Dewin Technology Company Limited · Our factory in Vietnam
1.5-Inch Ratchet Buckles
We review bare ratchet buckle components for U.S. distributors, private-label buyers and sourcing teams. The 1.5-inch size describes the nominal webbing the buckle is meant to accept. Send your drawing, photo or specification and we will confirm what can be quoted.
Catalog family reference; configuration is specified with your quotation
Define the buckle before you define the strap
Sourcing a 1.5-inch ratchet buckle starts with what the component must accept and how it must operate: the nominal webbing width it is intended for, the webbing thickness, the handle style, the material and the finish. Our factory team in Vietnam reviews those inputs before quoting, and any figure that belongs to a buckle stays separate from the rating of a finished strap.
Choose a buckle configuration
Our catalog lists a 1.5 in nominal ratchet buckle family in galvanized steel with plastic and aluminum handle variants. Two reference codes are shown below, each packed 50 pieces per carton. Slot geometry, material grade and any rating are specified with your quotation. For each bare buckle, check the nominal webbing width in inches it is intended for, the slot, mandrel or opening geometry, the handle configuration (plastic or aluminum), the material grade, the surface finish, the webbing thickness it must clear, and the purchase unit. Looking for finished assemblies instead? See our ratchet tie-down straps.
1.5 in ratchet buckle family
Galvanized steel family · plastic and aluminum handle variants
Catalog family reference image. The configuration you need is specified with your quotation.
Ratchet buckle HR380150
Aluminum handle · 50 pieces per carton
Nominal family 1.5 in. Tell us your webbing thickness, finish and quantity, and we confirm the remaining specification in the quotation.
Ratchet buckle P-HR380150
Plastic handle · 50 pieces per carton
Nominal family 1.5 in. Tell us your webbing thickness, finish and quantity, and we confirm the remaining specification in the quotation.
Plastic handle or aluminum handle?
Handle material is a specification line, not an afterthought. Tell us whether your 1.5-inch buckle needs a plastic or an aluminum handle, any color or finish preference, and whether it needs a logo. We then confirm with our factory team what can be offered for that configuration before a quote is prepared.
Check the fit before sample approval
A buckle only works with the webbing it was designed around. Before you approve a sample, compare these points against the drawing:
- Slot, mandrel and opening geometry against your webbing width and thickness
- Handle configuration and release action as drawn
- Material grade and finish callout
- Component-specific documents, if you require them
Building a private-label assembly? See our custom tie-down straps page.
Send your buckle brief
Partial information is fine. Tell us what you have and our factory team will follow up on the rest.
How an inquiry moves forward
- 1
Requirements and design
You share the buckle brief, drawing or photo.
- 2
Preproduction specification review
We check webbing fit, geometry, handle, grade and finish with you.
- 3
Sample approval
You compare the sample against the agreed specification.
- 4
Production
Our factory in Vietnam proceeds once the specification is confirmed.
- 5
Shipping and payment review
Terms and documents are confirmed in the quote for your order.
What to specify for your quotation
A bare ratchet buckle is one component. Any strength, hardness or test figure attached to a buckle applies only to the part it was measured on and never rates a finished strap built with it. To quote accurately, tell us the nominal webbing width in inches and the webbing thickness, the slot, mandrel and opening geometry you need, the handle type (plastic or aluminum), the material grade and finish, the pack quantity, and your U.S. destination. If you need a rating, test result or other document, name the part, the grade and the test object, and we will confirm what can be provided for that configuration. A drawing or photo of your buckle speeds up the review. Send Inquiry
Packaging and accessories
Loose buckle packing
The purchase request form lists 50 pieces per carton for HR380150 and P-HR380150. Bag, carton and label requirements for loose buckles are agreed in the quotation for your order.
Related components and accessories
Catalog reference image of a loose buckle part, not a matched model drawing.
A companion part, such as a different handle version or a related hardware piece, is a separately reviewed line item and is not automatically included with a buckle order. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities and compatibility are confirmed in the quotation for your configuration.
Buckle resources



Specification sketch
A simple planning aid for the bare 1.5-inch ratchet buckle: frame, spool and raised handle, with the three local dimensions we ask buyers to define. No strap assembly or hooks are shown.
- W (in)
- Slot width
- L (in)
- Body length
- H (in)
- Handle clearance
Buyer specification fields
- Webbing slot width (in)
- Body length and frame thickness (in)
- Handle type and opening clearance (in)
- Spool/attachment interface
- Material grade and finish
- Component-specific documented load/test scope and pack quantity
Lengths of finished long straps and rolls use documented whole feet (ft); local component and short-end dimensions use inches (in). Reference codes and pack counts are listed in the product cards above. This sketch does not confirm additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
The schematic explains the geometry we ask you to define. If you have your own configuration drawing, attach it when you request a quote and we will review it against your webbing.
Third-party references
- Third-party reference: US Cargo Control specification reference Competitor values are not DEWIN specifications.
- Third-party component drawing: Ratchet Spec Sheet For the referenced third-party item only; not a DEWIN production drawing.
Factory process video
Our factory in Vietnam documents its own process on video, including webbing looms, strap sewing and assembly, and a tensile-test machine. This footage shows factory operations and equipment. It is not a performance test of a specific buckle model and does not state a rated load or test result.
If you want to see how a buckle handle works or how webbing seats in the buckle for your configuration, mention it in your inquiry.
Catalog pages
The catalog describes a 1.5 in nominal ratchet buckle family in galvanized steel with plastic and aluminum handle variants. The purchase request form lists HR380150 (aluminum handle) and P-HR380150 (plastic handle), 50 pieces per carton each.
Why send your buckle brief to our factory
Our process is about getting the specification and the documents right before a sample is made. No certification or performance claim is made on this page.
A component-first brief
We treat the buckle as its own part, separate from the finished strap it may end up in.
Specification review first
Webbing fit, geometry, handle, grade and finish are reviewed with you before sampling.
Photos tied to models
An image is matched to a model only after the drawing and sample agree.
Documents named by part
If you need a document, tell us the part and test object so we can say what exists.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. Want to discuss a private-label buckle? Send Inquiry
Ratchet buckle questions
What is the lead time for 1.5-inch ratchet buckles?
Lead time depends on the buckle configuration, quantity and current factory schedule. Send the nominal webbing width, handle type, material, finish and quantity, and we will state the timing in your quote.
Can I get a sample after I place an order?
Sample steps are agreed per order. Tell us the buckle specification you want to approve, and the quote will state whether a sample is possible, when it is made and on what terms.
How long does shipping take?
Shipping time depends on quantity, packing and your U.S. destination. Share the destination and carton needs for the buckles, and we confirm shipping terms with the quote.
How will I know the status of my order?
We agree how updates are sent when the quote is confirmed. No online order portal is assumed on this page.
Do you offer samples of ratchet buckles?
Sample availability and cost are confirmed per request, and no free-sample offer is made here. Include your drawing or photo, nominal webbing width, handle type and finish so we can review it.
Related buckle articles
Three guides to help you prepare your brief. The blog lists everything else we have published. For a specific question, use the contact page.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you state the webbing material in your purchasing brief.
Tie-Down Hook and Ring Selection
A guide to anchor interfaces and how hook and ring choices fit your application.
U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing a complete purchasing brief before you contact our factory team.


