Dewin Technology Company Limited — factory in Vietnam
3-Inch Ratchet Buckles
We supply ratchet buckle components sized for 3 in nominal webbing to U.S. distributors, private-label brands and hardware wholesalers. Send the webbing, handle style, material grade and finish you need, and our factory team reviews them before we quote.
Choose the buckle for the webbing it must grip
A 3-inch ratchet buckle is specified by the webbing it is meant to accept, not by its outer size. Before a request becomes a quote, our factory team wants to know the webbing width and thickness, the slot or opening geometry, and the material grade and finish, so the component is matched to your webbing rather than to a catalog heading.
Select a buckle configuration
Our catalog lists the ratchet buckle for 3 in nominal webbing as a galvanized steel family with handle variants. Choose a reference below, or describe the configuration you need and we quote it for your webbing.
3 in ratchet buckle family
Galvanized steel family with handle variants, for 3 in nominal webbing (DEWIN catalog, p. 16).
Catalog family reference; configuration is specified with your quotation.
HR750700
Ratchet buckle, 3 in nominal webbing family — 6 pieces/carton (purchase request form, p. 5).
Slot geometry, handle style, material grade and finish are confirmed in your quotation.
Your own configuration
Working from a drawing, a sample or a private-label brief? Send the webbing width and thickness, handle type, material grade, finish and quantity, and we review it with you.
Match the buckle to your 3 in webbing
A 3 in nominal width names the webbing the buckle is meant to accept. It does not describe the buckle body. Webbing thickness, slot or mandrel opening geometry and handle configuration decide whether that webbing feeds, grips and releases as intended, so we ask for them first.
The structural sketch under Drawings in Buckle resources shows the slot width, body length and handle clearance we ask you to specify.
Need finished assemblies instead of bare components? See our ratchet straps.
Verify the component before sample approval
Sample approval should rest on the buckle itself: the confirmed material grade, finish, handle configuration and the webbing it was fitted against. Any figure for a buckle describes that component only and never rates a finished strap. If you need a complete assembly, see our custom tie-down straps.
Tell us about your buckle requirement
Partial information is fine. Fields marked with an asterisk are required.
How your inquiry moves
-
1
Requirements and design
You share the webbing, slot geometry, handle and finish you need.
-
2
Preproduction specification review
Our factory team checks the details and flags anything still open.
-
3
Sample approval
You review the buckle sample against the agreed specification.
-
4
Production
The approved configuration goes into production at our factory.
-
5
Shipping and payment review
We go over shipping and payment terms with you for your order.
What to specify for your quotation
Our catalog page 16 describes the 3 in nominal ratchet buckle family as a galvanized steel family with handle variants, and purchase request form page 5 lists HR750700 at 6 pieces/carton. To quote your buckle, tell us the slot and mandrel geometry, the handle style, the material grade and finish you require, and any documentation you need for the component. A buckle figure never rates a finished strap, and the strap's webbing, stitching and end fittings are specified separately. If you already hold a drawing or photo, Send Inquiry and we will review it with you.
Component packing
Packing for loose buckles depends on the purchase unit, finish and any labeling you request. The purchase request form lists HR750700 at 6 pieces/carton; packaging for your configuration is agreed in the quotation rather than assumed from other products.
Matching accessories
Catalog page 16 also shows a second ratchet buckle variant. It is a catalog reference, not an accessory that is automatically included. If your buckle will be paired with other hardware or labeled for private label, tell us which items you want considered.
Buckle resources
- W — slot width (in)
- L — body length (in)
- H — handle clearance (in)
Specification sketch
A loose ratchet buckle shown as a simplified frame, spool and raised handle. No strap assembly or hooks are drawn. Use it as a checklist when you describe the component you need.
Buyer specification fields
- Webbing slot width (in)
- Body length and frame thickness (in)
- Handle type and opening clearance (in)
- Spool/attachment interface
- Material grade and finish
- Component-specific documented load/test scope and pack quantity
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). Confirmed DEWIN nominal dimensions and reference codes stay in the existing product cards unchanged; this sketch does not confirm any additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
Have your own configuration drawing? Attach it when you request a quote and we review it against your webbing and the component you describe.
Third-party reference: US Cargo Control specification reference. Competitor values are not DEWIN specifications.
Third-party component drawing: Ratchet Spec Sheet. For the referenced third-party item only; not a DEWIN production drawing.
Factory process footage
Our factory process footage shows how we work in Vietnam: webbing looms, sewing and assembly. It is process context only and is not a performance test of any buckle or SKU. If you would like to see footage relevant to your build, mention it when you send your inquiry.
Component catalog
Catalog page 16 lists the ratchet buckle family for 3 in nominal webbing, in a galvanized steel family with handle variants. The purchase request form lists HR750700 at 6 pieces/carton. Tell us the configuration you want to quote and we respond with the details for it.
Why send your buckle brief to our factory
What you can count on is a clear review process: we ask for the right component details, keep documents tied to named models, and confirm terms in your quote.
Component-first review
We treat the buckle as its own part and ask for its own details, not a strap's.
Webbing fit questions
We confirm the nominal width, thickness and slot geometry before talking about a quote.
Documents tied to models
Photos, drawings and test notes are shown only when matched to a named model.
Terms confirmed in your quote
Terms, quantities and timing are confirmed in your quote, never assumed from this page.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
3-inch ratchet buckle questions
What is the lead time for 3-inch ratchet buckles?
Lead time depends on the buckle configuration, quantity and our current factory schedule. Send your webbing width and thickness, slot geometry, handle type, material grade, finish and quantity, and we confirm timing in your quote. We do not publish a fixed lead time for this category.
Can I get a sample after I place an order?
Sample sequence and terms are set per request. Tell us which buckle configuration you want sampled and whether you need approval before or after a purchase order, and we confirm the order of steps in writing with your quote.
How long does shipping take?
Shipping time depends on your U.S. destination, the purchase unit, packing and the carrier arrangement. Share those details with your inquiry and we confirm shipping terms with the actual quote.
How will I know the status of my order?
Our factory team replies to you directly with updates on the milestones agreed in your quote. When you inquire, tell us which updates matter most for your buckle order and we include them in the plan.
Can I request samples of a 3-inch ratchet buckle?
You can ask. Whether a sample is available, and its cost and conditions, depend on the configuration and are confirmed with your quote. We do not promise free samples. Include the webbing width and thickness, slot geometry, material grade and finish you want to evaluate.
Related articles
Three guides from our factory team help you compare webbing materials, choose anchor hardware and prepare a purchasing brief before you send your buckle requirement.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you decide which webbing your buckle and strap build should run with.
Tie-Down Hook and Ring Selection
A guide to the anchor interfaces a tie-down assembly connects to, and how to choose between them.
U.S. Tie-Down Strap Specification Worksheet
A worksheet to help you prepare a purchasing brief before you contact our factory team.
Ready to describe your buckle requirement? Send Inquiry