Hardware components · Factory in Vietnam
Vinyl Coated S Hooks
We treat a vinyl coated S hook as a coated hook component, not a finished strap. The coating and the contact areas set different purchasing requirements than a bare-steel hook, so we review them with you before quoting for U.S. distributors, private-label and wholesale buyers.
Coated or Bare Steel Is a Sourcing Decision
A coated S hook and a bare-steel S hook are not interchangeable lines on a purchase order. Where the coating sits, which regions stay exposed and how the coating relates to the wire or plate dimension all change what we must match, so we ask for those details before any configuration is offered.
Vinyl Coated S Hook Selection
Before we quote a vinyl coated S hook, we compare eight points: the slot or throat, hook opening, wire diameter or plate thickness, connection direction, gate or weld closure, material and coated surface, and the model drawing. Those fields separate a coated component from a bare-steel one. Send what you have, and our factory team in Vietnam will list every field still to be confirmed with you.

Plastic-coated S hook
Catalog p. 16 family reference. Tell us the coating material you need, such as vinyl, and we confirm it with your quotation.

Black S-hook family
Catalog family reference for hook shape and finish. Dimensions and surface treatment are specified with your quotation.
Vinyl coating requirement review
Using the plastic-coated family as our starting point, we review your vinyl coating requirement with you: coating material, coated regions, exposed regions and whether dimensions are measured with or without the coating.
Start With the Coated Contact Areas
Tell us which part of the S hook touches the load or the mating fitting, and whether the coating should cover the whole body or only selected regions. We match that answer to a drawing before we discuss a configuration. The structural sketch in the resources section shows the opening, length and diameter fields to state.
Check the Hook Before Sample Approval
Before a sample is approved, compare it with the drawing: wire diameter or plate thickness, hook opening, slot, connection direction and closure. Tell us whether each dimension is measured with or without the coating, so both sides read the same number.
Pairing the hook with webbing? See our ratchet straps or custom tie-down straps.
Send Your Coated S Hook Brief
Partial information is fine. Include the hook shape, slot, opening, wire diameter or plate thickness, connection direction, closure, coating, quantity and destination if you know them.
How the Order Moves
-
Requirements and design
You share the hook brief, drawing or photo, and we list the fields still open.
-
Preproduction specification review
We review shape, dimensions and coating details with you before anything is built.
-
Sample approval
You compare the sample against the agreed drawing before the order proceeds.
-
Production
Our factory in Vietnam produces to the approved specification.
-
Shipping and payment review
We confirm shipping method, terms and payment details with you on the quote.
What to Specify for Your Quotation
Our catalog shows a plastic-coated S hook on page 16 and a black S-hook family, and they help us start the conversation about hook shape and finish. For a vinyl coated S hook, tell us the coating material you require, the base metal or grade if it matters to you, the opening, overall length and wire or plate thickness in inches, the connection direction and closure, and which regions should be coated or left exposed. If you need a load marking, test scope or supporting document, name it in your brief so we can review it for your exact configuration. This page covers the hook component only. To start, Send Inquiry with whatever you have.
Packing for Coated Hooks
Tell us how you want the hooks packed, labeled and cartoned. Packaging for coated parts is agreed in the quotation for your configuration.
Matching Hardware
If the S hook joins other hardware or webbing in your build, list those parts in the same inquiry. The DEWIN catalog does include loose webbing and other hardware, but each companion part is reviewed separately and added to a quote only after it is matched to your drawing.
Coated S Hook Resources
Each tab keeps its own resource type: catalog photos, a structural sketch, factory process footage and catalog references.


Specification sketch
- G (in) — hook opening / gate clearance.
- L (in) — overall hook length.
- D (in) — core wire or body diameter.
- Grey outer band — thin coating outline only; coating material is not specified by this sketch.
Buyer specification fields
- Webbing interface or eye width (in)
- Overall length (in)
- Opening/gate clearance (in)
- Body or wire thickness (in)
- Material grade, finish or coating chemistry
- Component-specific load marking/test scope
Lengths of finished long straps and rolls use documented whole feet (ft); local component and short-end dimensions use inches (in). This sketch explains the geometry only and does not set supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
You can attach your own configuration drawing when you request a quote; we review it against this sketch's fields and your coating requirement.
Third-party reference
Third-party reference: US Cargo Control specification reference
Used only to see how specification fields are commonly formatted. Its values are not DEWIN specifications, and none are copied here.
Factory process footage
We have footage from our own factory in Vietnam showing webbing looms and yarn racks, strap sewing and assembly, and a tensile-test machine. It is a factory process video: it shows how we work and is not a performance test of this coated hook or of any specific configuration.
Ask for the footage in your inquiry and our factory team will share it with your quotation.
Our hook catalog covers J hooks, S hooks, snap hooks, D rings and flat hooks, and page 16 shows the plastic-coated S hook family. Tell us which reference or configuration fits your brief, along with the coating material, opening, length and wire or plate thickness you need, and we will confirm the details in your quotation.
Why Buyers Start With a Specification Review
Our reasons are about how we handle your inquiry and documents, not about unproven performance.
Drawing-first review
We ask for the drawing or photo first, so quoting questions rest on your actual part.
Coating listed separately
Base metal, coated surface and exposed regions are recorded as separate fields.
Partial briefs welcome
Send what you know. We list the open fields instead of guessing at them.
Direct factory contact
Your questions go to our factory team in Vietnam, with terms confirmed on the quote.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Coated S Hook FAQ
What is the lead time for coated S hooks?
Lead time depends on the hook shape, coating specification and quantity, so we do not publish a fixed figure. Send your drawing or photo and quantity, and our factory team will confirm timing on the actual quote.
Can I get a sample after I place an order?
Sample approval is a step before production. Tell us in your inquiry whether you need a sample first, and we will confirm how it is handled, and on what terms, when we quote.
How long does shipping take?
Shipping time depends on quantity, packing, destination and freight method. Give us your U.S. destination and the quantity, and we will confirm the shipping method and timing on the quote.
How will I know the status of my order?
We agree on how status updates reach you when the order is quoted. For questions in the meantime, use the contact page and reference your inquiry.
Can I request samples of a vinyl coated S hook?
You can ask for one. Include the hook shape, dimensions and coating you need, plus a drawing if you have it. Whether a sample is offered, and its terms, are confirmed with the quote; we do not promise free samples.
Related Articles
Three guides for hardware and strap buyers, finalized for publication together on November 15, 2026. Read them before you prepare your brief.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose webbing for your strap brief.
Tie-Down Hook and Ring Selection
How anchor interfaces differ, and what to state when you choose a hook or ring.
U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare your purchasing brief before you send an inquiry.