D-Rings for Webbing
We review the internal webbing width, ring shape, wire diameter and seam detail with you before we quote a D-ring. Send a drawing or a photo, and we will build the quote around your configuration.
Choose the ring around the webbing
Sourcing a D-ring for webbing starts with the webbing it must work with: internal width, ring shape, wire diameter or section, seam detail and finish all have to agree. We compare these points with your drawing before quoting, so the part is never confused with a weld-on frame anchor or a lifting fitting.
Select a D-ring configuration
Three catalog families cover D-rings for webbing. Pick the construction closest to your need, then send the drawing, a sample photo or a catalog reference. We confirm the internal webbing width, ring shape, wire diameter or section, material and finish in your quotation. The images are catalog family references, not exact model photos.

D-Ring for Webbing — Welded Family
Catalog family reference, hook catalog p. 4
A closed ring with a joined seam, used with webbing. Carbon steel and stainless steel are family options; the material and finish for your order are set in the quotation.

D-Ring for Webbing — Snap Family
Catalog family reference, hook catalog p. 4
A different construction from the welded ring. Share the opening size and the webbing it will connect to, and we confirm the configuration with your quotation.

D-Ring Strap — Construction Reference
Finished strap reference, catalog p. 17 — an assembly, not a loose ring
Shows how a D-ring is carried on webbing. For a finished strap, tell us the webbing width in inches, the strap length in feet and the rating documentation you need.
Closed welded ring, open seam or slotted?
The first decision is ring construction. A welded closed ring has a joined seam, an open construction leaves the seam unjoined, and a slotted design adds a slot for the webbing to pass. Which suits you depends on your drawing and webbing width. Here, a welded seam describes how the ring is formed; it is not a weld-on anchor for a frame. The structural sketch in the D-ring resources section below shows where each ring dimension is measured.



Check wire section and finish before sample approval
Second, confirm the wire diameter or section, material and surface finish against the webbing width and how the ring will be sewn or threaded. When the sample arrives, compare internal width, opening shape, seam appearance and finish with your drawing. Finished strap assemblies are covered on our ratchet straps page, and private-label requests on custom tie-down straps.
Send Inquiry
Tell our factory team in Vietnam which D-ring you need. Partial information is fine; a drawing or photo helps.
How your D-ring inquiry moves
- 1
Requirements and design
You share the webbing width, ring shape, section, finish and quantity.
- 2
Preproduction specification review
We check your drawing or photo against the ring details in writing.
- 3
Sample approval
You compare the sample with the agreed specification before release.
- 4
Production
The approved specification guides the order at our factory.
- 5
Shipping and payment review
Terms and documents are confirmed with your quote.
What to specify for your quotation
A D-ring is a component, so a photo or catalog image shows the family and the construction, while your drawing sets the details. Our catalogs show the welded D-ring and the snap D-ring (hook catalog p. 4) and a D-ring finished strap (catalog p. 17). Carbon steel and stainless steel are listed as family options. To quote your configuration, tell us:
- The ring construction: welded, formed or snap
- Inside webbing width, inside height or opening, and wire diameter or plate thickness, all in inches (in)
- Material and surface finish you require
- For a finished strap: webbing width in inches, length in feet (ft) and end fittings
- Any strength or document requirements, which apply to a tested finished assembly and not to a ring picture
- Quantity, packing and your U.S. destination
Send Inquiry with your drawing, and we will compare it point by point.
Packing for loose D-rings
Tell us how loose rings should be counted, bagged and cartoned, and whether labels need your branding. Packaging is agreed in the quotation for your specific ring and order.

Snap D-ring as a companion part
The hook catalog (p. 4) lists a snap D-ring, which has a different construction from the welded ring. It is a separately reviewed companion part and is not automatically included with a ring order. If you want one sewn onto webbing, share the webbing, stitching and label needs. That is a finished assembly and is reviewed separately from the loose part. The image is a catalog family reference, not an exact model photo.
D-ring resources



Specification sketch
A simple D-shaped closed ring: a straight bar and a rounded arc, with no weld-on bracket. This original graphic only shows where each dimension is measured.
- W — inside width, in inches (in)
- H — inside height or opening, in inches (in)
- D — wire diameter, in inches (in)
Buyer specification fields
- Inside webbing width (in)
- Inside height/opening (in)
- Wire diameter or plate thickness (in)
- Welded/formed/snap construction
- Material grade and finish
- Component-specific test evidence
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). This sketch does not confirm additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This schematic explains how a ring is measured. When you request a quote, attach your own configuration drawing and we will review it against your requirements.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party component drawing: D-Ring Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing. Competitor values are not DEWIN specifications.
Factory process video
Our factory footage in Vietnam shows webbing looms and yarn racks, strap sewing and assembly, and a tensile-test machine. It illustrates how our factory works. It is process footage, not a performance test of any D-ring, strap or other specific model, and it does not state a rating. Ask for it in your inquiry, and we will point you to the right clip.

Catalog references
The DEWIN hook catalog (p. 4) shows the welded D-ring and the snap D-ring, two different constructions. Catalog p. 17 shows a D-ring finished strap. Carbon steel and stainless steel are family options. If you hold a catalog reference, include it in your inquiry and we will match it to a ring configuration for your quotation.
Why send your D-ring brief to our factory
Our process is a documented review of your ring details, not a list of unverified claims. Here is what happens to your request.
Specification first
We list internal width, ring shape, section, seam and finish before any quote.
Drawings and photos welcome
Attach what you have, and partial information is enough to start.
Component kept separate
A loose ring and a finished strap assembly are reviewed as different items.
Terms in your quote
Quantity, packing, timing and documents are confirmed for your actual order.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. Planning a private-label ring or strap set? Send Inquiry.
D-ring FAQ
What is the lead time for D-rings?
Lead time depends on the ring specification, finish, quantity and packing. Send your webbing width, ring shape, section and quantity, and we confirm timing in the actual quote.
Can I get a sample after placing an order?
Sample approval is part of our workflow before production. Whether and how a sample for your ring is arranged is confirmed with your quote and order details.
How long does shipping take?
Shipping time depends on destination, volume and freight terms. Tell us your U.S. destination and quantity, and we confirm shipping details in your quote.
How do I check my order status?
There is no online order portal on this page. Ask our factory team about your order through the contact details you gave in your inquiry, and include the ring specification you agreed.
Do you provide samples?
Samples can be discussed once we know the ring details you need. We do not promise free samples; availability and terms are confirmed with the quote. A drawing or photo helps us match the specification.
Related D-ring articles
Three guides from our factory team on webbing materials, anchor interfaces and preparing a purchasing brief. Browse the blog for current posts.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing that the ring will work with.
November 15, 2026
Tie-Down Hook and Ring Selection
A guide to the anchor interfaces that hooks and rings connect to.
November 15, 2026
U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing your purchasing brief before you send an inquiry.
November 15, 2026