To quote the strap you need, tell us the overall length in whole ft, the end fitting on each end, the ratchet style, webbing material and color, any logo or label, and the quantity and U.S. destination. If you need a rating or supporting document, name it and the finished configuration it must cover. Have your own drawing or reference? Send Inquiry and our factory team in Vietnam will review it with your brief.
Packaging and accessories
Private-label carton and polybag packing
Branded cartons or polybags can carry your label and strap details for distributor stock. Tell us the strap assembly, label content and pieces per pack you need; packaging is agreed in the quotation.
Real TITAN branded cartons from our factory — a company-level packing example, not proof of an exact model, quantity or pack count.
Related components and accessories
Our hardware catalog includes loose end fittings such as the double J hook shown. A companion part like this is reviewed separately and is not automatically included with a strap. Tell our factory team in Vietnam which related parts your U.S. order requires, and we confirm the exact items, quantities and compatibility for the quoted configuration.
Catalog image of a loose part — not proof that it is fitted to any 3 in code above. Specifications for any loose part are confirmed in your quotation.
Resources
- W
- Nominal webbing width, in inches (in)
- L
- Overall assembly length, in whole feet (ft)
- S
- Fixed short-end length, in inches (in)
Left to right: end fitting outline, plain webbing, ratchet body outline, short fixed webbing end, end fitting outline. The parts are not proportioned to each other.
Specification sketch
Use this sketch to plan the fields of your brief. Lengths of finished long straps and rolls use documented whole feet (ft); local component and short-end dimensions use inches (in).
- Nominal webbing width (in)
- Overall assembly length (whole ft)
- Fixed short-end length (in)
- End fitting type and interface (in)
- Ratchet/cam style and handle clearance
- Material, color, marking and pack quantity
- Documented finished-assembly WLL (lb) and assembly break strength (lb), separately from raw-webbing strength
Confirmed DEWIN nominal dimensions and reference codes stay in the product cards on this page. This sketch does not confirm additional supply sizes.
We check the assembly drawing, label and sample for the finished strap before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This generic schematic explains the geometry only. If you have your own configuration drawing, attach it when you request a quote and we will review it with your brief.
Third-party reference
- Third-party referenceUS Cargo Control specification reference
- Third-party referenceElohim 4 in × 30 ft product reference
These links show how other sellers format specifications. Their values are not DEWIN specifications, and no competitor ratings or dimensions are used in our product data.
If you have your own drawing, attach it to your inquiry.
Factory and product video
Real strap sewing. This is a production-process video; it is not a performance test or demonstration of an exact SKU, length or rating.
Catalog reference
Our English catalog covers the 3 in nominal ratchet strap family. The reference codes on this page are RJ7508003, RJ7508005, RJ7508006, RJ7508008, RJ7508010 and RJ7508012, each with its catalog pack count. The illustration shows the family; overall length, end fittings and ratings are specified with your quotation.
Name the reference code or configuration you are considering and our factory team will reply with the details that apply.
Why send your brief to our factory team
Our process is a documented review of your request, not a list of claims. Here is what you can expect from an inquiry.
One brief, one review
Application, width, length and fittings are checked together, so questions come back in one pass.
Assembly kept apart from components
We name whether you are asking about a finished strap or a part, and quote each as what it is.
Photos matched model by model
An image is used only for the configuration it truly shows, never as a stand-in for another.
Documents on request
Ratings and test papers are discussed only when they cover the named finished configuration.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. Planning a private-label line of your own? Send Inquiry.
POLARIS
MULTIPRENS USA
FLOYD
TITAN
LocknLock
3 inch ratchet strap questions
How long does an order take?
Timing depends on the configuration, quantity, fittings, label and packing. Send the application, length in ft, end fittings and quantity, and we will confirm timing in your quote.
Can I get a sample after I place an order?
Whether a sample or preproduction check fits your order depends on the configuration. We settle that with the quote, so it is agreed in writing before you commit.
How long does shipping take?
Shipping time depends on destination, method, packing and quantity. Give us your U.S. destination and we will confirm the details with your quote.
How do I follow my order status?
Order updates go through direct contact with our factory team. The exact way we keep you informed is confirmed when your order is arranged.
Do you offer samples?
Sample availability and any related cost are confirmed with the quote for your configuration. Please describe the strap you need and we will reply with what applies.
Related reading
Send InquiryThree buyer guides for U.S. teams comparing 3 inch ratchet straps, covering webbing material, anchor hardware and how to prepare your brief.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing before you specify a strap.
Tie-Down Hook and Ring Selection
How to match hooks and rings to the anchor points on your equipment.
U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing a purchasing brief before you contact our factory.