S Hooks for Straps
We supply S hook components to U.S. distributors, private-label brands and hardware wholesalers. Tell us the opening at each end, wire diameter, finish and the webbing or anchor point the hook must fit, and our factory team will quote the configuration you need.
Source the hook, not the household look-alike
Many S hooks look alike in a photo, yet the opening, wire diameter and finish decide whether one fits your webbing or anchor point. Our Vietnam factory team treats the S hook as its own component and confirms those details with you before any configuration is named.
S hook selection checklist
We start an S hook review with the bare component, not a finished strap. Confirm the opening at each end, wire diameter, overall geometry, surface finish and how the hook meets the webbing or anchor point. Do not assume a gate or closed eye. Send what you have, and we will match it to a drawing or photo before your quotation is prepared.
Our catalog (p16) and hook catalog (pp5-6) show the S hook families below. Exact configuration, sizes in inches (in) and packing are specified with your quotation.
Steel S hook
Family shown on DEWIN catalog page 16. Tell us the opening, wire diameter, length and finish you need, and we will specify the configuration in your quotation.
Plastic-coated S hook
Family shown on DEWIN catalog page 16. Tell us the coating you need and what the hook will touch in use, and we will confirm the coating in your quotation.
Black S hook
Family shown in the DEWIN hook catalog, pages 5-6. Send your drawing or photo, and we will compare it with the hook family before we quote.
Match the openings to your webbing or anchor
The first decision is how each end opening relates to wire diameter and to the part it must engage. A hook that suits one webbing slot or anchor point may not suit another. Send the mating part, its dimensions in inches (in) and your quantity, and our factory team will compare them with the hook geometry. The sketch in the resources section shows where opening, length and core diameter are read. Finished assemblies are covered on our ratchet straps page.
Confirm finish and geometry before sample approval
The second decision is surface finish and bend geometry. Tell us whether you need a plain, plated or coated finish, and what the hook will touch in use. Before you approve a sample, check it against the agreed drawing: opening at each end, wire diameter, bend shape and finish at the curves. Hooks that will be sewn into custom straps are also reviewed on our custom tie-down straps page.
Tell us about your S hook
Partial details are welcome. Name, email and phone are required so our factory team can reply.
Prefer to start from the contact page? Go to Contact.
How an S hook order moves
-
1
Requirements and design
You share the hook details, mating part and any drawing or photo.
-
2
Preproduction specification review
Our factory team checks openings, wire diameter, geometry and finish with you.
-
3
Sample approval
Sample terms are agreed per request, then you approve against the drawing.
-
4
Production
Production follows the approved specification and packing instructions.
-
5
Shipping and payment review
Shipping and payment terms are reviewed against the written quote.
What to specify for your quotation
A bare S hook is a component, and the hook alone does not carry a rating for your finished assembly. Our catalog page 16 shows steel and plastic-coated S hook families, and our hook catalog pages 5-6 show S hook families, including a black S hook. To quote your hook, we ask you to specify the opening at each end, wire diameter, overall length and the webbing or anchor point it must fit, with dimensions in inches (in). Also tell us the material grade and finish or coating you need, any load marking or document requirements, your quantity and your U.S. destination. If you are unsure of a value, send a drawing or photo and we will work through it with you. Share your hook details through the form, or use this Send Inquiry link.
Packaging and accessories
Loose hook packing
Tell us whether you need bagged or bulk hooks and how they will be counted. Packaging is agreed in the quotation for your configuration and your U.S. destination.
Related components and accessories
The hook catalog shows a black S hook as a loose part. A companion part like this is reviewed separately and is not automatically included with another item. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities and compatibility are confirmed in the quotation for your configuration.
S hook resources



Drawings
Specification sketch
- G Opening/gate clearance at an end, in inches (in)
- L Overall hook length, in inches (in)
- D Core (body or wire) diameter, in inches (in)
Yellow arrows mark where each dimension is read. The sketch carries no numerical values.
Buyer specification fields
- Webbing interface or eye width (in)
- Overall length (in)
- Opening/gate clearance (in)
- Body or wire thickness (in)
- Material grade, finish or coating chemistry
- Component-specific load marking/test scope
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). This sketch explains where each dimension is read; it does not set a supply size.
We check the assembly drawing, label and sample for the finished strap before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
You can attach your own configuration drawing when you request a quote, and we will review it against your quotation.
References
Third-party reference: format reference only. Competitor values are not DEWIN specifications, and no ratings or dimensions from it are used in our product specs.
An original generic schematic is provided here. A matched production drawing is reviewed with the quotation.
Videos
Our process footage comes from DEWIN's own factory in Vietnam and shows webbing looms and yarn racks, strap sewing and assembly, and a tensile-test machine. It shows how we work. It is not a performance test of any S hook, and it does not establish a rated load or certification.
For your S hook, the opening, wire diameter, finish and any document requirements are confirmed in your quotation.
Catalog
- Catalog page 16: steel S hook and plastic-coated S hook families.
- Hook catalog pages 5-6: S hook family photos, including a black S hook.
Tell us which family matches your hook, and we will specify the configuration in your quotation.
Why send your S hook brief to our factory
Our process is a clear, document-based review: you send the details, we check them against a drawing or photo, and you see the result in writing before sample approval.
Component-first review
We separate the bare S hook from any strap assembly so each is judged on its own details.
Drawing and photo matching
Each hook is matched to a drawing or photo before a model is shown, not guessed from a family picture.
Interface and finish notes
Opening, wire diameter, geometry and finish are recorded together with the webbing or anchor they must fit.
Terms in writing
Quantity, packing, timing and shipping terms are confirmed in the quote for your configuration.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
S hook questions
What is the lead time for S hooks?
Lead time depends on the hook specification, finish and quantity. Send the opening, wire diameter, finish and quantity, and we will confirm timing in the quote for that configuration.
Can I get a sample after I place an order?
Sample arrangements are discussed per request. Tell us the hook details and the approval you need, and the sample terms will be stated in the quote.
How long does shipping take?
Shipping time depends on quantity, packing and destination in the United States. Include your destination in the inquiry, and the quote will set out the shipping terms.
How will I know the status of my order?
Our factory team keeps you updated by direct communication on the order you confirmed. Provide your order details so each update refers to the agreed S hook specification.
Can I request S hook samples?
You can request them. Describe the hook opening, wire diameter, finish and the webbing or anchor it must fit, and we will confirm whether and how a sample can be arranged.
Related S hook articles
Three guides from our factory team help you compare webbing materials, choose hook and ring interfaces, and prepare a purchasing brief.

Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose webbing for your strap order.

Tie-Down Hook and Ring Selection
A guide to anchor interfaces and how hooks and rings meet the load point.

U.S. Tie-Down Strap Specification Worksheet
A worksheet to help you prepare a purchasing brief before you send an inquiry.