DEWIN

Double J Hooks

DEWIN is a factory in Vietnam supplying double J hooks for webbing assemblies to U.S. distributors, private-label brands and wholesale buyers. Send a drawing or sample photo with the wire diameter, hook opening, webbing attachment opening, geometry and finish you need, and our factory team will go through the details with you.

Individual double J hook illustration from the DEWIN hook catalog
Catalog family reference; configuration is specified with your quotation

Source the Hook, Not Just the Picture

A double J hook is one part of a webbing assembly, so the sourcing decision starts with fit: wire diameter, hook opening and webbing attachment opening must agree with each other and with your webbing. We review those details from your drawing or sample photo first, then confirm the finish and which documents can support the named hook.

Choose a Double J Hook Configuration

Before comparing double J hooks, confirm the webbing slot, hook opening, wire diameter or plate thickness, connection direction, weld or closure details if a drawing shows them, and the material and surface finish. We review these points against your drawing or sample photo before any assembly is discussed. Our catalog shows J-hook families in nominal 1 in, 1.5 in, 2 in, 3 in and 4 in sizes, and our purchase form lists five hook references with their carton quantities. Name the reference or family you need in your inquiry, and your specification is confirmed in the quotation.

J-hook second family reference from the DEWIN hook catalog

Catalog family reference; configuration is specified with your quotation.

J-Hook Families, Catalog p. 16

Nominal 1 in, 1.5 in, 2 in, 3 in and 4 in families

Double J Hook, HJ250045

Purchase form reference HJ250045 — 500 pieces per carton

Double J Hook, HJ380150

Purchase form reference HJ380150 — 200 pieces per carton

Double J Hook, HJ500300

Purchase form reference HJ500300 — 120 pieces per carton

Double J Hook, HJ500500

Purchase form reference HJ500500 — 100 pieces per carton

Double J Hook, HJ750700

Purchase form reference HJ750700 — 40 pieces per carton

Match Wire Diameter to Hook Opening

The wire diameter sets how heavy the hook looks and how it seats on its mating hardware, while the hook opening decides what it can actually grab. Give us both, plus the hook shape you are copying, and our factory team can tell you which details still need a drawing or a sample before a build is discussed. The Drawings tab in the resources section below shows where W, G and D are measured on a double J hook.

For private-label packing and branding questions, see our custom tie-down strap options.

Third J-hook family reference from the DEWIN hook catalog
Catalog family reference showing hook shape. Wire diameter and opening are specified with your quotation.
J-hook family reference image from the DEWIN hook catalog, page 16
J-hook family reference from the DEWIN catalog, p. 16. It shows the hook construction family. It is not a dimension drawing, a grade certificate or proof of an exact part.

Check the Webbing Opening and Finish

Before sample approval, compare the webbing attachment opening and connection direction with the webbing you plan to use, and confirm the material and surface finish in writing. Compatibility and component strength are confirmed against the named hook in your quotation, so we ask you to approve the sample against the drawing rather than a photo alone.

Looking for a finished assembly instead of bare hardware? See our ratchet straps.

Send Your Double J Hook Brief

Tell us the wire diameter, hook opening, webbing attachment opening, geometry and finish you need. Partial information is fine.

Optional drawing or product photo. Maximum file size: 100 MB.

How an Inquiry Moves Forward

Timing, costs and terms are confirmed in your quote.

  1. Requirements and design

    You send the hook details, drawing or photo.

  2. Preproduction specification review

    Our factory team checks dimensions, material and finish with you.

  3. Sample approval

    You compare the sample with the agreed drawing.

  4. Production

    The approved configuration goes into production at our factory.

  5. Shipping and payment review

    Packing, shipping terms and payment are reviewed before release.

What to Specify for Your Quotation

A bare double J hook is a component, and a component picture says little about how it will perform inside a finished webbing assembly. To quote the right hook, tell us the catalog family or purchase-form reference you have in mind (HJ250045, HJ380150, HJ500300, HJ500500 or HJ750700), or send your own drawing or sample photo.

  • Nominal size or family in inches (in), such as 1 in, 1.5 in, 2 in, 3 in or 4 in
  • Wire diameter, hook opening and webbing attachment opening
  • End configuration and connection direction
  • Material grade, surface finish and any coating requirement
  • Quantity, destination and packing preference
  • Any load marking or document you need for the complete assembly

Any load statement must come from documents that cover the complete assembly. When you Send Inquiry, our factory team confirms each item for your quoted configuration.

Hook Packaging and Accessories

Bagged or Boxed Hardware

Carton quantities for the five purchase-form references are listed in the configuration section above. Inner packing for loose hooks is agreed in the quotation, based on hook size, finish and quantity. Branded packing, such as printed cartons or polybags, can be discussed for private-label orders.

Third J-hook family reference image from the DEWIN hook catalog

Catalog family reference for a companion hook part. It does not identify an exact part or model.

Related Components and Accessories

A related companion part, such as another hook from the catalog family, is reviewed separately and is not automatically included with a double J hook order. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities, compatibility and accessory specifications are confirmed in the quotation.

Double J Hook Resources

Why Send Your Hook Brief to Our Factory

A clear, document-based review keeps hook details from being lost between your drawing and the finished part.

Drawing-First Review

Send a dimensioned drawing or sample photo and we review the hook geometry before any build is discussed.

One Brief, Every Detail

Wire diameter, hook opening, webbing attachment opening and finish go into a single inquiry.

Evidence Stays Specific

Strength and compatibility statements are limited to documents that match the named hook.

Direct Factory Contact

Your inquiry goes straight to our factory team in Vietnam, who reply with any questions about your brief.

Customer Brands

These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.

POLARIS branded strap from the DEWIN catalog
POLARIS
MULTIPRENS USA printed webbing from the DEWIN catalog
MULTIPRENS USA
FLOYD printed webbing from the DEWIN catalog
FLOYD
TITAN printed webbing from the DEWIN catalog
TITAN
LocknLock wrist loop from the DEWIN catalog
LocknLock

Double J Hook FAQ

What is the lead time for double J hooks?

Lead time depends on the hook configuration, finish and quantity. Send your drawing or sample photo, and we will confirm timing in the quote for your specific order rather than quoting a fixed number here.

Can a sample be arranged after I place an order?

Sample approval is a step in our workflow. Whether a sample comes before or after the order, and on what terms, is confirmed in your quote once we know the hook specification.

How long does shipping take?

Shipping time depends on destination, quantity, packing and freight terms. Include your delivery location in the inquiry, and the quote will state the shipping terms for that order.

How do I check the status of my order?

Order updates are handled directly with our factory team through the contact route confirmed in your quote. Refer to your hook specification and order details when you ask.

Can I request samples of a specific double J hook?

Yes, you can ask. Include the wire diameter, hook opening, webbing attachment opening, geometry and finish, with a drawing or photo if you have one. Sample availability, cost and terms are confirmed with the quote.

Related Reading

Three guides on webbing materials, hook and ring selection, and preparing a purchasing brief. Browse our blog for more posts.