1.5 Inch Ratchet Straps
We review the handle, end fittings, nominal width and overall length of your ratchet tie-down strap before we quote it. Dewin Technology Company Limited works from your brief, drawing or photo.
The 1.5 in nominal ratchet strap family appears in our English catalog (pp12-13). Send your width, length, fittings and quantity, and our factory team will quote the configuration you need.
Settle the width before the hardware
A 1.5 in ratchet strap request usually starts as a middle-width idea, but the nominal width in inches decides which handle, end fitting and webbing the assembly can use. Tell us the application and the fittings you expect, and our factory team in Vietnam will check what can be matched before quoting.
Select a ratchet strap configuration
A ratchet buckle is a metal component. A ratchet tie-down strap is the finished assembly. The cards below list the catalog reference codes and pack counts we have on record for the 1.5 in nominal family. Use this checklist to prepare your request:
- Handle and end fittings
- Fixed short end and movable long end
- Complete-assembly model
- Nominal width in inches
- Overall length in whole feet
- Rating or document requirements
- Label and carton packing
The 1.5 in nominal ratchet strap family is supported by our English catalog (pp12-13). Pack counts come from our purchase request form (p1). Overall length, fittings and labeling are set in your quotation.
Reference RJ38015003
- Nominal width:
- 1.5 in family (catalog pp12-13)
- Catalog pack count:
- 45 sets/carton (purchase request form p1)
Reference RJ38015005
- Nominal width:
- 1.5 in family (catalog pp12-13)
- Catalog pack count:
- 40 sets/carton (purchase request form p1)
Reference RJ38015006
- Nominal width:
- 1.5 in family (catalog pp12-13)
- Catalog pack count:
- 35 sets/carton (purchase request form p1)
Reference RJ38015008
- Nominal width:
- 1.5 in family (catalog pp12-13)
- Catalog pack count:
- 30 sets/carton (purchase request form p1)
Reference RJ38015010
- Nominal width:
- 1.5 in family (catalog pp12-13)
- Catalog pack count:
- 30 sets/carton (purchase request form p1)
Width and handle must agree
A 1.5 in request sits between 1 in and 2 in assemblies, so we do not assume which ratchet handle and webbing combination fits. Our English catalog (pp12-13) supports a 1.5 in nominal ratchet strap family. The overall length in whole feet, the handle and the end fittings are agreed with our factory team in your quotation. The structural sketch in the Resources section below shows where each dimension sits. If your plan is flexible, compare the ratchet strap family or our custom tie-down straps.
Check length and ends before samples
Before you approve a sample, we confirm the overall length in whole feet, which end is the fixed short end and which is the movable long end, and that the hooks or end fittings match the drawing. We also confirm the assembly label wording.
Send Inquiry
Share what you know. Partial information is fine: application, assembly or component, nominal width in inches, length in feet, end fittings, quantity and destination.
How an order moves forward
- 1
Requirements and design
You send the application, drawing or photo and the fields you can confirm.
- 2
Preproduction specification review
We check width, length, fittings and label details against what can be documented.
- 3
Sample approval
You review the sample against the agreed specification before the order proceeds.
- 4
Production
Our factory in Vietnam builds to the approved sample and specification.
- 5
Shipping and payment review
Shipping and payment terms are reviewed with you and set out in the quote.
What to specify for your quotation
A ratchet buckle rating describes a metal component, while the working load of a ratchet tie-down strap belongs to the complete assembly, including webbing, stitching and hooks. To quote the strap you need, tell us the nominal width in inches, the overall length in whole feet, the handle and end fittings, the webbing material and color, and the label and carton packing. If you need a working load, breaking strength or supporting document, name it in your inquiry and state the finished configuration and market it must cover. You can also quote one of the catalog reference codes listed above, or attach your own drawing or photo. Send Inquiry with whatever you have and our factory team will confirm the rest with you.
Packaging references
Branded carton packing
Real TITAN branded cartons from our factory in Vietnam. This is a company-level packing example, not a statement of the box count for a specific model. Catalog pack counts for the recorded references are listed above, and the bag or carton format for your order is agreed in the quotation.
Related components and accessories
Loose parts, hooks or webbing that go with a ratchet strap can be reviewed by our factory team in Vietnam as a separate companion item. They are not an automatically included accessory. The photo shows real factory strap samples. Items, quantities and compatibility are agreed in your quotation.
Resources




- W — nominal webbing width (in)
- L — overall assembly length (whole ft)
- S — fixed short-end length (in)
- Left and right outlines — end fittings. Center housing — ratchet body.
Specification sketch
Use these fields to describe a complete open-ended ratchet tie-down strap in your brief:
- Nominal webbing width (in)
- Overall assembly length (whole ft)
- Fixed short-end length (in)
- End fitting type and interface (in)
- Ratchet/cam style and handle clearance
- Material, color, marking and pack quantity
- Documented finished-assembly WLL (lb) and assembly break strength (lb), separately from raw-webbing strength
Lengths of finished long straps and rolls use documented whole ft. Local component and short-end dimensions use in. Confirmed DEWIN nominal dimensions and reference codes stay in the product cards above, unchanged. This sketch does not confirm additional supply sizes.
We check the assembly drawing, label and sample for the finished strap before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
An original generic schematic is provided here. If you have your own configuration drawing, attach it when you request a quote and our factory team will review it with your quotation.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party reference: Elohim 4 in × 30 ft product reference
Third-party values are not DEWIN specifications. No competitor ratings or dimensions are copied into our product specifications.
Videos
Strap sewing. This is a production-process video for the strap and webbing family. It is not a performance test of an exact SKU, a 1.5 in model or a rated assembly.
Catalog
Our English catalog (pp12-13) lists the 1.5 in nominal ratchet strap family. Our purchase request form (p1) records these catalog references: RJ38015003, RJ38015005, RJ38015006, RJ38015008 and RJ38015010, with pack counts shown in the selection cards above.
Tell us which reference or configuration you need and our factory team will confirm what can be quoted.
Why send the brief to our factory
Our process is a straightforward inquiry and document workflow. We work from your specification and tell you what is confirmed.
Factory-first review
The factory team in Vietnam reads your brief before any quote is prepared.
Specification fields up front
We ask for width in inches, length in feet, ends and fittings so nothing is guessed.
Component and assembly kept apart
A buckle rating is never presented as a finished strap rating.
Documents tied to the configuration
Any rating or test statement must cover the named finished build.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. If you want to discuss a private-label project, Send Inquiry.
Questions before you inquire
What is the lead time for 1.5 in ratchet straps?
We do not publish a fixed lead time. After you send the width, length, fittings and quantity, we confirm timing in the actual quote.
Can I request a sample after I place an order?
Yes, you can ask. Sample terms, cost and approval steps depend on the configuration and are stated in your quote. We do not promise free samples.
How long does shipping take?
Shipping time depends on the destination, quantity and freight terms. We review these with you and put the agreed terms in the quote.
How will I know the status of my order?
We arrange order updates with you when the order is confirmed. Tell us what you need to see at each stage when you send your inquiry.
Can I get samples before ordering?
You can request one by describing the assembly you need, including width in inches, length in feet and end fittings. We confirm whether it can be sampled and on what terms.
Related articles
Send InquiryThree guides for buyers specifying ratchet straps. Browse the blog for current posts.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing for a strap order.
Tie-Down Hook and Ring Selection
A guide to anchor interfaces and how hook and ring choices affect an assembly.
U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare your purchasing brief before you request a quote.