Catalog family reference; configuration is specified with your quotation
4-Inch Ratchet Buckles
We review your ratchet buckle brief before we quote: the webbing the buckle must accept, the slot opening, handle, material grade and finish. Send what you have. Partial details are welcome.
Component inquiries only. A buckle is a part, not a finished strap.
Start With the Buckle, Not the Strap
Dewin Technology Company Limited is the factory in Vietnam behind this inquiry page. For 4 in webbing buckles, the sourcing decision is whether the opening geometry, material grade and finish suit your webbing and your sample plan. We review those points one drawing at a time before any quote.
Buckle Configuration Selection
Before we match a 4 in buckle, confirm the nominal webbing width it must accept, the slot or mandrel opening geometry, the handle configuration, the material grade, the surface finish, the webbing thickness, and which component-specific drawing or documentation applies. Share what you know and we will review the rest. A buckle is a component only; it does not rate a finished strap.

Catalog family reference A — 4 in nominal ratchet buckle
Intended webbing fit: 4 in nominal. Catalog page 16 lists a galvanized steel buckle family with handle variants.
The photo explains the family and is not matched to a single model code. Slot geometry, handle, material grade and finish are specified with your quotation.

Catalog family reference B — 4 in nominal ratchet buckle
Intended webbing fit: 4 in nominal. A second catalog page 16 view of the same buckle family, shown for reference rather than as a model drawing.
Tell us the handle style and finish you need and we will confirm the configuration in your quote.
Quoted finished strap — 4 in x 30 ft ratchet strap
A separate finished assembly, not a loose buckle. Our factory quotation lists a 4 in x 30 ft ratchet strap in yellow polyester webbing with a steel ratchet buckle and a custom logo, packed 4 pieces per carton.
This configuration is independent of the buckle references on this page. Current order availability is confirmed at inquiry.
Match the Opening to Your Webbing
The "4-inch" in the name refers to the webbing the buckle is meant to accept, not the outside size of the buckle body. The slot or mandrel opening, together with your webbing thickness, decides whether the strap seats and feeds correctly. Send the opening drawing or your webbing details and we will review the fit. The structural sketch under Buckle Resources below shows which dimensions to specify.


Confirm Grade, Finish and Handle
Before you approve a sample, we want the material grade, the surface finish and the handle configuration written down against a drawing or a model reference. Any strength figure should name the buckle part and how it was tested. It never rates a finished strap.
Send Inquiry
Tell our factory team about the 4 in webbing buckle you need. In the message, mention the slot or opening, handle, material grade, finish, webbing thickness and any part drawings.
From Brief to Shipment
- 1
Requirements and design
You share the webbing fit, drawings and any marking needs.
- 2
Preproduction specification review
Our factory team checks opening, grade, finish and handle details with you.
- 3
Sample approval
You approve the sample against the written specification.
- 4
Production
We produce to the approved specification.
- 5
Shipping and payment review
Packing, freight terms and payment terms are confirmed with your quote.
What to Specify for Your Quotation
Page 16 of the DEWIN catalog documents a 4 in nominal ratchet buckle family in galvanized steel with handle variants. To quote the right buckle for your order, we ask you to describe it in the inquiry form.
- The nominal webbing width and thickness the buckle must accept
- The slot or opening dimensions in in, or your own drawing
- The handle style and surface finish you prefer
- The material grade and any documentation you need for your U.S. market
- Quantity, packing preference and any private-label marking
A strength value or photo for a buckle describes that component only, and only when it is tied to a named model, drawing or test object. It does not rate a finished strap, whose performance also depends on webbing, stitching and end fittings. To see finished assemblies, browse ratchet straps or the custom tie-down straps page, or Send Inquiry for the buckle itself.
Packaging and Accessories
Loose Buckle Packing
Tell us how you receive buckles today, such as bagged, boxed or counted by the carton. Packaging is agreed in the quotation, and we confirm packing and purchase units for this component with your quote.

Related Components and Accessories
The loose ratchet buckle shown is a catalog page 16 reference. It is a separately reviewed companion part, not an accessory that is automatically included with another item. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities and compatibility are confirmed in the quotation for your configuration.
Buckle Resources



Specification sketch
A generic loose ratchet buckle: frame, spool and raised handle, shown in simplified side and top views. No strap and no hooks are drawn.
- W — clear webbing slot width (in), measured between the inner edges of the slot in the top view, not the outside frame width
- L — body length (in)
- H — handle clearance (in)
Buyer specification fields
- Webbing slot width (in)
- Body length and frame thickness (in)
- Handle type and opening clearance (in)
- Spool/attachment interface
- Material grade and finish
- Component-specific documented load/test scope and pack quantity
Lengths of finished long straps and rolls use documented whole ft; local component and short-end dimensions use in. Confirmed DEWIN nominal dimensions and reference codes remain in the existing product cards unchanged. This sketch does not confirm additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This schematic explains which dimensions matter. When you request a quote, attach your own configuration drawing and we review it against your specification.
Third-party references
- Third-party reference — US Cargo Control specification reference
- Third-party component drawing — Ratchet Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing. Competitor values are not DEWIN specifications.
Have your own drawing? Send it with your inquiry and we will review it.

Factory Process Footage
Our process video shows hardware and strap work at our own factory in Vietnam. It illustrates how we work. It is not a performance test of any buckle model and does not establish a load rating. Mention in your inquiry if you want footage relevant to your brief.

Hardware Catalog
Catalog page 16 describes a 4 in nominal ratchet buckle family in galvanized steel with handle variants. Photos in the family explain the range and are not matched to individual model codes.
Tell us the buckle configuration you need and we will confirm the matching catalog reference with your quotation.
Why Send Your Buckle Brief to Our Factory
Our factory in Vietnam works from your drawings and written specification, so each question about a buckle gets answered against documents rather than assumptions.
Component-First Review
We treat the buckle as its own part and keep finished-strap questions separate.
Drawing-Based Fit Check
Your opening drawing and webbing thickness are checked before a quote is prepared.
Grade and Finish Up Front
Material grade and surface finish are written into the specification, not left open.
Clear Document Limits
Any document we share names the part and the test object it covers.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Buckle Inquiry FAQ
What is the lead time for 4 in webbing buckles?
Lead time depends on the buckle configuration, quantity and any marking. We do not publish a fixed figure. Send your specification and we will confirm timing with your quote.
Can a sample follow an order?
Sample approval is a step in our workflow before production. Whether the sample comes before or after an order is agreed in your quote, based on the buckle details you send.
How long does shipping take?
Shipping time depends on packing, ship method and your U.S. destination. Freight terms and timing are confirmed with the actual quote.
How do I follow my order status?
We do not offer an online order portal. Your factory contact shares status updates through the channel you used for your inquiry.
Can I request samples before ordering?
You can ask. Include the nominal webbing width, opening details, handle, grade and finish you need. Sample availability, cost and terms are confirmed with the quote, and we do not promise free samples.
Related Buckle Guides
Three guides for preparing a U.S. tie-down hardware and webbing brief. You can also see our ratchet straps, the custom tie-down straps page, the blog or the contact page.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you decide which webbing suits your application.
November 15, 2026
Tie-Down Hook and Ring Selection
How to choose the anchor interface: hook and ring types for your tie-down setup.
November 15, 2026
U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare your purchasing brief before you contact our factory.
November 15, 2026