DEWIN

Dewin Technology Company Limited

Wire Buckles from Our Factory in Vietnam

We review wire buckle requests from U.S. distributors, private-label buyers and sourcing teams. A wire buckle is a separate strapping component. Send the strap interface, wire diameter, opening and shape, material and finish, and purchasing unit, and we will check them against your drawing or photo.

Wire buckle family reference from page 17 of the DEWIN hardware catalog
Catalog family reference; configuration is specified with your quotation.

Confirm the buckle before the quantity

A wire buckle is bought as a loose component, so the decision is whether its strap interface, wire diameter, opening and shape will work with the strapping you already use. We separate that component question from finished-strap questions, which keeps your quote tied to the part you actually need.

Wire buckle configuration selection

Before choosing a reference, check six items: the strap or webbing interface the buckle must accept, the wire diameter, the opening size and shape, the material grade, the surface finish, and the purchasing unit. We review these fields against your drawing or photo before any quote.

Two steel buckle references come from our purchase request form (p. 6). Two nominal families come from our hardware catalog (p. 17). Each is an independent starting point for your inquiry.

Reference BKL380300 — steel buckle fitting

  • Packing: 200 pieces/carton (purchase request form p. 6)
  • Wire diameter, opening and finish are specified in your quotation

Reference BKL500300 — steel buckle fitting

  • Packing: 100 pieces/carton (purchase request form p. 6)
  • Wire diameter, opening and finish are specified in your quotation

Catalog family — nominal 1.5 in galvanized steel

  • Shown on hardware catalog p. 17
  • Wire diameter, opening and purchasing unit are specified in your quotation

Catalog family — nominal 2 in galvanized steel

  • Shown on hardware catalog p. 17
  • Wire diameter, opening and purchasing unit are specified in your quotation

Match the strap interface first

The most important decision is how the strapping passes through or around the buckle. The wire diameter, the opening and its shape decide whether your strap seats correctly, so we ask for a sample, a photo or a dimensioned drawing before we discuss any other option. The structural sketch in the Drawings tab below shows the dimensions to specify. Our custom strap page covers finished strap work.

Second wire buckle catalog variant from page 17 of the DEWIN hardware catalog
Catalog family reference; configuration is specified with your quotation.
Hardware workbench at the DEWIN factory in Vietnam
Our factory hardware workbench in Vietnam. Contextual photo only: it is not a sample of a specific buckle, material grade or finish.

Verify material and finish before sample approval

Once the shape fits, the second decision is the material grade and surface finish, together with the purchasing unit. Before you approve a sample, we check that the sample, the drawing and the written specification all describe the same part, and that any part metrics are reported against the object that was tested.

Send your wire buckle inquiry

Partial information is fine. Tell us what you have and our factory team will ask for the rest. You can also use our contact page.

Optional drawing or product photo. Maximum file size: 100 MB.

How a wire buckle order moves

  1. 1

    Requirements and design

    You share the strap interface, drawing or sample photo and intended use.

  2. 2

    Preproduction specification review

    We check wire diameter, opening, shape, material, finish and purchasing unit together.

  3. 3

    Sample approval

    You confirm the sample against the written specification before production is released.

  4. 4

    Production

    Our factory in Vietnam produces to the approved specification.

  5. 5

    Shipping and payment review

    Shipping terms, packing and payment are reviewed against your confirmed quote.

What to specify for your quotation

Wire buckles are components, so any strength or hardness figure belongs to the part and the way it was tested; it is not a rating for a finished strap, which is a different product on our ratchet straps page.

Our hardware catalog (p. 17) shows nominal 1.5 in and 2 in galvanized steel wire buckle families, and our purchase request form (p. 6) lists steel buckle fittings BKL380300 (200 pieces/carton) and BKL500300 (100 pieces/carton). Cast fittings on the same form are separate parts and are not wire buckles, so they are not listed here.

To quote accurately, tell us the reference or family you want, the wire diameter, opening and shape (in), the strap or webbing width it must accept, the material grade and finish, the purchasing unit, and any documents or test scope you need. A drawing or sample photo helps. When you are ready, Send Inquiry and we will compare it with the part you need.

Component packing

Wire buckles are purchased as loose parts, so the purchasing unit, inner packing and carton labeling are agreed in the quotation. Known carton quantities for the two steel references are listed in the configuration cards above.

Second wire buckle variant from page 17 of the DEWIN hardware catalog

Related components and accessories

Catalog p. 17 illustration of a second wire buckle variant. It is a family reference, not exact part or model proof.

If your assembly needs a companion part alongside a wire buckle, such as a second buckle variant from the catalog, we review it as a separate item. It is not included automatically. Tell our factory team in Vietnam which related parts your U.S. order requires. Compatibility, quantities and any applicable rating are confirmed for the quoted configuration.

Wire buckle resources

Each tab shows its own resource type: catalog and factory photos, a structural sketch, factory process context and the catalog family references.

Wire buckle family reference from page 17 of the DEWIN hardware catalog
Catalog p. 17 — wire buckle family reference (not an exact part)
Second wire buckle variant from page 17 of the DEWIN hardware catalog
Catalog p. 17 — second wire buckle variant (not an exact part)
Hardware workbench at the DEWIN factory in Vietnam
Our factory hardware workbench — contextual photo

Why buyers send us the brief first

Our process is a document workflow, not a list of claims. Here is what we do with a wire buckle request.

Specification first

We read the strap interface, wire diameter, opening and shape together before discussing price.

Drawings and photos welcome

Send a sample photo or a dimensioned drawing and we map it to a component for your review.

Part data stays with the part

Component metrics are recorded with the tested object and never presented as a finished-strap rating.

Direct factory contact

Your questions go to the DEWIN factory team that reviews the specification.

Customer brands

These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.

POLARIS branded strap from the DEWIN catalog
POLARIS
MULTIPRENS USA branded webbing print from the DEWIN catalog
MULTIPRENS USA
FLOYD branded webbing print from the DEWIN catalog
FLOYD
TITAN branded webbing print from the DEWIN catalog
TITAN
LocknLock branded wrist loop from the DEWIN catalog
LocknLock

Wire buckle FAQ

What is the lead time for wire buckles?

Lead time depends on the strap interface, material, finish and quantity. Send us your drawing or sample photo and order details, and we confirm timing in the quote for that configuration.

Can I get a sample after I place an order?

Sample steps are agreed per order. Tell us the wire diameter, opening and shape you need, and we describe the sample and approval step in the quote.

How long does shipping take?

Shipping time depends on destination, packing and freight terms. Give us your U.S. destination and purchasing unit, and we confirm shipping details with the quote.

How will I know the status of my order?

Our factory team keeps in touch with you by the contact details you provide in the inquiry. We do not offer an order portal at this time.

Do you offer samples of wire buckles?

Sample availability and terms are confirmed after we review your specification. Include the material, finish and quantity you want to evaluate, and we reply with the terms for that request.

Related articles

Three guides for wire buckle and strapping buyers. More pieces appear on our blog.