Catalog family reference; configuration is specified with your quotation
Dewin Technology Company Limited · Factory in Vietnam
Stainless Steel D-Rings for Webbing
We help U.S. distributors, private-label brands and hardware wholesalers define stainless D-ring configurations for webbing connections. Tell us the internal width, section, seam, grade and finish you need, and our factory team reviews the details before we quote.
A webbing connection, not a lifting ring
We treat a stainless D-ring as a connection part that has to suit the webbing, the mating hardware and the intended duty. Cargo restraint and overhead lifting are separate applications, so this page does not present any ring as a lifting component. Share the webbing it will carry, the opening you need, the section, the seam type, the grade and the finish, and we confirm what can be built before any quote.
Choose a D-ring configuration
Start with six points: the webbing width the ring must pass through, internal width and opening in inches, section (wire diameter or plate thickness), whether the ring is seamless or has a welded seam, the stainless grade and surface finish you require, and how the ring attaches to a strap or fitting. Page 4 of the DEWIN hook catalog lists carbon steel and stainless options for the D-ring families shown below. Tell us the grade and documents you need, and we confirm what can be supplied for your configuration.
Welded D-ring family
Catalog family reference from page 4 of the DEWIN hook catalog. Opening, section, seam, grade and finish are specified with your quotation.
Snap D-ring construction
A separate construction shown in the DEWIN hook catalog. We review it as a companion part for your connection, with the configuration agreed in the quotation.
Your own D-ring specification
Have a drawing, sample or reference code? Send the inside width and opening in inches, section, seam type, grade and finish, and our factory team checks the configuration before quoting.
Match the ring opening to the webbing
The first decision is the internal width and opening of the ring against the webbing that has to pass through it. If the opening is too tight, the webbing bunches; if it is too loose, the ring can shift sideways. Give us the webbing width in inches and the section (wire diameter or plate thickness) you expect, and we check the pairing before we quote. The structural sketch in the Drawings tab under Resources shows the width, height and wire-diameter fields to send.
Check seam, grade and finish before sampling
The second decision is how the ring is made and finished. Confirm whether the ring is seamless or has a welded seam, where that seam sits relative to the webbing, and which stainless grade and surface finish you intend. The catalog lists carbon steel and stainless options for D-ring families. State the grade you require and any document you need, and we review them with you before a sample is made. For branded or special orders, see custom tie-down straps.
Send us your D-ring brief
Partial information is fine. Name, email and phone are required so our factory team can reply.
How an order moves
Five steps from brief to shipment. Timing and terms are confirmed in the quote for your configuration.
-
Requirements and design
You share the application, opening, section and any drawing or photo.
-
Preproduction specification review
Our factory team checks seam, grade, finish and fit with the webbing.
-
Sample approval
You review the sample against the agreed specification before production.
-
Production
The order is built to the approved specification.
-
Shipping and payment review
Shipping method and payment terms are reviewed and confirmed with you.
What to specify for your quotation
A stainless D-ring is a component, not a finished ratchet tie-down strap, so a ring's material does not describe the strap it is sewn into. Page 4 of the DEWIN hook catalog lists carbon steel and stainless options for the D-ring families, and this page shows a welded D-ring family and a separate snap D-ring construction from it. To quote your ring, tell us: the inside webbing width and opening in inches, the section (wire diameter or plate thickness), welded, formed or snap construction, the stainless grade and surface finish you require, the end configuration or mating hardware, quantity and destination, and any document you need for the finished configuration. Attach your own drawing or photo if you have one, and we confirm what can be supported in the quotation. Send Inquiry
Packaging and accessories
Packing for loose rings
Inner pack, carton and labeling for rings supplied as components are agreed in the quotation for your order. Our company-level packing, such as carton and polybag packing, is shown as general context and is not a box count for a specific ring. Tell us your quantity and labeling needs and we confirm the packing with the quote.
Rings with webbing or accessories
The DEWIN hook catalog also shows a separate snap D-ring construction. It is a companion part we review for your connection and is not automatically included with a ring order. If rings ship with webbing or other parts, packing is agreed for that combination in the quotation.
Resources


- W — inside webbing width, in
- H — inside height/opening, in
- D — wire diameter or plate thickness, in
Specification sketch
A simple closed D-shaped ring: a straight bar on one side and a rounded arc on the other, with no weld-on bracket. Use it to plan the fields you send us. It is an explanatory sketch only and shows no anchor point or rating.
Buyer specification fields
- Inside webbing width (in)
- Inside height/opening (in)
- Wire diameter or plate thickness (in)
- Welded/formed/snap construction
- Material grade and finish
- Component-specific test evidence
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). This sketch does not set any supply size; dimensions are confirmed in your quotation.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This original generic schematic explains the geometry only. If you already have a drawing of your own configuration, attach it when you send your inquiry and we review it with your quotation.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party component drawing: D-Ring Spec Sheet For the referenced third-party item only; not a DEWIN production drawing.
Third-party values are not DEWIN specifications, and none of their ratings or dimensions are copied into our product specifications.
Factory process video
Our Vietnam factory runs its own webbing looms, strap sewing and assembly, and a tensile-test machine. Ask our factory team for process footage when you send your inquiry. Process video shows factory operations; it is not a performance test of a specific ring, and it does not set a rating or certification for any D-ring configuration.

Catalog family references
Page 4 of the DEWIN hook catalog lists carbon steel and stainless options for D-ring families, including the welded D-ring family shown here and a separate snap D-ring construction. Tell us which family and configuration you need, and we confirm the details in your quotation.
Why send your brief to our factory team
Our process is built around clear details and documents. It does not rely on claims we cannot show.
One brief, one team
Your ring requirements go to the factory team in Vietnam, not through a chain of unrelated contacts.
Specification before quote
Opening, section, seam, grade and finish are reviewed first, so the quote matches what you described.
Documents tied to the ring
Drawings and photos are tied to one named ring. Material and rating documents are not applied across different rings.
A sample step you control
You compare the sample with the agreed specification before production is released.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. If you want to discuss a private-label D-ring order, Send Inquiry.
Questions before you inquire
What is the lead time for stainless D-rings?
Lead time depends on the ring configuration, quantity and finish. Send the width or opening in inches, the section, seam type and quantity, and the lead time is confirmed in your actual quote.
Can I order a sample after placing an order?
Sample steps are reviewed per inquiry. Tell us the ring specification and how you plan to order, and we confirm whether a sample stage fits your order in the quote.
How long does shipping take?
Shipping time depends on the destination, the shipping method and the order size. We confirm the route and terms in your quote after reviewing your order details.
How will I know the status of my order?
Our factory team keeps you updated by direct reply. Include your order details and preferred contact in your inquiry. We do not offer an online order portal.
Can I get samples of a stainless D-ring?
Samples are discussed per configuration. Send your specification and any drawing, and the sample terms, including whether a sample is free or paid, are confirmed with your quote.
D-ring guides
Three guides to read before you write your brief. You can also browse the blog for current articles.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing your ring will carry.
November 15, 2026
Tie-Down Hook and Ring Selection
A guide to anchor interfaces and how hooks and rings connect to a strap.
November 15, 2026
U.S. Tie-Down Strap Specification Worksheet
A worksheet to help you prepare a purchasing brief before you inquire.
November 15, 2026