Stainless Steel Snap Hooks
We handle a stainless steel snap hook request as a component. Before we quote, we review the material grade, gate construction, attachment eye and gate opening against your drawing or sample. Send what you have, even if it is only a photo or a sample description.
Settle the Hook Before the Strap
A stainless steel snap hook is a hardware component, and its grade, gate and eye shape decide whether it fits your webbing end or your anchor point. Our factory team in Vietnam asks you to settle those details first, so the hook, drawing and photo all describe the same part before anything is quoted.
Select a Snap Hook Configuration
The DEWIN hook catalog (page 3) shows a steel spring snap-hook family with stainless steel listed as an option. Choose the starting point that matches your request, then tell us the gate construction, gate opening, wire diameter or plate thickness, attachment eye direction, latch or weld-seam detail, and the stainless grade and surface finish you need. We confirm the configuration with your quotation. You can also send a catalog code or partial information.
Steel Spring Snap-Hook Family
The family shown on page 3 of the DEWIN hook catalog, with stainless steel listed as an option. Grade, gate opening, eye and finish are specified with your quotation.
Loose Hook Component
For buyers who source the hook separately and sew, rivet or assemble it into their own product. Send your drawing, sample photo or sample description.
Hook on a Finished Strap
If you need the hook already fitted to webbing, see our ratchet straps or custom tie-down straps, then send the end-fitting requirement with your inquiry.
Confirm the Material and Finish
Stainless steel is a family of materials, not a single specification. For each hook, we ask which grade you need, how the surface should be finished and whether a material document is expected. We then record the answer against your drawing before samples are discussed. The structural sketch in the Drawings tab below shows the dimensions to name.
Check the Gate and the Eye
Before you approve a sample, compare the gate opening with the fitting it must clip onto, and the attachment eye with the webbing or hardware it must join. The gate or weld-seam detail and the eye direction should match the drawing you send, and the sample should be the same part.
Need a finished strap instead of a loose hook? See our ratchet straps or custom tie-down straps.
Send Inquiry
Tell us the hook style, gate opening, eye type, material grade, quantity and destination. Partial information is welcome.
How an Inquiry Moves
Our factory team at Dewin Technology Company Limited follows these five steps. Terms for each order are confirmed with your quote.
- 1
Requirements and Design
You send the hook style, material needs, drawings or photos.
- 2
Pre-Production Specification Review
We match the drawing, material and photo to one hook.
- 3
Sample Approval
You check the sample against the approved specification.
- 4
Production
The order is made to the approved specification.
- 5
Shipping and Payment Review
We review shipping and payment arrangements with you.
What to Specify for Your Quotation
Page 3 of the DEWIN hook catalog lists a steel spring snap-hook family and names stainless steel as an option. Because stainless steel covers several grades, we ask you to name the details that matter to your application: the stainless grade and surface finish, the body and gate construction, the attachment eye type, the gate opening and any document you expect with the order. Dimensions for short hardware are given in inches (in). A hook's own specification is separate from the rating of any finished strap it is sewn into, so tell us whether you need the hook alone or fitted to webbing. When you are ready, Send Inquiry with a drawing, a photo or a sample description, and our factory team will confirm the configuration with your quotation.
Packaging and Accessories
Hook Packing
Bag, box or carton packing for loose hooks is agreed in the quotation for your order. Tell us how you receive and store hardware, and whether you need labeling or private-label marking.
Related Components and Accessories
Our hardware catalog also covers J hooks, S hooks, D rings and flat hooks, and webbing can be paired with a snap hook. Each companion part is reviewed separately and is not automatically included with a snap hook. Tell our factory team in Vietnam which related parts your U.S. order requires. The exact items, quantities and compatibility are confirmed in the quotation for that configuration.
Snap Hook Resources
A catalog family reference and a photo from our factory in Vietnam. Your exact configuration is specified with your quotation.


Specification sketch
Reading the sketch
- L (in) — symbolic overall body length of the hook.
- G (in) — symbolic gate opening, the clearance when the gate is open.
- W (in) — symbolic width of the closed attachment eye.
Buyer specification fields
- Webbing interface or eye width (in)
- Overall length (in)
- Opening/gate clearance (in)
- Body or wire thickness (in)
- Material grade, finish or coating chemistry
- Component-specific load marking/test scope
Lengths of finished long straps and rolls use documented whole feet (ft). Local component and short-end dimensions use inches (in). This sketch explains the dimensions to name. It does not confirm any supply size.
We check the drawing revision and sample for each metal fitting before quoting U.S. orders. Dimensions and ratings are confirmed for the quoted configuration.
This original generic schematic explains the geometry of a snap hook. When you request a quote, attach your own configuration drawing so we can review your exact hook against it.
Third-party reference
Third-party reference — US Cargo Control specification reference
Third-party values are not DEWIN specifications. No competitor ratings or dimensions are copied into our product specs.

Our factory team can share process footage from our Vietnam factory, such as webbing looms, strap sewing and assembly. Process footage shows how we work. It is not a performance test of a specific hook or a rating for any configuration. Ask for it with your inquiry.

Page 3 of the DEWIN hook catalog lists a steel spring snap-hook family and names stainless steel as an option. The hardware catalog also covers J hooks, S hooks, D rings and flat hooks. Tell our factory team which reference or configuration you want, and we confirm it with your quotation.
Why Send Your Hook Request to Our Factory
We keep your drawing, photo and specification notes together so buyers and the factory team talk about the same part.
Drawing-First Review
We ask for a drawing or photo before assigning a specification to your request.
Photo-to-Model Matching
A photo is only attached to a hook once it is confirmed to show that exact model.
Component Kept Separate
Hook details are recorded apart from any finished strap, so the two are never confused.
Documents on Request
Tell us which supporting documents you need, and we confirm what can be provided for your order.
Customer Brands
These are DEWIN customer brands. The authorized catalog images below identify our company-level customer relationships; they do not establish a purchase, approval or load rating for the specific product category on this page.
Snap Hook Questions
What is the lead time for stainless steel snap hooks?
Lead time depends on the hook model, material, finish, quantity and any custom marking. Send the specification and quantity, and we confirm timing with your actual quote.
Can I get a sample after placing an order?
Sample arrangements are discussed after we review your hook specification and drawing. Whether a sample is offered, and on what terms, is confirmed in the quote for your project.
How long does shipping take?
Shipping time depends on the destination, order size and shipping method. Include your delivery location in your inquiry, and we review the options with you.
How will I know the status of my order?
Our factory team updates you directly during the review, sample and production steps. Reply to the same thread with your hook details so each update refers to the right order.
Can I request samples of a specific hook?
You can request a sample of a specific hook by sending its drawing or photo, material needs, gate opening and eye type. We confirm whether it can be arranged and under what terms.
Related Articles
Three guides on specifying hooks, webbing and U.S. tie-down strap requirements.
Polyester, Nylon and Polypropylene Webbing
A material comparison to help you name the right webbing in a purchasing brief.
November 15, 2026
Tie-Down Hook and Ring Selection
A guide to matching hook and ring types to the anchor interfaces on your equipment.
November 15, 2026
U.S. Tie-Down Strap Specification Worksheet
A worksheet to help you prepare a complete purchasing brief before you send an inquiry.
November 15, 2026


