Dewin Technology Company Limited · Factory in Vietnam
Ratchet Straps With Wire Hooks
At our factory, we review wire hook shape and anchor-point interface before quoting a complete ratchet tie-down strap. J-hook requests are handled here too. Send us your application, nominal width in inches and overall length in whole feet, and our team will check the configuration with you.
Catalog family reference; configuration is specified with your quotation.
Start With the Hook and the Anchor Point
A wire hook only works if it fits the anchor it will meet. Before we quote a ratchet strap with wire hooks, our factory team asks what the hook will attach to, so the hook shape, strap and ratchet buckle are matched as one complete assembly rather than as separate parts.
Choose a Wire Hook Configuration
Start from the catalog family and the quoted sizes below. Current availability of any configuration is confirmed at inquiry. Use this checklist to prepare your request:
- Wire hook shape and the anchor interface it must fit
- Complete assembly or loose component
- Nominal webbing width in inches (in)
- Overall length in whole feet (ft)
- Fixed short end and running long end layout
- End fittings on each end
- Assembly working load limit in lb and breaking value, with label evidence
- Label and carton packing requirements
Need the broader family first? See ratchet straps or custom tie-down straps.
Yellow wire-hook ratchet strap family
Catalog page 22 shows the yellow wire-hook ratchet strap construction. Catalog family reference; the exact configuration is specified with your quotation.
Quoted configuration — 4 in x 30 ft
Nominal width 4 in, overall length 30 ft. Yellow polyester webbing, steel ratchet buckle, steel hooks, custom logo available. Packed 4 pieces per carton in the quotation.
This is a quoted configuration, independent of any catalog reference code. Hook shape and load documentation are confirmed with your quotation.
Quoted configuration — 2 in x 30 ft
Nominal width 2 in, overall length 30 ft. Yellow polyester webbing, steel ratchet buckle, steel hooks, custom logo available. Packed 10 pieces per carton in the quotation.
This is a quoted configuration, independent of any catalog reference code. Hook shape and load documentation are confirmed with your quotation.
Match the Hook to the Anchor
The first decision is the anchor your strap will meet: a rail, a cargo-bar slot, a flat plate edge or a round bar. Tell us which, and we compare wire hook shapes against it. We also confirm whether you need the complete strap, with webbing sewn to the hook end and the ratchet buckle fitted, or the hook only as a component.
The structural sketch in the Resources section shows where width, overall length and the fixed short end are measured. Exact dimensions are agreed in your quotation.
Verify Before Sample Approval
Before you approve a sample, check the points that decide how the strap works in the field: nominal width in inches, overall length in whole feet, which end is the fixed short end, the running long end, and what the label states for the complete assembly. A rating belongs to the finished strap, not to the hook alone.
Send Your Wire Hook Strap Brief
Partial information is fine. Tell us the application, assembly or component, nominal width (in), length (ft), end fittings, quantity and destination.
How an Order Moves
-
1
Requirements and design
You share the application, anchor interface and any drawings or photos.
-
2
Preproduction specification review
Our factory team checks hook, width, length, fittings and labeling with you.
-
3
Sample approval
You review the sample against the agreed specification before production.
-
4
Production
The approved configuration is produced in Vietnam.
-
5
Shipping and payment review
Shipping and payment terms are confirmed with your quote.
What to Specify for Your Quotation
A wire hook shape is not a model, and a hook figure is not an assembly rating, so we quote the finished strap from your brief. Please tell us the anchor interface and hook shape, whether you need a complete strap or a loose hook, the nominal width in inches and the overall length in whole feet. Add the fixed short end and running long end layout, the end fittings on each end, the webbing material and color, and any marking or packing requirements. If you need a working load limit or breaking value on the label, tell us which document requirements apply to your U.S. order. Our factory team keeps catalog references, customer requirements and tested values separate, and confirms each item for the quoted configuration. Attach your own drawing or photo if you have one. Send Inquiry with what you have, and we will ask for anything else we need.
Polybag Packing
A bagged option for private-label orders, with your label or insert. Tell us how you want each strap packed and how many go in a carton; packaging is agreed in the quotation.
Related components and accessories
The catalog reference above shows a loose double-J hook component family. It is a separately reviewed companion part, not an accessory included automatically with a strap. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities and compatibility are confirmed for the quoted configuration, along with accessory specifications and any applicable rating for that item.
Catalog reference image; part, size and compatibility are specified with your quotation.
Resources
Specification sketch
- W (in)
- Nominal webbing width, in inches.
- L (whole ft)
- Overall assembly length, in whole feet.
- S (in)
- Fixed short-end length, in inches.
Both end fittings are shown as double-J wire hook outlines. The parts in the sketch are not proportioned and the sketch shows no threading or operating steps.
Buyer specification fields
- Nominal webbing width (in)
- Overall assembly length (whole ft)
- Fixed short-end length (in)
- End fitting type and interface (in)
- Ratchet/cam style and handle clearance
- Material, color, marking and pack quantity
- Documented finished-assembly WLL (lb) and assembly break strength (lb), separately from raw-webbing strength
Lengths of finished long straps and rolls use documented whole ft; local component and short-end dimensions use in. This sketch does not confirm additional supply sizes.
We check the assembly drawing, label and sample for the finished strap before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration. You can attach your own configuration drawing when you request a quote.
Third-party references
-
Third-party reference
US Cargo Control specification reference -
Third-party reference
Elohim 4 in × 30 ft product reference
Third-party values are not DEWIN specifications. No competitor ratings or dimensions are copied into our product specs.
An original generic schematic is provided here. Your configuration is specified in the quotation.
Factory and Product Videos
Real strap sewing. This is a production-process reference for strap and webbing work, not a demonstration of one exact SKU, hook fit or load rating.
Factory sewing process reference — not a SKU performance test
Catalog References
Below is the catalog illustration of the yellow wire-hook ratchet strap construction, shown with the catalog family descriptions for this page. Tell us which configuration you need through the inquiry form, and we will confirm the catalog references that apply to it.
- Yellow wire-hook ratchet strap. A finished ratchet tie-down strap assembly with wire hooks, shown on catalog page 22.
- Loose double-J hook component family. A separate hook component reference, handled apart from the finished strap.
Why Work Through Our Factory Team
Our process is built around questions and documents, so your wire hook strap is specified before it is quoted.
Specification first
We ask for hook shape, anchor, width and length before quoting a configuration.
Assembly or component
A finished strap and a loose hook are handled as separate requests with separate documents.
Photos matched to models
An image is paired with a model only after the drawing and specification agree.
Ratings need evidence
Load figures are stated only when documents cover the named complete assembly.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Wire Hook Strap Questions
What is the lead time for ratchet straps with wire hooks?
Lead time depends on the configuration, quantity and packing. Send your hook shape, nominal width in inches, length in whole feet and quantity, and we confirm timing with your actual quote.
Can I get a sample after I place an order?
Sample approval is a step before production in our workflow. Tell us what you want to approve, and we explain how the sample fits your order terms in the quote.
How long does shipping take?
Shipping time depends on your destination, shipping method and packing. Give us your U.S. delivery location and we confirm freight terms and timing with the quote.
How can I check the status of my order?
Contact our factory team with your order details and we reply with its current stage. Please send the quote or reference you were given so we can find it quickly.
Can I request samples before ordering?
You can request one. Share the exact configuration and application, and we confirm whether a sample is available and on what terms. Free samples are not promised.
Related Articles
Three guides for buyers comparing wire hook styles and preparing a purchasing brief. Browse the blog for more posts.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing for your strap before you specify it.
Guide ·
Tie-Down Hook and Ring Selection
How the anchor interface decides which hook or ring fits your application.
Guide ·
U.S. Tie-Down Strap Specification Worksheet
A worksheet to help you prepare a purchasing brief with width, length, fittings and quantity.
Worksheet ·
Prefer to talk it through? Contact our factory team or return to the home page.