S Hooks With Closed Eye
We review your closed-eye S hook drawing or photo before we discuss a quote. Tell us how the closed eye connects, how wide the hook mouth must open and what finish you need, and we will match it to a hardware configuration.
Closed Eye Or Open Mouth: Decide Which End Does What
On an S hook with a closed eye, one end is a sealed loop that a ring, webbing loop or fixed link passes through, and the other end is an open hook mouth that catches the load point. Sourcing starts by deciding which part of your assembly must pass through the eye and which must sit in the mouth, because that decides the dimensions our factory team needs from you.
Choose A Closed-Eye S Hook Configuration
Before choosing a closed-eye S hook, confirm five points: eye clearance, hook mouth opening, wire diameter or plate thickness, material and surface finish, and whether the mouth has a latch or welded closure. A closed eye is only the attachment end, not a gate. The DW hook catalog, p. 5, contains a labelled closed-eye S-hook example. Send a drawing or photo if you have one, and our factory team at our Vietnam factory will help match it to a configuration for your quotation.
Closed-Eye S Hook Family
Catalog family reference from the DW hook catalog, p. 5. One end is a sealed eye and the other is an open hook mouth. Eye clearance, mouth opening, wire diameter, material and finish are specified with your quotation.
Black S Hook Family
Black S-hook catalog reference. The two black S-hook photos show similar eye geometry, so the exact variant is confirmed against your drawing.
Your Drawing Or Sample
Already have a closed-eye hook in use? Send a drawing, photo or sample details and we will match the eye, mouth and wire to a configuration for your quotation.
Eye Clearance Sets What Can Pass Through
The closed eye is a fixed opening, so its clearance decides whether your ring, link or webbing loop fits through it. Tell us the part that must pass through the eye and the space it needs, and our factory team will compare that against the hook drawing before any configuration is suggested. The schematic in the resources section shows how the eye, opening and body are described.
Verify Mouth, Wire And Finish Before Sample Approval
Before you approve a sample, check that the open mouth fits your load point, that the wire diameter or plate thickness matches your drawing, and that the material and finish suit your environment. A closed eye does not close the mouth, so say whether you need a latch or welded closure.
Looking for a finished assembly instead of a hook? See our ratchet straps or custom tie-down straps.
Send Your Closed-Eye S Hook Brief
Share what you know. Partial details are welcome, and our factory team will follow up on the rest.
How Your Order Moves
Five steps from your brief to shipment. Timing and terms are confirmed in your quote.
- 1
Requirements And Design
You send the application, drawing or photo and the closed-eye hook details you know.
- 2
Preproduction Specification Review
Our factory team checks eye clearance, mouth opening, wire diameter, material and finish.
- 3
Sample Approval
You review the sample against the agreed drawing before production is released.
- 4
Production
The hooks are made to the approved specification and checked against it.
- 5
Shipping And Payment Review
We confirm shipping and payment arrangements with you for the quoted order.
What To Specify For Your Quotation
A closed-eye S hook is a component, not a finished strap or lifting assembly. To quote it accurately, our factory team asks for the details that define your hook: the eye clearance and the part that passes through it, the mouth opening, the overall length and the wire diameter or plate thickness in inches, the material grade and finish, and whether the mouth needs a latch or welded closure. If you need a load marking, test scope or supporting document, tell us which one and for which finished configuration, and we will confirm what can be documented for the quoted build. The closed eye describes the attachment end only; it does not make a hook suitable for overhead lifting. Send Inquiry with your drawing, photo or sample details and partial information is welcome.
Hook Packing Options
Tell us how you want closed-eye S hooks packed, such as bagged, boxed or bulk, and whether private-label marking is needed. Packaging is agreed in the quotation for your order.
Mating Parts And Accessories
The catalog reference above shows a loose closed-eye S hook. A companion part, such as a ring, link or webbing loop, is reviewed separately against the eye clearance and is not automatically included with the hook. Include that part in your drawing so we can check it, and we will confirm accessory options with your specification.
Closed-Eye S Hook Resources
Catalog family references, a specification schematic and process information to help you prepare your brief. You can attach your own configuration drawing when you request a quote.


Specification sketch
- G (in) — opening or gate clearance of the open end
- L (in) — overall length of the hook
- D (in) — core diameter of the wire or body
- E — closed eye, formed into a loop
- O — open hook end
Buyer Specification Fields
Use these fields to plan a closed-eye S hook brief. Fill in what you know; partial details are welcome.
- Webbing interface or eye width (in)
- Overall length (in)
- Opening/gate clearance (in)
- Body or wire thickness (in)
- Material grade, finish or coating chemistry
- Component-specific load marking/test scope
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). This sketch explains the geometry only and does not set supply sizes.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
An original generic schematic is provided here. You can attach your own configuration drawing when you request a quote, and the matched production drawing is reviewed with the quotation.
Third-party reference
Third-party reference: US Cargo Control specification reference
Shown to illustrate how other suppliers format specifications. Third-party values are not DEWIN specifications, and no ratings or dimensions from it are used in our product specs.
Factory Process
Our own factory in Vietnam runs webbing looms, strap sewing and assembly, and a tensile-test machine. Process footage shows how we work; it is not a performance test of a closed-eye S hook and does not establish a load rating for any hook configuration.
If you would like to see footage related to your brief, mention it in your inquiry together with your drawing or photo.
Hardware Catalog Reference
The DEWIN hardware catalog covers J hooks, S hooks, snap hooks, D rings and flat hooks. The closed-eye S hook on catalog p. 5 describes the hook family: a sealed eye on one end and an open mouth on the other. Tell us the configuration you need in the inquiry form and we will confirm it in your quotation.
Why Send Your Hook Brief To Our Factory
Our factory in Vietnam works from your drawing and specification, and each of the four points below describes a step in how we handle your brief.
Drawing First
We start from your drawing or sample rather than a generic hook description.
Eye And Mouth Checked Separately
Eye clearance and mouth opening are reviewed as two different dimensions.
Photos Matched To Models
An image is tied to a hook only after its dimensions are confirmed.
Terms In The Quote
Quantity, packing, documents and timing are confirmed in writing with your quote.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. If you would like to discuss a private-label hook, Send Inquiry.
Closed-Eye S Hook Questions
What is the lead time for closed-eye S hooks?
Lead time depends on the hook specification, finish and quantity. Send your drawing, quantity and destination, and we will confirm timing in your actual quote.
Can I see a sample after I place an order?
Sample approval is a step in our workflow before production. Whether a sample is made first, and on what terms, is confirmed in the quote for your specific hook.
How long does shipping take?
Shipping time depends on the order size, packing and destination. Tell us your delivery location and we will confirm the shipping arrangement with your quote.
How will I know the status of my order?
You will work directly with our factory team, who will update you on your order. Include your order or inquiry details when you write so we can find it quickly.
Can I request samples of closed-eye S hooks?
You can ask for samples through the inquiry form. Please include the eye clearance, mouth opening, wire diameter, material and finish you need. Sample availability and terms are confirmed in the quote.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you choose the webbing for a strap brief.
November 15, 2026
Tie-Down Hook and Ring Selection
A guide to the anchor interfaces your hook or ring must connect to.
November 15, 2026
U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare your purchasing brief before you send an inquiry.
November 15, 2026