Double J Hooks
DEWIN is a factory in Vietnam supplying double J hooks for webbing assemblies to U.S. distributors, private-label brands and wholesale buyers. Send a drawing or sample photo with the wire diameter, hook opening, webbing attachment opening, geometry and finish you need, and our factory team will go through the details with you.
Source the Hook, Not Just the Picture
A double J hook is one part of a webbing assembly, so the sourcing decision starts with fit: wire diameter, hook opening and webbing attachment opening must agree with each other and with your webbing. We review those details from your drawing or sample photo first, then confirm the finish and which documents can support the named hook.
Choose a Double J Hook Configuration
Before comparing double J hooks, confirm the webbing slot, hook opening, wire diameter or plate thickness, connection direction, weld or closure details if a drawing shows them, and the material and surface finish. We review these points against your drawing or sample photo before any assembly is discussed. Our catalog shows J-hook families in nominal 1 in, 1.5 in, 2 in, 3 in and 4 in sizes, and our purchase form lists five hook references with their carton quantities. Name the reference or family you need in your inquiry, and your specification is confirmed in the quotation.
Catalog family reference; configuration is specified with your quotation.
J-Hook Families, Catalog p. 16
Nominal 1 in, 1.5 in, 2 in, 3 in and 4 in families
Double J Hook, HJ250045
Purchase form reference HJ250045 — 500 pieces per carton
Double J Hook, HJ380150
Purchase form reference HJ380150 — 200 pieces per carton
Double J Hook, HJ500300
Purchase form reference HJ500300 — 120 pieces per carton
Double J Hook, HJ500500
Purchase form reference HJ500500 — 100 pieces per carton
Double J Hook, HJ750700
Purchase form reference HJ750700 — 40 pieces per carton
Match Wire Diameter to Hook Opening
The wire diameter sets how heavy the hook looks and how it seats on its mating hardware, while the hook opening decides what it can actually grab. Give us both, plus the hook shape you are copying, and our factory team can tell you which details still need a drawing or a sample before a build is discussed. The Drawings tab in the resources section below shows where W, G and D are measured on a double J hook.
For private-label packing and branding questions, see our custom tie-down strap options.
Check the Webbing Opening and Finish
Before sample approval, compare the webbing attachment opening and connection direction with the webbing you plan to use, and confirm the material and surface finish in writing. Compatibility and component strength are confirmed against the named hook in your quotation, so we ask you to approve the sample against the drawing rather than a photo alone.
Looking for a finished assembly instead of bare hardware? See our ratchet straps.
Send Your Double J Hook Brief
Tell us the wire diameter, hook opening, webbing attachment opening, geometry and finish you need. Partial information is fine.
How an Inquiry Moves Forward
Timing, costs and terms are confirmed in your quote.
-
Requirements and design
You send the hook details, drawing or photo.
-
Preproduction specification review
Our factory team checks dimensions, material and finish with you.
-
Sample approval
You compare the sample with the agreed drawing.
-
Production
The approved configuration goes into production at our factory.
-
Shipping and payment review
Packing, shipping terms and payment are reviewed before release.
What to Specify for Your Quotation
A bare double J hook is a component, and a component picture says little about how it will perform inside a finished webbing assembly. To quote the right hook, tell us the catalog family or purchase-form reference you have in mind (HJ250045, HJ380150, HJ500300, HJ500500 or HJ750700), or send your own drawing or sample photo.
- Nominal size or family in inches (in), such as 1 in, 1.5 in, 2 in, 3 in or 4 in
- Wire diameter, hook opening and webbing attachment opening
- End configuration and connection direction
- Material grade, surface finish and any coating requirement
- Quantity, destination and packing preference
- Any load marking or document you need for the complete assembly
Any load statement must come from documents that cover the complete assembly. When you Send Inquiry, our factory team confirms each item for your quoted configuration.
Hook Packaging and Accessories
Bagged or Boxed Hardware
Carton quantities for the five purchase-form references are listed in the configuration section above. Inner packing for loose hooks is agreed in the quotation, based on hook size, finish and quantity. Branded packing, such as printed cartons or polybags, can be discussed for private-label orders.
Catalog family reference for a companion hook part. It does not identify an exact part or model.
Related Components and Accessories
A related companion part, such as another hook from the catalog family, is reviewed separately and is not automatically included with a double J hook order. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities, compatibility and accessory specifications are confirmed in the quotation.
Double J Hook Resources
Catalog reference images. They show hook families and construction, and are not proof of an exact part.




- W (in) — webbing attachment loop width
- G (in) — hook opening / gate clearance
- D (in) — wire or body thickness
Specification sketch
Use this generic schematic to plan which dimensions to send us. It shows two parallel bent wire J prongs meeting a webbing attachment loop, in simple front and side outlines. It explains the geometry only and is not a signed drawing for an exact SKU.
Buyer specification fields
- Webbing interface or eye width (in)
- Overall length (in)
- Opening/gate clearance (in)
- Body or wire thickness (in)
- Material grade, finish or coating chemistry
- Component-specific load marking/test scope
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). Reference codes and carton quantities are listed in the configuration section above.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
You can attach your own configuration drawing when you request a quote, and our factory team reviews it with your inquiry.
Third-party references
- Third-party reference: US Cargo Control specification reference
- Third-party component drawing: Wire Hook Spec Sheet
For the referenced third-party item only; not a DEWIN production drawing. Competitor values are not DEWIN specifications.
If you already have a dimensioned drawing or a sample photo, attach it to your inquiry.
Factory Process Video
Our own Vietnam factory runs webbing looms, strap sewing and assembly, and a tensile-test machine. Ask our factory team for process footage when you send your inquiry. Process video shows factory operations only. It is not a performance test of any hook reference or a load rating.

Hardware Catalog Pages
Catalog p. 16 shows J-hook families in nominal 1 in, 1.5 in, 2 in, 3 in and 4 in sizes, alongside this individual double J hook illustration. Our purchase form lists five hook references: HJ250045, HJ380150, HJ500300, HJ500500 and HJ750700. Tell us which family or reference you need, and our factory team confirms the configuration in your quotation.
Why Send Your Hook Brief to Our Factory
A clear, document-based review keeps hook details from being lost between your drawing and the finished part.
Drawing-First Review
Send a dimensioned drawing or sample photo and we review the hook geometry before any build is discussed.
One Brief, Every Detail
Wire diameter, hook opening, webbing attachment opening and finish go into a single inquiry.
Evidence Stays Specific
Strength and compatibility statements are limited to documents that match the named hook.
Direct Factory Contact
Your inquiry goes straight to our factory team in Vietnam, who reply with any questions about your brief.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Double J Hook FAQ
What is the lead time for double J hooks?
Lead time depends on the hook configuration, finish and quantity. Send your drawing or sample photo, and we will confirm timing in the quote for your specific order rather than quoting a fixed number here.
Can a sample be arranged after I place an order?
Sample approval is a step in our workflow. Whether a sample comes before or after the order, and on what terms, is confirmed in your quote once we know the hook specification.
How long does shipping take?
Shipping time depends on destination, quantity, packing and freight terms. Include your delivery location in the inquiry, and the quote will state the shipping terms for that order.
How do I check the status of my order?
Order updates are handled directly with our factory team through the contact route confirmed in your quote. Refer to your hook specification and order details when you ask.
Can I request samples of a specific double J hook?
Yes, you can ask. Include the wire diameter, hook opening, webbing attachment opening, geometry and finish, with a drawing or photo if you have one. Sample availability, cost and terms are confirmed with the quote.
Related Reading
Three guides on webbing materials, hook and ring selection, and preparing a purchasing brief. Browse our blog for more posts.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing for a tie-down assembly.
Tie-Down Hook and Ring Selection
A guide to anchor interfaces and how hook and ring types connect to them.
U.S. Tie-Down Strap Specification Worksheet
A worksheet for preparing a purchasing brief before you contact our factory team.

