Dewin Technology Company Limited — factory in Vietnam
Snap Hooks For Webbing
We review the webbing opening, gate clearance, gate and hinge geometry, and body material of each snap hook before we quote it. This page is for U.S. distributors, private-label buyers and sourcing teams who need to specify the hook as a component.
Specify the hook, not just the strap
We treat a snap hook for webbing as a component: the opening that takes the webbing, the gate clearance, the gate and hinge geometry, and the body material. A catalog photo alone does not identify a model, and a hook drawing is not a finished strap, so we ask for a drawing, a sample or a clear photo before we match a configuration.
Choose a snap hook configuration
Before comparing hooks, we ask for these details: the webbing slot the hook must accept, the hook opening and gate clearance, wire diameter or plate thickness, the connection direction at the fixed eye, and whether the gate or body has a weld seam. Add the base material and surface finish, then a drawing or photo of your current part. We review each answer against your drawing before quoting. The two families below come from page 3 of the DEWIN hook catalog; the exact configuration is specified with your quotation.

Steel gated snap hook
Catalog family reference — DEWIN hook catalog p. 3
The catalog lists carbon steel or stainless as material options for the steel family. Tell us the webbing slot, hook opening, wire or plate, connection direction, gate or weld detail, and finish you need, and we confirm the configuration in your quote.

Aluminum snap hook
Catalog family reference — DEWIN hook catalog p. 3
The aluminum family shown in the hook catalog. Tell us the webbing slot, hook opening, connection direction, gate or hinge detail and finish you need, and we confirm the configuration in your quote.
Your own hook specification
Already have a drawing, a sample or a photo of the hook you buy today? Send it with your quantity and U.S. destination, and our factory team in Vietnam will review it against what we can supply.
Webbing opening and gate clearance
The first decision is how the webbing meets the hook. We need the webbing slot or fixed eye the hook must work with, the hook opening that has to clear your mating part, and the gate clearance when the gate closes. Give widths and openings in inches from your drawing or sample; we do not estimate them from photos. The specification sketch in the Drawings tab of the resources section below shows where these dimensions are measured.
Need a complete strap instead of a hook alone? See ratchet straps or custom tie-down straps.


Gate, hinge, material and finish
The second decision is the body. Confirm the gate and hinge geometry, whether the gate or body carries a weld seam, the wire diameter or plate thickness, and the base material and surface finish. The catalog lists carbon steel and stainless as material options for the steel family; which one applies to your hook is confirmed per order. Before sample approval, compare the sample with the approved drawing for opening shape, gate action and finish. A drawing alone implies no rated use; any rating needs documentation for the named hook.
From your brief to shipment review
Partial information is fine. Send what you have and our factory team in Vietnam will ask for the rest. You can also use the contact page.
-
1
Requirements and design
You share the application, drawing or sample photo.
-
2
Preproduction specification review
We check opening, gate, body material and finish against your drawing.
-
3
Sample approval
You compare the sample with the approved specification.
-
4
Production
Production starts on the specification you approved.
-
5
Shipping and payment review
Shipping and payment terms are confirmed in your quote.
What to specify for your quotation
Page 3 of the DEWIN hook catalog shows a gated steel snap hook and an aluminum snap hook, and lists carbon steel and stainless as material options for the steel family. To quote the right hook, tell us the webbing slot or eye width, the overall length and hook opening in inches, the wire diameter or plate thickness, the connection direction, the material grade and finish you want, and the quantity and U.S. destination. If you need a load marking, test scope or other document, name it in your request, together with the hook it should cover. A hook is a component rather than a finished assembly, so any rating for a finished strap is quoted for the whole assembly. If you already hold a drawing or sample, Send Inquiry and we will match it to what we can supply.
Packing for loose snap hooks
Counts per bag or carton and any private-label marking depend on the hook and the order. Tell us how you resell or assemble the hooks, and packaging is agreed in the quotation.

Pairing hooks with webbing
The aluminum snap hook shown (DEWIN hook catalog p. 3) is a companion part we review separately; it is not automatically included with a hook or strap order. If the hook will be sewn into your own webbing, tell us how the end is finished. For complete assemblies, see custom tie-down straps.
Snap hook resources


Model drawings
This panel gives an original generic schematic to help you plan a snap hook specification. When you request a quote, you can attach your own configuration drawing so we can review it against the hook you need. The catalog photos on this page are not dimension drawings.
Specification sketch
Illustrative schematic — not to scale. Not an approved production drawing.
- L (in) — overall body length of the hook, measured along the spine to the end of the closed eye.
- G (in) — gate opening, the clearance when the hinged gate is pushed open.
- W (in) — width of the closed attachment eye where the webbing or mating part connects.
Buyer specification fields
- Webbing interface or eye width (in)
- Overall length (in)
- Opening/gate clearance (in)
- Body or wire thickness (in)
- Material grade, finish or coating chemistry
- Component-specific load marking/test scope
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). This sketch explains where each dimension is measured; it does not state any supply size.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
Attach your own configuration drawing when you request a quote, and the matched production drawing is reviewed with the quotation.
Third-party reference
Used only to learn how buyers format specification fields. Competitor values are not DEWIN specifications, and no ratings or dimensions from it are copied into our product specs.
Factory process footage
Our Vietnam factory runs webbing looms, strap sewing and assembly, and a tensile-test machine. Process footage shows how we work; it is not a performance test of any snap hook or SKU. If you would like to see factory operations relevant to your order, mention it in your inquiry.
Hook catalog


Tell us which family fits your application, and we confirm the selected configuration in your quote. Use Send Inquiry to name the hook you need.
Why send us your hook brief
Our factory team in Vietnam works from your drawing or sample first, then confirms what can be matched. Here is how the review is handled.
Drawing-first review
We compare your drawing or sample with the opening, gate and body before quoting.
Component scope stated
We separate the hook from the strap and say when a requirement belongs to the assembly.
Photo and model mapping
A photo is matched to a model and drawing before it is used as a specification.
Direct factory contact
Your questions about packing, terms and documents go to our factory team.
Customer brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page. Send Inquiry to talk about your own project.





Snap hook questions
How long does production take?
Timing depends on the hook, material, finish and quantity. Send your drawing or sample photo and order details, and the lead time is confirmed in the actual quote.
Can I get a sample after I place an order?
Sample approval is a step before production. Tell us what you need to compare, such as opening shape, gate action or finish, and we confirm sample terms with your quote.
How long does shipping take?
Shipping time depends on quantity, packing and destination. Give us your U.S. delivery location and the shipping method and timing are confirmed in the quote.
How do I check the status of my order?
Once an order is confirmed, ask the factory team handling your inquiry for an update. Include your order details so we can find it quickly.
Can I request samples of a snap hook?
You can ask. Send the webbing slot, hook opening, material and finish you need, plus a drawing or photo if you have one. Whether a sample is available, and on what terms, is confirmed with your quote. See also our contact page.
Snap hook buying guides
Three guides for buyers specifying hooks, webbing and tie-down straps, dated November 15, 2026. You can also visit the blog for current posts.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you describe the webbing your hook will be paired with.
Tie-Down Hook and Ring Selection
A guide to the anchor interface: how hook and ring types connect to the vehicle or load.
U.S. Tie-Down Strap Specification Worksheet
A worksheet to prepare your purchasing brief before you send an inquiry.