Dewin Technology Company Limited
Wire Buckles from Our Factory in Vietnam
We review wire buckle requests from U.S. distributors, private-label buyers and sourcing teams. A wire buckle is a separate strapping component. Send the strap interface, wire diameter, opening and shape, material and finish, and purchasing unit, and we will check them against your drawing or photo.
Confirm the buckle before the quantity
A wire buckle is bought as a loose component, so the decision is whether its strap interface, wire diameter, opening and shape will work with the strapping you already use. We separate that component question from finished-strap questions, which keeps your quote tied to the part you actually need.
Wire buckle configuration selection
Before choosing a reference, check six items: the strap or webbing interface the buckle must accept, the wire diameter, the opening size and shape, the material grade, the surface finish, and the purchasing unit. We review these fields against your drawing or photo before any quote.
Two steel buckle references come from our purchase request form (p. 6). Two nominal families come from our hardware catalog (p. 17). Each is an independent starting point for your inquiry.
Reference BKL380300 — steel buckle fitting
- Packing: 200 pieces/carton (purchase request form p. 6)
- Wire diameter, opening and finish are specified in your quotation
Reference BKL500300 — steel buckle fitting
- Packing: 100 pieces/carton (purchase request form p. 6)
- Wire diameter, opening and finish are specified in your quotation
Catalog family — nominal 1.5 in galvanized steel
- Shown on hardware catalog p. 17
- Wire diameter, opening and purchasing unit are specified in your quotation
Catalog family — nominal 2 in galvanized steel
- Shown on hardware catalog p. 17
- Wire diameter, opening and purchasing unit are specified in your quotation
Match the strap interface first
The most important decision is how the strapping passes through or around the buckle. The wire diameter, the opening and its shape decide whether your strap seats correctly, so we ask for a sample, a photo or a dimensioned drawing before we discuss any other option. The structural sketch in the Drawings tab below shows the dimensions to specify. Our custom strap page covers finished strap work.
Verify material and finish before sample approval
Once the shape fits, the second decision is the material grade and surface finish, together with the purchasing unit. Before you approve a sample, we check that the sample, the drawing and the written specification all describe the same part, and that any part metrics are reported against the object that was tested.
Send your wire buckle inquiry
Partial information is fine. Tell us what you have and our factory team will ask for the rest. You can also use our contact page.
How a wire buckle order moves
- 1
Requirements and design
You share the strap interface, drawing or sample photo and intended use.
- 2
Preproduction specification review
We check wire diameter, opening, shape, material, finish and purchasing unit together.
- 3
Sample approval
You confirm the sample against the written specification before production is released.
- 4
Production
Our factory in Vietnam produces to the approved specification.
- 5
Shipping and payment review
Shipping terms, packing and payment are reviewed against your confirmed quote.
What to specify for your quotation
Wire buckles are components, so any strength or hardness figure belongs to the part and the way it was tested; it is not a rating for a finished strap, which is a different product on our ratchet straps page.
Our hardware catalog (p. 17) shows nominal 1.5 in and 2 in galvanized steel wire buckle families, and our purchase request form (p. 6) lists steel buckle fittings BKL380300 (200 pieces/carton) and BKL500300 (100 pieces/carton). Cast fittings on the same form are separate parts and are not wire buckles, so they are not listed here.
To quote accurately, tell us the reference or family you want, the wire diameter, opening and shape (in), the strap or webbing width it must accept, the material grade and finish, the purchasing unit, and any documents or test scope you need. A drawing or sample photo helps. When you are ready, Send Inquiry and we will compare it with the part you need.
Component packing
Wire buckles are purchased as loose parts, so the purchasing unit, inner packing and carton labeling are agreed in the quotation. Known carton quantities for the two steel references are listed in the configuration cards above.
Related components and accessories
Catalog p. 17 illustration of a second wire buckle variant. It is a family reference, not exact part or model proof.
If your assembly needs a companion part alongside a wire buckle, such as a second buckle variant from the catalog, we review it as a separate item. It is not included automatically. Tell our factory team in Vietnam which related parts your U.S. order requires. Compatibility, quantities and any applicable rating are confirmed for the quoted configuration.
Wire buckle resources
Each tab shows its own resource type: catalog and factory photos, a structural sketch, factory process context and the catalog family references.



Specification sketch
- W (in):
- inside width between the two side rails.
- L (in):
- outer length of the buckle.
- D (in):
- wire diameter.
The sketch shows one continuous bent wire with two side rails and bent inner wire arms. It has no pressing lever or ratchet body.
Buyer specification fields
- Compatible webbing width and thickness (in)
- Inside width/outer length (in)
- Wire diameter (in)
- Wire grade and coating
- Component test scope and pack quantity
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). Confirmed DEWIN nominal dimensions and reference codes stay in the configuration cards unchanged; this sketch does not confirm any additional supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This original generic schematic explains the geometry to specify. It is not a signed drawing of an exact SKU. When you request a quote, attach your own configuration drawing and we review it with your inquiry.
Third-party references
- Third-party reference: US Cargo Control specification reference Competitor values are not DEWIN specifications. We have copied no ratings or exact dimensions into our product specs.
- Third-party component drawing: Cam Buckle Spec Sheet For the referenced third-party item only; not a DEWIN production drawing.
Factory process context
Our factory process footage shows how hardware and strapping are handled. It illustrates our process only. It is not a performance test of a specific wire buckle reference, material grade or finish.
If you want to see process context for your project, ask for it in your inquiry.
Hardware catalog
Catalog family and reference descriptions
- Nominal 1.5 in galvanized steel wire buckle family (catalog p. 17)
- Nominal 2 in galvanized steel wire buckle family (catalog p. 17)
- BKL380300 steel buckle fitting, 200 pieces/carton (purchase request form p. 6)
- BKL500300 steel buckle fitting, 100 pieces/carton (purchase request form p. 6)
To request current catalog references for the configuration you need, name the family or code in the inquiry form.
Why buyers send us the brief first
Our process is a document workflow, not a list of claims. Here is what we do with a wire buckle request.
Specification first
We read the strap interface, wire diameter, opening and shape together before discussing price.
Drawings and photos welcome
Send a sample photo or a dimensioned drawing and we map it to a component for your review.
Part data stays with the part
Component metrics are recorded with the tested object and never presented as a finished-strap rating.
Direct factory contact
Your questions go to the DEWIN factory team that reviews the specification.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Wire buckle FAQ
What is the lead time for wire buckles?
Lead time depends on the strap interface, material, finish and quantity. Send us your drawing or sample photo and order details, and we confirm timing in the quote for that configuration.
Can I get a sample after I place an order?
Sample steps are agreed per order. Tell us the wire diameter, opening and shape you need, and we describe the sample and approval step in the quote.
How long does shipping take?
Shipping time depends on destination, packing and freight terms. Give us your U.S. destination and purchasing unit, and we confirm shipping details with the quote.
How will I know the status of my order?
Our factory team keeps in touch with you by the contact details you provide in the inquiry. We do not offer an order portal at this time.
Do you offer samples of wire buckles?
Sample availability and terms are confirmed after we review your specification. Include the material, finish and quantity you want to evaluate, and we reply with the terms for that request.
Related articles
Three guides for wire buckle and strapping buyers. More pieces appear on our blog.
Guide
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing for your strapping brief.
Guide
Tie-Down Hook and Ring Selection
How to match hooks and rings to the anchor interfaces on your vehicles and loads.
Guide
U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing a complete purchasing brief before you request a quote.