Reusable Pallet Wraps
At our factory, we review your pallet size, load shape, mesh layout and closure before quoting a restraint wrap. These wraps hold a palletized load in place. They are not lifting nets, fall-protection nets or stretch-film rolls.
Confirm the Job Before You Compare Wraps
The first sourcing decision is the purpose: a reusable pallet wrap restrains a stacked load on its pallet, while a lifting net, a fall-protection net and a stretch-film roll each serve a different job. If your request could mean more than one, our factory team confirms the intended use with you before any wrap is specified or quoted.
Select a Pallet Wrap Configuration
Page 16 of our catalog shows the pallet wrap family in PES + PVC, in green, black and blue, with customized sizes. Choose the color family that suits your program, then send the load details. The photos below are catalog family references. We confirm the exact size, mesh, attachment points and closure in your quotation.

Blue Pallet Wrap
PES + PVC family, customized sizes. Specify your pallet and load in the inquiry form and we configure the wrap in your quotation.

Green Pallet Wrap
PES + PVC family, customized sizes. Specify your pallet and load in the inquiry form and we configure the wrap in your quotation.

Black Pallet Wrap
PES + PVC family, customized sizes. Specify your pallet and load in the inquiry form and we configure the wrap in your quotation.
Start With the Restraint Structure
A pallet wrap only restrains well if its geometry matches the load. Tell us the pallet footprint, the stacked load height and how the load sits on the pallet, and we review how the perimeter, height and panels should be laid out. Give lengths and heights in inches and feet. The structural sketch in the Resources section below shows the dimensions we ask for.
Check Mesh, Attachment and Closure
Before a sample is approved, compare the mesh opening against the smallest item in the load, the position and count of attachment points, the closure mechanism and the material. We state each item on the drawing and label so the sample can be checked against it. For strap-based alternatives, see custom tie-down straps or ratchet straps.
Send Your Pallet Wrap Brief
Partial information is welcome. Describe the pallet and load, perimeter and height in inches and feet, mesh layout, attachment points, closure, quantity and destination.
How Your Inquiry Moves
Five steps from brief to shipment. Timing, cost and test scope are confirmed in your quote, not assumed here.
- 1
Requirements and design
You share the load, pallet and closure needs; we capture them on one sheet.
- 2
Preproduction specification review
Our factory checks geometry, mesh, attachment points, closure and material with you.
- 3
Sample approval
You check the sample against the agreed drawing and label.
- 4
Production
Production follows the approved specification and sample.
- 5
Shipping and payment review
Packing, freight terms and payment terms are reviewed with you before shipment.
What to Specify for Your Quotation
Dewin Technology Company Limited is the factory behind this page. Page 16 of our catalog describes the pallet wrap family as PES + PVC, in green, black and blue, with customized sizes. To quote your wrap, tell us the pallet footprint and load height in inches and feet, the panel and mesh layout, the attachment points and closure type, the material grade you need, your color, any label or logo, and any documents you require. A drawing or photo of your load helps. We confirm the final configuration with you in the quotation. Send Inquiry with whatever details you have and we will take it from there.
Packaging and Accessories
Packing and Labeling
Folding, bundling, carton or bag format, and the buyer label are agreed in the quotation. We confirm the packing method for your wrap with you and do not carry packing assumptions over from other products.

Closure and Attachment Parts
Our hardware catalog includes loose hooks and rings that can be reviewed as a companion part for a restraint assembly. They are not automatically included with a pallet wrap. We choose and list any supplied fitting on the drawing only after the load geometry is known. See tie-down hook and ring selection, or custom tie-down straps for a strap-based solution.
Pallet Wrap Resources
Catalog photos of the pallet wrap family, a structural sketch of the dimensions we ask for, and factory process information. Attach your own configuration drawing when you request a quote.



Wrap Assembly Drawings
The structural sketch below shows the dimensions we ask for: perimeter and height in inches and feet, panel and mesh layout, attachment points, closure and label position. When you request a quote, attach your own configuration drawing and we review it with you.
Specification sketch
Illustrative schematic — not to scale. Not an approved production drawing.
- W — panel width (in)
- H — panel height (in)
- O — closure overlap (in)
- Two horizontal bars — simple closure straps
- Small inset at the right — an unlabelled wrapped rectangular pallet load, shown for context only.
Buyer specification fields
- Panel width, height and overlap (in)
- Closure arrangement and attachment spacing (in)
- PES/PVC construction
- Pallet/load perimeter fit
- Color/marking and packing
- Any performance or reuse claim needs applicable evidence
Lengths of finished long straps and rolls use documented whole feet (ft); local component and short-end dimensions use inches (in). This sketch explains geometry only and does not confirm supply sizes.
We check the packing drawing and pallet-wrap sample against the carton label before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
If you already have a configuration drawing, attach it to your inquiry and we review it against your load.
References
Third-party reference
Third-party reference — US Cargo Control specification reference
Competitor values are not DEWIN specifications. No ratings or exact competitor dimensions are copied into our product specs.
Factory Process Footage
DEWIN's own Vietnam factory runs webbing looms, strap sewing and assembly, and a tensile-test machine. Process footage shows our equipment and working methods. It is not a performance test of a specific pallet wrap configuration and does not establish a rating. To ask which process clips relate to your project, use Send Inquiry.
Pallet Wrap Catalog Pages
Page 16 of the DEWIN catalog lists the pallet wrap family as PES + PVC in green, black and blue with customized sizes. For the configuration you need, use Send Inquiry and tell us your pallet, load and closure requirements. Our factory team confirms the specification with you.
Why Send Your Brief to Our Factory
A clear brief and a documented review do more for a pallet wrap than a catalog photo. This is how we handle yours.
Factory-Direct Review
Your brief goes to the factory team that would build the wrap, so questions about geometry and closure are answered at the source.
Specification Captured Early
We ask for perimeter, height, mesh layout, attachment points and closure up front, so the quote reflects your actual load.
Drawing and Photo Review
Send a sketch or a photo of the load. We match it to a drawing for your approval rather than guessing a model.
Terms Stated on the Quote
Quantity, packing, freight terms and timing are confirmed in writing with your actual quote.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. Planning a private-label wrap? Send Inquiry to discuss label placement and colors.
Pallet Wrap Questions
What is the lead time for a reusable pallet wrap?
Lead time depends on the wrap design, material and quantity. Send your pallet and load details, and we confirm timing with your actual quote rather than quoting a general number.
Can I see a sample after I place an order?
Sample approval is a step before production in our workflow. Whether a sample comes before or alongside the order, and on what terms, is confirmed in the quote once we know your specification.
How long does shipping take?
Shipping time depends on quantity, packing, destination and freight method. Include your U.S. destination in your inquiry, and we review freight terms and timing with you before shipment.
How will I know the status of my order?
We keep you informed using the contact details you provide with your inquiry. The format and timing of updates are agreed with the quote, and no online order portal is assumed.
What do I need to provide to request a sample?
Share the pallet footprint and load height in inches and feet, the mesh layout, attachment points, closure type and any label need. A drawing or photo helps. Sample availability and terms are confirmed in the quote.
Related Articles
Three buyer guides from our factory team. Browse the blog for more posts.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose webbing for your application.
November 15, 2026
Read article
Tie-Down Hook and Ring Selection
A guide to anchor interfaces and how hook and ring types differ.
November 15, 2026
Read article
U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing a purchasing brief before you contact our factory.
November 15, 2026
Read article