1-Inch Ratchet Buckles
We supply bare ratchet buckle bodies as components for U.S. distributors, private-label brands and hardware wholesalers. They are separate from finished straps. Send us the webbing width you plan to pair with the buckle, your slot and handle preferences, and any drawing you have. We review the buckle details with you before quoting.
Buy the buckle, not a guess
When you source a 1-inch class ratchet buckle, the decision is whether the handle, the slot and the buckle material suit the webbing you plan to pair with it. We list the buckle body on its own, so the details you confirm stay tied to the component you are buying and never to a finished strap.
Compare bare ratchet buckles
Our catalog (p. 16) lists a 1 in nominal ratchet buckle family in galvanized steel with handle variants. Our purchase request form (p. 5) gives two reference codes with carton counts. A nominal inch size here means the webbing width the buckle is intended to accept, not the outer size of the buckle body. Use this checklist when you describe the buckle you need:
- Intended webbing width (nominal in)
- Slot, mandrel and opening geometry
- Handle configuration
- Material grade
- Surface finish
- Webbing thickness it must grip
- Component-specific test documents
- Purchase unit
1 in ratchet buckle family
1 in nominal ratchet buckle family, galvanized steel family with handle variants (catalog p. 16). Catalog family reference; configuration is specified with your quotation.
HR250050
1 in nominal ratchet buckle family, galvanized steel family (catalog p. 16). Purchase request form p. 5: 100 pieces per carton.
Handle, slot geometry, material grade, finish and any rating are specified in your quotation.
HR250100
1 in nominal ratchet buckle family, galvanized steel family (catalog p. 16). Purchase request form p. 5: 60 pieces per carton.
Handle, slot geometry, material grade, finish and any rating are specified in your quotation.
Handle and webbing slot: decide these first
A ratchet buckle works only when its slot and mandrel suit the webbing it will hold, and when its handle gives the grip your users expect. Tell us the nominal webbing width you intend, the webbing thickness, and whether you need a long or short handle. We compare those details against the buckle drawings during our review, before any quote. The structural sketch in the Drawings tab below shows the dimensions to describe.
Material and finish before sample approval
Before you approve a buckle sample, confirm the material grade, the surface finish and what any component figure was measured on. Ask for each in writing for the exact buckle you are sampling. A figure for a bare buckle describes that component only and does not rate a finished strap.
Tell our factory team what you need
Share what you know about the bare buckle. Partial details are welcome, and we will ask for the rest.
How an order moves forward
Requirements and design
You send the buckle requirements, drawings or photos.
Preproduction specification review
We check slot, handle, material and finish details with you.
Sample approval
You review a buckle sample against the agreed specification.
Production
Production starts from the approved buckle specification.
Shipping and payment review
We go over shipping and payment terms with you for the order.
What to specify for your quotation
A bare ratchet buckle is one part of a tie-down strap, so any strength figure for the buckle belongs to the buckle alone and says nothing about a finished strap. Our catalog (p. 16) describes a 1 in nominal ratchet buckle family in galvanized steel with handle variants, and the purchase request form lists HR250050 and HR250100 with their carton counts. To quote the buckle you need, tell us the intended webbing width in inches, the slot and handle you want, the material grade and finish, and any component-specific document you require. If you have a drawing or photo of your own, attach it. We review each item with you and confirm the specification in the quotation.
Packing loose buckles
Our purchase request form lists carton counts of 100 pieces for HR250050 and 60 pieces for HR250100. Tell us how you want buckles counted and packed, such as bulk cartons or inner bags. Packaging for your order is agreed in the quotation.
Related components and accessories
The catalog image above (p. 16) is a reference illustration of a loose ratchet buckle. A companion part is reviewed separately for your order and is not automatically included with the buckle. Tell our factory team in Vietnam which related parts your U.S. order requires, and we confirm the items, quantities and compatibility in the quotation.
Buckle resources
Each tab holds one type of resource: catalog and factory images, a structural sketch, process information and the catalog family reference.
Buckle drawings
The generic schematic below is a planning aid for describing the buckle you need. When you request a quote, attach your own configuration drawing and we will review it against the buckle you need.
Specification sketch
- WWebbing slot width (in)
- LBody length (in)
- HHandle clearance (in)
Loose ratchet buckle shown as frame, spool and raised handle in simplified side and top views. No strap assembly or hooks are shown, and the sketch carries no numeric dimensions, tolerances or test values.
Buyer specification fields
- Webbing slot width (in)
- Body length and frame thickness (in)
- Handle type and opening clearance (in)
- Spool/attachment interface
- Material grade and finish
- Component-specific documented load/test scope and pack quantity
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). Confirmed DEWIN nominal dimensions and reference codes remain in the product cards above; this sketch does not confirm additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
Attach your own configuration drawing when you request a quote, and we will review it alongside this schematic.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party component drawing: Ratchet Spec Sheet For the referenced third-party item only; not a DEWIN production drawing.
Competitor values are not DEWIN specifications, and none are copied into our product specifications.
Factory process video
Our factory process video shows hardware assembly and strap production at our Vietnam factory. It is a view of how we work, not a performance test of any buckle model, and it carries no load rating. Ask our factory team for the process footage when you send your inquiry.
Hardware catalog
The catalog describes a 1 in nominal ratchet buckle family in galvanized steel with handle variants. Our purchase request form lists HR250050 (100 pieces per carton) and HR250100 (60 pieces per carton). Tell us which configuration you want and we will specify it in your quotation.
Why buyers start with a buckle review
Our process is a documented inquiry, not a catalog click. These are the steps we follow with you.
Component-only scope
We keep the bare buckle separate from the finished strap, so each detail we review applies to one part.
One checklist for every buckle
Webbing width, slot geometry, handle, grade and finish are collected the same way for each buckle you ask about.
Drawings and photos matched
We pair any photo or drawing with the buckle it describes before it is quoted from.
Terms confirmed in the quote
Quantity, packing, timing and documents are stated with your quote, not assumed from this page.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Buckle questions
What is the lead time for ratchet buckles?
Lead time depends on the buckle model, material, finish and quantity. Send your specification and order details and we confirm timing with the actual quote.
Can I get a sample after I place an order?
Sample approval is a step before production. Tell us about your order and the buckle you want, and we confirm how sampling works for it with your quote.
How long does shipping take?
Shipping time depends on the destination, packing and shipping method. Include your delivery location in the inquiry and we confirm the details with the quote.
How will I know the status of my order?
Tell us in your inquiry how you prefer to receive updates. We confirm how order status is shared when we confirm your quote.
Can I request a buckle sample?
Yes, you can request one in your inquiry. Describe the webbing width, slot, handle, material and finish you want to evaluate. Sample availability and terms are confirmed with the quote.
Related buckle guides
Three guides for buyers specifying tie-down hardware and webbing. You can also browse the blog for current articles.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing that suits your application.
Tie-Down Hook and Ring Selection
A guide to anchor interfaces and how hooks and rings connect to your tie-down points.
U.S. Tie-Down Strap Specification Worksheet
A worksheet to help you prepare a purchasing brief before you contact our factory team.