Dewin Technology Company Limited · Factory in Vietnam
Flat Hooks For Straps
We review flat hook drawings, contact faces and webbing slots with U.S. buyers before we quote. Send the drawing or sample you have, and we will confirm the bare hook configuration with you.
A bare hook is a drawing decision first
A flat hook is a bare steel end component. It is not a finished strap, and it is not a wall or hanging hook. The sourcing decision is whether your drawing, with its lip, inside slot and contact face, can be matched exactly, so we ask for those details before we discuss quantities or packing.
Choose a flat hook configuration
Before you send a brief, settle these points for the bare flat hook: the lip shape, the inside webbing slot, the contact face that bears on the load, the wire diameter or plate thickness, the connection direction to the strap, whether any closure latch or weld seam is specified, the material and surface finish, and the drawing that governs it all. Our factory team in Vietnam reviews each point with you before quoting.
Flat hook for 2 in webbing
Steel loose flat hook for nominal 2 in webbing, as listed in factory quotation O6019. The size refers to the nominal webbing, not a measured opening.
Slot, plate thickness or wire diameter, finish and pack quantity are confirmed in your quotation.
Flat hook for 3 in webbing
Steel loose flat hook for nominal 3 in webbing, as listed in factory quotation O6019. The size refers to the nominal webbing, not a measured opening.
Slot, plate thickness or wire diameter, finish and pack quantity are confirmed in your quotation.
Flat hook for 4 in webbing
Steel loose flat hook for nominal 4 in webbing, as listed in factory quotation O6019. The size refers to the nominal webbing, not a measured opening.
Slot, plate thickness or wire diameter, finish and pack quantity are confirmed in your quotation.
Match the contact face and lip to your anchor point
The hook lip and mouth opening decide what the hook can seat on, and the contact face decides where the load bears. Tell us what the hook will engage, such as a rail, a ring or a bracket, and give us the opening you need in inches. We check it against your drawing before we quote. The schematic under Flat hook resources → Drawings shows where the slot, depth, thickness and lip sit on the part.
Looking for finished assemblies instead? See our ratchet straps.
Check the webbing slot and plate before sample approval
The inside slot has to pass your webbing width, in inches, and the plate thickness or wire diameter has to suit that slot. Before you approve a sample, compare the slot, the connection direction and the finish against the approved drawing, and tell us if the hook will be sewn into a loop or fitted another way.
Need a complete custom build? See custom tie-down straps.
Send your flat hook brief
Partial information is fine. Add whatever you have on the lip, slot, plate thickness or wire diameter, finish and quantity, and our factory team will follow up on the rest.
How a flat hook order moves
- 1
Requirements and design
You share the drawing, sample or description of the hook you need.
- 2
Preproduction specification review
We check the lip, slot, contact face, thickness and finish against your drawing.
- 3
Sample approval
You compare the sample to the approved drawing before moving on.
- 4
Production
Our factory in Vietnam produces to the approved specification.
- 5
Shipping and payment review
We confirm shipping and payment terms with you for your order.
What to specify for your quotation
A flat hook is quoted as a component, separate from any finished strap. Our catalog references (DW hook catalog, p. 7, and product catalog, p. 17) show the flat hook family, and factory quotation O6019 lists steel loose flat hooks for nominal 2 in, 3 in and 4 in webbing. Those sizes refer to the nominal webbing, not a measured hook opening. To quote the hook you need, tell us the webbing width in inches, the slot and mouth opening, the plate thickness or wire diameter, the connection direction, the material and finish, and the quantity and destination. If you need a load marking, test report or other document, name it, along with the complete assembly it must cover, so we can confirm what applies to your configuration. Send Inquiry with your drawing or sample, and our factory team will reply with what we can supply.
Hook packing and accessories
Packing for loose hooks
Tell us how you want bare hooks packed, such as by count, bagged or boxed, and whether they need marking. Packaging is agreed in the quotation for your order.
Webbing and fittings to pair
A flat hook can be reviewed as a companion part for webbing or another fitting. It is not automatically included with any strap. If the hooks will be sewn to webbing or paired with other fittings, name them in your brief. We check the pairing against the hook slot before we propose anything.
Flat hook resources



Drawings
Specification sketch
- W — webbing slot width (in)
- H — slot depth (in)
- T — plate thickness (in)
- Lip — bent lip of the folded plate, side view
The sketch shows a folded flat metal plate with a wide webbing slot. It has no numerical dimensions, ratings or certifications, and it does not assign any model.
Buyer specification fields
- Webbing interface or eye width (in)
- Overall length (in)
- Opening/gate clearance (in)
- Body or wire thickness (in)
- Material grade, finish or coating chemistry
- Component-specific load marking/test scope
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). Our confirmed nominal dimensions and reference codes stay in the existing product cards unchanged; this sketch does not confirm additional supply sizes.
We check the assembly drawing, label and sample for the finished strap before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This schematic explains the geometry only. If you have your own configuration drawing, attach it when you request a quote and we will review it against your specification.
Third-party references
- Third-party reference US Cargo Control specification reference
- Third-party component drawing Spec Sheet For the referenced third-party item only; not a DEWIN production drawing.
Competitor values are not DEWIN specifications, and none of them are copied into our product specs.
Videos
Our factory process footage from Vietnam shows webbing looms and yarn racks, strap sewing and assembly, and a tensile-test machine. It illustrates how we work and is not a performance test of any flat hook, and the equipment shown does not establish a rating, certification or test result for a specific part.
If you want to see how your strap or hook project would be handled, mention it in your inquiry.
Catalog
These catalog pages show the flat hook family. Factory quotation O6019 lists steel loose flat hooks for nominal 2 in, 3 in and 4 in webbing. Tell us the configuration you need and our factory team will confirm it in your quotation.
Why send your flat hook brief to our factory
You get a clear, document-based review of a bare component. Here is how we work with your drawing.
Drawing-first review
We start from your drawing or sample and note what each dimension and feature requires.
Component, not assembly
We keep the bare hook separate from any finished strap so nothing is implied about the assembly.
Photo-to-model matching
An image is only tied to a hook once the drawing and specification have been matched.
Documents on request
We share supporting documents only where they cover the named configuration and your market.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. Send Inquiry to start your own flat hook project.
Flat hook questions
What is the lead time for flat hooks?
Lead time depends on the hook specification, finish and quantity. Send your drawing and order details, and we confirm timing in the actual quote.
Can I get a sample after I place an order?
Sample steps are agreed per project. Tell us the hook details you need to check, and we set out the sample approval step with the quote before production.
How long does shipping take?
Shipping time depends on the destination, quantity, packing and freight method. Give us your delivery location and we confirm the shipping terms with your quote.
How will I know the status of my order?
Our factory team keeps you informed directly, and we agree how and when we update you when the order is confirmed.
Can I request a sample flat hook before ordering?
You can ask. Share the lip, slot, plate thickness or wire diameter and finish you want, and we tell you what is possible and on what terms in the quote.
Buying guides for hooks and straps
Three guides help you prepare a flat hook brief: how webbing materials compare, how hook and ring types meet an anchor point, and how to fill in a U.S. tie-down strap specification.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing that will be paired with your hooks.
November 15, 2026 · Read article
Tie-Down Hook and Ring Selection
How hook and ring types fit different anchor interfaces, so you can match the fitting to the anchor point.
November 15, 2026 · Read article
U.S. Tie-Down Strap Specification Worksheet
A worksheet that walks you through preparing a purchasing brief before you contact our factory.
November 15, 2026 · Read article